28 May, 2010
1 commit
-
Some workloads that create a large number of small files tend to assign
too many pages to node 0 (multi-node systems). Part of the reason is that
the rotor (in cpuset_mem_spread_node()) used to assign nodes starts at
node 0 for newly created tasks.This patch changes the rotor to be initialized to a random node number of
the cpuset.[akpm@linux-foundation.org: fix layout]
[Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration]
Signed-off-by: Jack Steiner
Signed-off-by: Lee Schermerhorn
Cc: Christoph Lameter
Cc: Pekka Enberg
Cc: Paul Menage
Cc: Jack Steiner
Cc: Robin Holt
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
26 May, 2010
1 commit
-
It doesn't work on big-endian - those architectures don't define
__LITTLE_ENDIAN.Cc: Joakim Tjernlund
Reported-by: Stephen Rothwell
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 May, 2010
8 commits
-
Since crc32.c contains a nifty test program that can be executed in user
space, make sure endian detection works reliably in user space too.Signed-off-by: Joakim Tjernlund
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Precompute more crc32 values(0xcc00, 0xcc0000 and 0xcc000000) into tables.
This increases the table size from 1KB to 4KB but the performance benfit
makes it worth it:28% faster on MPC8321, 266 MHz
2x faster on Core 2 Duo, 3.1GHz[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joakim Tjernlund
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
hex_to_bin() is a little method which converts hex digit to its actual
value. There are plenty of places where such functionality is needed.[akpm@linux-foundation.org: use tolower(), saving 3 bytes, test the more common case first - it's quicker]
[akpm@linux-foundation.org: relocate tolower to make it even faster! (Joe)]
Signed-off-by: Andy Shevchenko
Cc: Tilman Schmidt
Cc: Duncan Sands
Cc: Eric W. Biederman
Cc: Greg Kroah-Hartman
Cc: "Richard Russon (FlatCap)"
Cc: John W. Linville
Cc: Len Brown
Cc: Joe Perches
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Reduce char linebuf[200] to the actual size required., which is 32 * 3 + 2
+ 32 + 1, ie: linebuf[131].Change examples to use bool true not int 1.
Align multiline argument indentation to open parenthesis.
Use temporary for ptr[j] so trigraph fits on single line.
Convert printk ptr from %*p, (int)(2 * sizeof(void *)) to %p as %p uses
the same calculation for size.Signed-off-by: Joe Perches
Cc: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Florian Ragwitz
Cc: Jason Baron
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This doesn't change behavior at all. In the original code, if nwords was
zero then ddebug_parse_query() would return -EINVAL, now we just do it
earlier.Signed-off-by: Dan Carpenter
Acked-by: Jason Baron
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Mark static functions with noinline_for_stack
Before:
akpm:/usr/src/25> objdump -d lib/vsprintf.o | perl scripts/checkstack.pl
0x00000e82 pointer [vsprintf.o]: 344
0x0000198c pointer [vsprintf.o]: 344
0x000025d6 scnprintf [vsprintf.o]: 216
0x00002648 scnprintf [vsprintf.o]: 216
0x00002565 snprintf [vsprintf.o]: 208
0x0000267c sprintf [vsprintf.o]: 208
0x000030a3 bprintf [vsprintf.o]: 208
0x00003b1e sscanf [vsprintf.o]: 208
0x00000608 number [vsprintf.o]: 136
0x00000937 number [vsprintf.o]: 136After:
akpm:/usr/src/25> objdump -d lib/vsprintf.o | perl scripts/checkstack.pl
0x00000a7c symbol_string [vsprintf.o]: 248
0x00000ae8 symbol_string [vsprintf.o]: 248
0x00002310 scnprintf [vsprintf.o]: 216
0x00002382 scnprintf [vsprintf.o]: 216
0x0000229f snprintf [vsprintf.o]: 208
0x000023b6 sprintf [vsprintf.o]: 208
0x00002ddd bprintf [vsprintf.o]: 208
0x00003858 sscanf [vsprintf.o]: 208
0x00000625 number [vsprintf.o]: 136
0x00000954 number [vsprintf.o]: 136Signed-off-by: Joe Perches
Cc: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan
Acked-by: WANG Cong
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
22 May, 2010
9 commits
-
* git://git.infradead.org/iommu-2.6:
intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables
intel-iommu: Combine the BIOS DMAR table warning messages
panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I')
panic: Allow warnings to set different taint flags
intel-iommu: intel_iommu_map_range failed at very end of address space
intel-iommu: errors with smaller iommu widths
intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled
intel-iommu: use physfn to search drhd for VF
intel-iommu: Print out iommu seq_id
intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported
intel-iommu: Avoid global flushes with caching mode.
