10 Oct, 2020
1 commit
-
For the touch chip use on the new OLED panel(rm67199), when touch
the screen, GT1151Q sends a falling edge pulse via INT pin.For code logic, it will read the touch internal config data, the bit[1~0]
of config[6] means the interrupt trigger method. For this GT1151Q, this
bit[1~0] is 3 in default, which means IRQ_TYPE_LEVEL_HIGH, which not
match with the datasheet and the hardware behavior. Since the default
level of the INT pin is high, so after driver probe, a lot of useless
touch interrupts keep triggered.
To fix this, need to update the touch firmware. Set the bit[1~0] of config[6]
to value 1. Since we lack the touch firmware file, as a workaround, add a
property "edge-failling-trigger" in dts file, if has this property, force
set the IRQ_TYPE_EDGE_FALLING.Signed-off-by: Haibo Chen
08 Oct, 2020
1 commit
-
* tag 'v5.4.70': (3051 commits)
Linux 5.4.70
netfilter: ctnetlink: add a range check for l3/l4 protonum
ep_create_wakeup_source(): dentry name can change under you...
...Conflicts:
arch/arm/mach-imx/pm-imx6.c
arch/arm64/boot/dts/freescale/imx8mm-evk.dts
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
drivers/crypto/caam/caamalg.c
drivers/gpu/drm/imx/dw_hdmi-imx.c
drivers/gpu/drm/imx/imx-ldb.c
drivers/gpu/drm/imx/ipuv3/ipuv3-crtc.c
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
drivers/net/ethernet/freescale/enetc/enetc.c
drivers/net/ethernet/freescale/enetc/enetc_pf.c
drivers/thermal/imx_thermal.c
drivers/usb/cdns3/ep0.c
drivers/xen/swiotlb-xen.c
sound/soc/fsl/fsl_esai.c
sound/soc/fsl/fsl_sai.cSigned-off-by: Jason Liu
07 Oct, 2020
2 commits
-
[ Upstream commit 996d585b079ad494a30cac10e08585bcd5345125 ]
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid.
Signed-off-by: Vincent Huang
Fixes: 6c77545af100 ("Input: trackpoint - add new trackpoint variant IDs")
Reviewed-by: Harry Cutts
Tested-by: Harry Cutts
Link: https://lore.kernel.org/r/20200924053013.1056953-1-vincent.huang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
commit 5fc27b098dafb8e30794a9db0705074c7d766179 upstream.
Touchpad on this laptop is not detected properly during boot, as PNP
enumerates (wrongly) AUX port as disabled on this machine.Fix that by adding this board (with admittedly quite funny DMI
identifiers) to nopnp quirk list.Reported-by: Andrés Barrantes Silman
Signed-off-by: Jiri Kosina
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2009252337340.3336@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman
23 Sep, 2020
2 commits
-
commit c4440b8a457779adeec42c5e181cb4016f19ce0f upstream.
The keyboard drops keypresses early during boot unless both the nomux
and reset quirks are set. Add DMI table entries for this.BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085
Signed-off-by: Hans de Goede
Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
commit 6c77545af100a72bf5e28142b510ba042a17648d upstream.
Add trackpoint variant IDs to allow supported control on Synaptics
trackpoints.Signed-off-by: Vincent Huang
Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman
26 Aug, 2020
1 commit
-
[ Upstream commit 4aec14de3a15cf9789a0e19c847f164776f49473 ]
When I cat parameter 'proto' by sysfs, it displays as follows. It's
better to add a newline for easy reading.root@syzkaller:~# cat /sys/module/psmouse/parameters/proto
autoroot@syzkaller:~#Signed-off-by: Xiongfeng Wang
Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
21 Aug, 2020
2 commits
-
[ Upstream commit ea38f06e0291986eb93beb6d61fd413607a30ca4 ]
Currently when the call to fsp_reg_write fails -EIO is not being returned
because the count is being returned instead of the return value in retval.