intel-iommu: Use correct domain ID when caching mode is enabled
intel-iommu mistakenly uses offset_pfn when caching mode is enabled
intel-iommu: use for_each_set_bit()
intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl. -
* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
kdb,debug_core: Allow the debug core to receive a panic notification
MAINTAINERS: update kgdb, kdb, and debug_core info
debug_core,kdb: Allow the debug core to process a recursive debug entry
printk,kdb: capture printk() when in kdb shell
kgdboc,kdb: Allow kdb to work on a non open console port
kgdb: Add the ability to schedule a breakpoint via a tasklet
mips,kgdb: kdb low level trap catch and stack trace
powerpc,kgdb: Introduce low level trap catching
x86,kgdb: Add low level debug hook
kgdb: remove post_primary_code references
kgdb,docs: Update the kgdb docs to include kdb
kgdboc,keyboard: Keyboard driver for kdb with kgdb
kgdb: gdb "monitor" -> kdb passthrough
sparc,sunzilog: Add console polling support for sunzilog serial driver
sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
kgdb,8250,pl011: Return immediately from console poll
kgdb: core changes to support kdb
kdb: core for kgdb back end (2 of 2)
kdb: core for kgdb back end (1 of 2)
kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
... -
It only makes sense for uevent_helper to get events
in the intial namespaces. It's invocation is not
per namespace and it is not clear how we could make
it's invocation namespace aware.Signed-off-by: Eric W. Biederman
Acked-by: David S. Miller
Signed-off-by: Greg Kroah-Hartman -
Utilize netlink_broacast_filtered to allow sending hotplug events
in the proper namespace.Signed-off-by: Eric W. Biederman
Acked-by: David S. Miller
Signed-off-by: Greg Kroah-Hartman -
Open a copy of the uevent kernel socket in each network
namespace so we can send uevents in all network namespaces.Signed-off-by: Eric W. Biederman
Acked-by: David S. Miller
Signed-off-by: Greg Kroah-Hartman -
Add some in-line comments to explain the new infrastructure, which
was introduced to support sysfs directory tagging with namespaces.
I think an overall description someplace might be good too, but it
didn't really seem to fit into Documentation/filesystems/sysfs.txt,
which appears more geared toward users, rather than maintainers, of
sysfs.(Tejun, please let me know if I can make anything clearer or failed
altogether to comment something that should be commented.)Signed-off-by: Serge E. Hallyn
Cc: Eric W. Biederman
Cc: Tejun Heo
Signed-off-by: Greg Kroah-Hartman -
The problem. When implementing a network namespace I need to be able
to have multiple network devices with the same name. Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.What this patch does is to add an additional tag field to the
sysfs dirent structure. For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible. Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded. Which means I need
a simple race free way to setup those directories as tagged.To achieve a reace free design all tagged directories are created
and managed by sysfs itself.Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid- Implement mount_ns() which returns the ns of the calling process
so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.Everything else is left up to sysfs and the driver layer.
For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.The work needed in sysfs is more extensive. At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent. Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.Currently only directories which hold kobjects, and
symlinks are supported. There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.Signed-off-by: Eric W. Biederman
Signed-off-by: Benjamin Thery
Signed-off-by: Greg Kroah-Hartman -
Move complete knowledge of namespaces into the kobject layer
so we can use that information when reporting kobjects to
userspace.Signed-off-by: Eric W. Biederman
Signed-off-by: Greg Kroah-Hartman -
Of the three uses of kref_set in the kernel:
One really should be kref_put as the code is letting go of a
reference,
Two really should be kref_init because the kref is being
initialised.This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.Signed-off-by: NeilBrown
Acked-by: Mimi Zohar
Acked-by: Serge Hallyn
Signed-off-by: Greg Kroah-Hartman
21 May, 2010
5 commits
-
* git://git.infradead.org/mtd-2.6: (154 commits)
mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips
mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset ID
mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case value
mtd: update gfp/slab.h includes
jffs2: Stop triggering block erases from jffs2_write_super()
jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger()
jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases
jffs2: Require jffs2_garbage_collect_trigger() to be called with lock held
jffs2: Wake GC thread when there are blocks to be erased
jffs2: Erase pending blocks in GC pass, avoid invalid -EIO return
jffs2: Add 'work_done' return value from jffs2_erase_pending_blocks()
mtd: mtdchar: Do not corrupt backing device of device node inode
mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messages
drivers/mtd: Use kmemdup
mtd: cfi_cmdset_0002: Fix argument order in bootloc warning
mtd: nand: add Toshiba TC58NVG0 device ID
pcmciamtd: add another ID
pcmciamtd: coding style cleanups
pcmciamtd: fixing obvious errors
mtd: chips: add SST39WF160x NOR-flashes
...Trivial conflicts due to dev_node removal in drivers/mtd/maps/pcmciamtd.c
-
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a recursive fault is
to have a low level "first opportunity handler" do_trap_or_bp() handler.Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.Also added was a die notification for oops such that kdb can catch an
oops for analysis.There appeared to be no obvious way to pass the struct pt_regs from
the original exception back to the stack back tracer, so a special
case was added to show_stack() for when kdb is active because you
generally desire to generally look at the back trace of the original
exception.Signed-off-by: Jason Wessel
Acked-by: Ralf Baechle -
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a triple fault is
to have a low level "first opportunity handler" in the int3 exception
handler.Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.CC: Ingo Molnar
CC: Thomas Gleixner
CC: H. Peter Anvin
CC: x86@kernel.org
Signed-off-by: Jason Wessel -
This patch adds in the kdb PS/2 keyboard driver. This was mostly a
direct port from the original kdb where I cleaned up the code against
checkpatch.pl and added the glue to stitch it into kgdb.This patch also enables early kdb debug via kgdbwait and the keyboard.
All the access to configure kdb using either a serial console or the
keyboard is done via kgdboc.If you want to use only the keyboard and want to break in early you
would add to your kernel command arguments:kgdboc=kbd kgdbwait
If you wanted serial and or the keyboard access you could use:
kgdboc=kbd,ttyS0
You can also configure kgdboc as a kernel module or at run time with
the sysfs where you can activate and deactivate kgdb.Turn it on:
echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdbocTurn it off:
echo "" > /sys/module/kgdboc/parameters/kgdbocSigned-off-by: Jason Wessel
Reviewed-by: Dmitry Torokhov -
These are the minimum changes to the kgdb core in order to enable an