Fix this by returning the value in retval instead of count.Addresses-Coverity: ("Unused value")
Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad")
Signed-off-by: Colin Ian King
Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
According to the define: typedef irqreturn_t (*irq_handler_t)(int, void *);
correct the two parameter definition of tpd_eint_handler.If not, Android will get the following dump since Android set the CONFIG_CFI_CLANG
[ 49.905828] ------------[ cut here ]------------ [1088/49494]
[ 49.910457] CFI failure (target: tpd_eint_handler+0x0/0x4 [synaptics_dsx_i2c]):
[ 49.917785] WARNING: CPU: 0 PID: 0 at kernel/cfi.c:29 __ubsan_handle_cfi_check_fail+0x4c/0x54
[ 49.926299] Modules linked in: vvcam(O) synaptics_dsx_i2c pcie8xxx mlan
[ 49.932912] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 5.4.47-00119-gfd9c870e583c #1
[ 49.941948] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 49.947252] pstate: 60400085 (nZCv daIf +PAN -UAO)
[ 49.952036] pc : __ubsan_handle_cfi_check_fail+0x4c/0x54
[ 49.957340] lr : __ubsan_handle_cfi_check_fail+0x4c/0x54
[ 49.962642] sp : ffff800010003d80
[ 49.965956] x29: ffff800010003d80 x28: ffff80001154e76c
[ 49.971268] x27: ffff800012560140 x26: ffff000177c28c00
[ 49.976572] x25: 0000000000000003 x24: ffff8000096fb394
[ 49.981876] x23: 0000000000000059 x22: ffff8000096fb000
[ 49.987180] x21: c6783f1d911d68d7 x20: ffff8000126a90c0
[ 49.992483] x19: ffff8000096fb394 x18: ffff00017f338058
[ 49.997787] x17: 0000000000000041 x16: ffff800011526a2c
[ 50.003099] x15: ffff800011e308e7 x14: 0000000000000050
[ 50.008403] x13: 0000000000003537 x12: 0000000000000000
[ 50.013706] x11: 0000000000000000 x10: 00000000ffffffff
[ 50.019010] x9 : 6320576a23b1fd00 x8 : 6320576a23b1fd00
[ 50.024314] x7 : 735b203478302f30 x6 : ffff800012772273
[ 50.029617] x5 : 0000000000000000 x4 : 0000000000000008
[ 50.034921] x3 : ffff80001155978c x2 : fffffffffffffc04
[ 50.040225] x1 : 0000000000000000 x0 : 0000000000000043
[ 50.045529] Call trace:
[ 50.047978] __ubsan_handle_cfi_check_fail+0x4c/0x54
[ 50.052940] __cfi_check_fail+0x30/0x38 [synaptics_dsx_i2c]
[ 50.058509] __cfi_check+0x32c/0x358 [synaptics_dsx_i2c]
[ 50.063817] __handle_irq_event_percpu+0x330/0x37c
[ 50.068600] handle_irq_event+0x60/0xd8
[ 50.072428] handle_level_irq+0x178/0x2dc
[ 50.076430] generic_handle_irq+0x44/0x8c
[ 50.080433] mxc_gpio_irq_handler+0x68/0x10c
[ 50.084695] mx3_gpio_irq_handler+0xf8/0x200
[ 50.088957] __handle_domain_irq+0xa0/0x108
[ 50.093132] efi_header_end+0xb8/0x15c
[ 50.096873] el1_irq+0x104/0x200
[ 50.100103] cpuidle_enter_state+0x178/0x314
[ 50.104365] cpuidle_enter+0x38/0x50
[ 50.107933] do_idle.llvm.13790858479135427060+0x1a4/0x294
[ 50.113410] cpu_startup_entry+0x24/0x28
[ 50.117327] kernel_init+0x0/0x2ac
[ 50.120723] start_kernel+0x0/0x41c
[ 50.124211] start_kernel+0x3a4/0x41c
[ 50.127865] ---[ end trace b7a14580e01cd817 ]---
[ 50.136267] synaptics_rmi4_sensor_report: spontaneous reset detected
[ 50.139705] imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
[ 50.149756] reboot: Restarting system with command 'bootloader'Reported-by: Jindong Yue
Signed-off-by: Haibo Chen
Reviewed-by: Fugang Duan
29 Jul, 2020
2 commits
-
[ Upstream commit 966334dfc472bdfa67bed864842943b19755d192 ]
This moves the wakeup increment for elan devices to the touch report.
This prevents the drivers from incorrectly reporting a wakeup when the
resume callback resets then device, which causes an interrupt to
occur.Signed-off-by: Derek Basehore
Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit dcb00fc799dc03fd320e123e4c81b3278c763ea5 ]
Tested on my own laptop, touchpad feels slightly more responsive with
this on, though it might just be placebo.Signed-off-by: Ilya Katsnelson
Reviewed-by: Lyude Paul
Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
22 Jul, 2020
3 commits
-
commit 17d51429da722cd8fc77a365a112f008abf4f8b3 upstream.