API to connect a new front end (kdb) to the debug core.This patch introduces the dbg_kdb_mode variable controls where the
user level I/O is routed. It will be routed to the gdbstub (kgdb) or
to the kdb front end which is a simple shell available over the kgdboc
connection.You can switch back and forth between kdb or the gdb stub mode of
operation dynamically. From gdb stub mode you can blindly type
"$3#33", or from the kdb mode you can enter "kgdb" to switch to the
gdb stub.The logic in the debug core depends on kdb to look for the typical gdb
connection sequences and return immediately with KGDB_PASS_EVENT if a
gdb serial command sequence is detected. That should allow a
reasonably seamless transition between kdb -> gdb without leaving the
kernel exception state. The two gdb serial queries that kdb is
responsible for detecting are the "?" and "qSupported" packets.CC: Ingo Molnar
Signed-off-by: Jason Wessel
Acked-by: Martin Hicks
19 May, 2010
3 commits
-
WARN() is used in some places to report firmware or hardware bugs that
are then worked-around. These bugs do not affect the stability of the
kernel and should not set the flag for TAINT_WARN. To allow for this,
add WARN_TAINT() and WARN_TAINT_ONCE() macros that take a taint number
as argument.Architectures that implement warnings using trap instructions instead
of calls to warn_slowpath_*() now implement __WARN_TAINT(taint)
instead of __WARN().Signed-off-by: Ben Hutchings
Acked-by: Helge Deller
Tested-by: Paul Mundt
Signed-off-by: David Woodhouse -
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, pat: Update the page flags for memtype atomically instead of using memtype_lock
x86, pat: In rbt_memtype_check_insert(), update new->type only if valid
x86, pat: Migrate to rbtree only backend for pat memtype management
x86, pat: Preparatory changes in pat.c for bigger rbtree change
rbtree: Add support for augmented rbtrees -
…el/git/tip/linux-2.6-tip
* 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hweight: Use a 32-bit popcnt for __arch_hweight32()
arch, hweight: Fix compilation errors
x86: Add optimized popcnt variants
bitops: Optimize hweight() by making use of compile-time evaluation
18 May, 2010
3 commits
-
…/git/tip/linux-2.6-tip
* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix LOCK_PREFIX_HERE for uniprocessor build
x86, atomic64: In selftest, distinguish x86-64 from 586+
x86-32: Fix atomic64_inc_not_zero return value convention
lib: Fix atomic64_inc_not_zero test
lib: Fix atomic64_add_unless return value convention
x86-32: Fix atomic64_add_unless return value convention
lib: Fix atomic64_add_unless test
x86: Implement atomic[64]_dec_if_positive()
lib: Only test atomic64_dec_if_positive on archs having it
x86-32: Rewrite 32-bit atomic64 functions in assembly
lib: Add self-test for atomic64_t
x86-32: Allow UP/SMP lock replacement in cmpxchg64
x86: Add support for lock prefix in alternatives -
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
rcu: remove all rcu head initializations, except on_stack initializations
rcu head introduce rcu head init on stack
Debugobjects transition check
rcu: fix build bug in RCU_FAST_NO_HZ builds
rcu: RCU_FAST_NO_HZ must check RCU dyntick state
rcu: make SRCU usable in modules
rcu: improve the RCU CPU-stall warning documentation
rcu: reduce the number of spurious RCU_SOFTIRQ invocations
rcu: permit discontiguous cpu_possible_mask CPU numbering
rcu: improve RCU CPU stall-warning messages
rcu: print boot-time console messages if RCU configs out of ordinary
rcu: disable CPU stall warnings upon panic
rcu: enable CPU_STALL_VERBOSE by default
rcu: slim down rcutiny by removing rcu_scheduler_active and friends
rcu: refactor RCU's context-switch handling
rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
rcu: fix now-bogus rcu_scheduler_active comments.
rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
rcu: ignore offline CPUs in last non-dyntick-idle CPU check
... -
…/kernel/git/tip/linux-2.6-tip
* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
debugobjects: Section mismatch cleanup
16 May, 2010
1 commit
-
mempool_alloc() can return null in atomic case.
Signed-off-by: Denis Kirjanov
Cc: Joern Engel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 May, 2010
1 commit
-
If there are no active threasd using a semaphore, it is always correct
to unqueue blocked threads. This seems to be what was intended in the
undo code.What was done instead, was to look for a sem count of zero - this is an
impossible situation, given that at least one thread is known to be
queued on the semaphore. The code might be correct as written, but it's
hard to reason about and it's not what was intended (otherwise the goto
out would have been unconditional).Go for checking the active count - the alternative is not worth the
headache.Signed-off-by: Michel Lespinasse
Signed-off-by: David Howells
Signed-off-by: Linus Torvalds
11 May, 2010
3 commits
-
Implement a basic state machine checker in the debugobjects.
This state machine checker detects races and inconsistencies within the "active"
life of a debugobject. The checker only keeps track of the current state; all
the state machine logic is kept at the object instance level.The checker works by adding a supplementary "unsigned int astate" field to the
debug_obj structure. It keeps track of the current "active state" of the object.The only constraints that are imposed on the states by the debugobjects system
is that:- activation of an object sets the current active state to 0,
- deactivation of an object expects the current active state to be 0.For the rest of the states, the state mapping is determined by the specific
object instance. Therefore, the logic keeping track of the state machine is
within the specialized instance, without any need to know about it at the
debugobject level.The current object active state is changed by calling:
debug_object_active_state(addr, descr, expect, next)
where "expect" is the expected state and "next" is the next state to move to if
the expected state is found. A warning is generated if the expected is not
found.Signed-off-by: Mathieu Desnoyers
Reviewed-by: Thomas Gleixner
Acked-by: David S. Miller
CC: "Paul E. McKenney"
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan
Signed-off-by: Paul E. McKenney -
The CPU_STALL_VERBOSE kernel configuration parameter was added to
2.6.34 to identify any preempted/blocked tasks that were preventing
the current grace period from completing when running preemptible
RCU. As is conventional for new configurations parameters, this
defaulted disabled. It is now time to enable it by default.Signed-off-by: Paul E. McKenney
-
There is no need to disable lockdep after an RCU lockdep splat,
so remove the debug_lockdeps_off() from lockdep_rcu_dereference().
To avoid repeated lockdep splats, use a static variable in the inlined
rcu_dereference_check() and rcu_dereference_protected() macros so that
a given instance splats only once, but so that multiple instances can
be detected per boot.This is controlled by a new config variable CONFIG_PROVE_RCU_REPEATEDLY,
which is disabled by default. This provides the normal lockdep behavior
by default, but permits people who want to find multiple RCU-lockdep
splats per boot to easily do so.Requested-by: Eric Paris
Signed-off-by: Lai Jiangshan
Tested-by: Eric Paris
Signed-off-by: Paul E. McKenney
10 May, 2010
1 commit
-
Conflicts:
drivers/mtd/mtdcore.cPull in the bdi fixes and ARM platform changes that other outstanding
patches depend on.
30 Apr, 2010
1 commit
-
Merge reason:
Conflict between LOCK_PREFIX_HERE and relative alternatives
pointersResolved Conflicts:
arch/x86/include/asm/alternative.h
arch/x86/kernel/alternative.cSigned-off-by: H. Peter Anvin
25 Apr, 2010
3 commits
-
Add a missing EXPORT_SYMBOL.
I must be the first person that wants to use this function :-)
Signed-off-by: Hans Verkuil
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch fixes 2 issues with the LZO decompressor:
- It doesn't handle the case where a block isn't compressed at all. In
this case, calling lzo1x_decompress_safe will fail, so we need to just
use memcpy() instead (the upstream LZO code does something similar)- Since commit 54291362d2a5738e1b0495df2abcb9e6b0563a3f ("initramfs: add
missing decompressor error check") , the decompressor return code is
checked in the init/initramfs.c The LZO decompressor didn't return the
expected value, causing the initramfs code to falsely believe a
decompression error occuredSigned-off-by: Albin Tonnerre
Tested-by: bert schulze
Cc: "H. Peter Anvin"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
memset() is called with the wrong address and the kernel panics.
Signed-off-by: Changli Gao
Cc: Patrick McHardy
Acked-by: David Rientjes
Cc:
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