This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12.
Without nomux, the trackpad behaves as if only one finger is present and
moves the cursor when trying to scroll.Signed-off-by: David Pedersen
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
[ Upstream commit 7842087b0196d674ed877d768de8f2a34d7fdc53 ]
MMS345L is another first generation touch screen from Melfas,
which uses mostly the same registers as MMS152.However, there is some garbage printed during initialization.
Apparently MMS345L does not have the MMS152_COMPAT_GROUP register
that is read+printed during initialization.TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06
On earlier kernel versions the compat group was actually printed as
an ASCII control character, seems like it gets escaped now.But we probably shouldn't print something from a random register.
Add a separate "melfas,mms345l" compatible that avoids reading
from the MMS152_COMPAT_GROUP register. This might also help in case
there is some other device-specific quirk in the future.Signed-off-by: Stephan Gerhold
Reviewed-by: Andi Shyti
Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 1dd5ddc125b4625c3beb8e644ae872445d739bbc ]
The touchscreen on the Cube I15-TC don't match the default display,
with 0,0 touches being reported when touching at the top-right of
the screen.Add a quirk to invert the x coordinate.
Reported-and-tested-by: Arkadiy
Signed-off-by: Sergei A. Trusov
Reviewed-by: Bastien Nocera
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
24 Jun, 2020
2 commits
-
[ Upstream commit e4f4ffa8a98c24a4ab482669b1e2b4cfce3f52f4 ]
This causes a build error with CONFIG_WALNUT because kb_cs and kb_data
were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and
include/asm-ppc").ld.lld: error: undefined symbol: kb_cs
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.ald.lld: error: undefined symbol: kb_data
> referenced by i8042.c:309 (drivers/input/serio/i8042.c:309)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042.c:319 (drivers/input/serio/i8042.c:319)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced 15 more timesPresumably since nobody has noticed this for the last 12 years, there is
not anyone actually trying to use this driver so we can just remove this
special walnut code and use the generic header so it builds for all
configurations.Fixes: 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc")
Reported-by: kbuild test robot
Signed-off-by: Nathan Chancellor
Signed-off-by: Michael Ellerman
Acked-by: Dmitry Torokhov
Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin -
[ Upstream commit 255cdaf73412de13608fb776101402dca68bed2b ]
Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for
ev-ft5726") offset-x and offset-y is supported. Devices using those
offset parameters don't support the offset parameter so we need to add
the NO_REGISTER check for edt_ft5x06_ts_get_defaults().Fixes: b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726")
Signed-off-by: Marco Felsch
Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
19 Jun, 2020
1 commit
-
* tag 'v5.4.47': (2193 commits)
Linux 5.4.47
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
...Conflicts:
arch/arm/boot/dts/imx6qdl.dtsi
arch/arm/mach-imx/Kconfig
arch/arm/mach-imx/common.h
arch/arm/mach-imx/suspend-imx6.S
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
arch/powerpc/include/asm/cacheflush.h
drivers/cpufreq/imx6q-cpufreq.c
drivers/dma/imx-sdma.c
drivers/edac/synopsys_edac.c
drivers/firmware/imx/imx-scu.c
drivers/net/ethernet/freescale/fec.h
drivers/net/ethernet/freescale/fec_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
drivers/net/phy/phy_device.c
drivers/perf/fsl_imx8_ddr_perf.c
drivers/usb/cdns3/gadget.c
drivers/usb/dwc3/gadget.c
include/uapi/linux/dma-buf.hSigned-off-by: Jason Liu
17 Jun, 2020
2 commits
-
[ Upstream commit 642aa86eaf8f1e6fe894f20fd7f12f0db52ee03c ]
The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a"
instead of the already included PNP ID "LEN006c". However, my touchpad
seems to work well without any problems using RMI. So this patch adds the
other PNP ID.Signed-off-by: Dennis Kadioglu
Link: https://lore.kernel.org/r/ff770543cd53ae818363c0fe86477965@mail.eclipso.de
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 3f8f770575d911c989043d8f0fb8dec96360c41c ]
MMS345L is another first generation touch screen from Melfas,
which uses the same registers as MMS152.However, using I2C_M_NOSTART for it causes errors when reading:
i2c i2c-0: sendbytes: NAK bailout.
mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)The driver works fine as soon as I2C_M_NOSTART is removed.
Reviewed-by: Andi Shyti
Signed-off-by: Stephan Gerhold
Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net
[dtor: removed separate mms345l handling, made everyone use standard
transfer mode, propagated the 10bit addressing flag to the read part of the
transfer as well.]
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
03 Jun, 2020
7 commits
-
[ Upstream commit 5caab2da63207d6d631007f592f5219459e3454d ]
Fix to return a negative error code from the input_register_device()
error handling case instead of 0, as done elsewhere in this function.Signed-off-by: Wei Yongjun
Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit d5a5e5b5fa7b86c05bf073acc0ba98fa280174ec ]
Fix a use-after-free noticed by running with KASAN enabled. If
rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among
others) will end up reading from drvdata->attn_data.data, which was
freed and left dangling in rmi_irq_fn().Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by
KASAN") correctly identified and analyzed this bug. However the attempted
fix only NULLed out a local variable, missing the fact that
drvdata->attn_data is a struct, not a pointer.NULL out the correct pointer in the driver data to prevent the attention
functions from copying from it.Fixes: 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN")
Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data")
Signed-off-by: Evan Green
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeid
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 2712c91a54a1058d55c284152b4d93c979b67be6 ]
On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version
"GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and
TrackPoint either do not function or stop functioning a few minutes
after boot. This problem has been noted before, perhaps only occurring
with BIOS 1.57 and later.[1][2][3][4][5]Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago
and although the [BIOS changelog] notes "Fixed an issue of UEFI
touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be
insufficient.Setting i8042.reset=1 or adding 33474HU to the reset list avoids the
issue on my system from either warm or cold boot.[1]: https://bugs.launchpad.net/bugs/1210748
[2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425
[3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200
[4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115
[5]: https://forums.lenovo.com/topic/findpost/27/1337119
[BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txtSigned-off-by: Kevin Locke
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.name
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 38347374ae3f1ec4df56dd688bd603a64e79a0ed ]
According to the file name and Kconfig, a 'k' is missing in this driver
name. It should be "dlink-dir685-touchkeys".Fixes: 131b3de7016b ("Input: add D-Link DIR-685 touchkeys driver")
Signed-off-by: Christophe JAILLET
Reviewed-by: Linus Walleij
Link: https://lore.kernel.org/r/20200412213937.5287-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 764f7f911bf72450c51eb74cbb262ad9933741d8 ]
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers
fixes an issue where controller is stuck in Bluetooth mode and not sending
any inputs.Signed-off-by: Łukasz Patron
Reviewed-by: Cameron Gutman
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 09264098ff153f60866039d60b31d39b66f55a31 ]
input_flush_device() should only be called once the struct file is being
released and no open descriptors remain, but evdev_flush() was calling
it whenever a file descriptor was closed.This caused uploaded force-feedback effects to be erased when a process
did a dup()/close() on the event FD, called system(), etc.Call input_flush_device() from evdev_release() instead.
Reported-by: Mathieu Maret
Signed-off-by: Brendan Shanks
Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ]
Based on available information this uses the singletouch irtouch
protocol. This is tested and confirmed to be fully functional on
the BonXeon TP hardware I have.Signed-off-by: James Hilliard
Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
17 Apr, 2020
2 commits
-
commit ebc68cedec4aead47d8d11623d013cca9bf8e825 upstream.
The Acer Aspire 5738z has a button to disable (and re-enable) the
touchpad next to the touchpad.When this button is pressed a LED underneath indicates that the touchpad
is disabled (and an event is send to userspace and GNOME shows its
touchpad enabled / disable OSD thingie).So far so good, but after re-enabling the touchpad it no longer works.
The laptop does not have an external ps2 port, so mux mode is not needed
and disabling mux mode fixes the touchpad no longer working after toggling
it off and back on again, so lets add this laptop model to the nomux list.Signed-off-by: Hans de Goede
Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
[ Upstream commit da3289044833769188c0da945d2cec90af35e87e ]
The Coreriver TouchCore 360 is like the midas board touchkey, but it is
using a fixed regulator.Signed-off-by: Nick Reitemeyer
Link: https://lore.kernel.org/r/20200121141525.3404-3-nick.reitemeyer@web.de
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
01 Apr, 2020
3 commits
-
commit 1369d0abe469fb4cdea8a5bce219d38cb857a658 upstream.
This laptop (and perhaps other variants of the same model) reports an
SMBus-capable Synaptics touchpad. Everything (including suspend and
resume) works fine when RMI is enabled via the kernel command line, so
let's add it to the whitelist.Signed-off-by: Yussuf Khalil
Link: https://lore.kernel.org/r/20200307213508.267187-1-dev@pp3345.net
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
commit 4134252ab7e2c339a54302b88496cb5a89cdbaec upstream.
We need to refresh timestamp when emitting key autorepeat events, otherwise
they will carry timestamp of the original key press event.Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206929
Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events")
Cc: stable@vger.kernel.org
Reported-by: teika kazura
Tested-by: teika kazura
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
commit 32cf3a610c35cb21e3157f4bbf29d89960e30a36 upstream.
These functions are supposed to return negative error codes but instead
it returns true on failure and false on success. The error codes are
eventually propagated back to user space.Fixes: 48a2b783483b ("Input: add Raydium I2C touchscreen driver")
Signed-off-by: Dan Carpenter
Link: https://lore.kernel.org/r/20200303101306.4potflz7na2nn3od@kili.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman
08 Mar, 2020
1 commit
-
Merge Linux stable release v5.4.24 into imx_5.4.y
* tag 'v5.4.24': (3306 commits)
Linux 5.4.24
blktrace: Protect q->blk_trace with RCU
kvm: nVMX: VMWRITE checks unsupported field before read-only field
...Signed-off-by: Jason Liu
Conflicts:
arch/arm/boot/dts/imx6sll-evk.dts
arch/arm/boot/dts/imx7ulp.dtsi
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
drivers/clk/imx/clk-composite-8m.c
drivers/gpio/gpio-mxc.c
drivers/irqchip/Kconfig
drivers/mmc/host/sdhci-of-esdhc.c
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
drivers/net/can/flexcan.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/mscc/ocelot.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
drivers/net/phy/realtek.c
drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
drivers/perf/fsl_imx8_ddr_perf.c
drivers/tee/optee/shm_pool.c
drivers/usb/cdns3/gadget.c
kernel/sched/cpufreq.c
net/core/xdp.c
sound/soc/fsl/fsl_esai.c
sound/soc/fsl/fsl_sai.c
sound/soc/sof/core.c
sound/soc/sof/imx/Kconfig
sound/soc/sof/loader.c
24 Feb, 2020
1 commit
-
[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ]
The EP0700MLP1 returns bogus data on the first register read access
(reading the threshold parameter from register 0x00):edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40
It ignores writes until then. This patch adds a dummy read after which
the number of sensors and parameter read/writes work correctly.Signed-off-by: Philipp Zabel
Signed-off-by: Marco Felsch
Tested-by: Andy Shevchenko
Reviewed-by: Andy Shevchenko
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
20 Feb, 2020
3 commits
-
commit 5179a9dfa9440c1781816e2c9a183d1d2512dc61 upstream.
The Yoga 11e is using LEN0049, but it doesn't have a trackstick.
Thus, there is no need to create a software top buttons row.
However, it seems that the device works under SMBus, so keep it as part
of the smbus_pnp_ids.Signed-off-by: Benjamin Tissoires
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
commit b8a3d819f872e0a3a0a6db0dbbcd48071042fb98 upstream.
Add touchpad LEN2044 to the list, as it is capable of working with
psmouse.synaptics_intertouch=1Signed-off-by: Gaurav Agrawal
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
commit bf502391353b928e63096127e5fd8482080203f5 upstream.
This supports RMI4 and everything seems to work, including the touchpad
buttons. So, let's enable this by default.Signed-off-by: Lyude Paul
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman
06 Feb, 2020
2 commits
-
[ Upstream commit ce535a2efb48d8d4c4e4b97e2764d7cee73d9b55 ]
We need the of_match table if we want to use the compatible string in
the pmic's child node and get the onkey driver loaded automatically.Signed-off-by: Bartosz Golaszewski
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin -
[ Upstream commit 7f439bc2d7e8c8cc4e1bab08ab7fe1bb73c9b268 ]
We observed a large(order-3) allocation in evdev_open() and it may
cause an OOM kernel panic in kzalloc(), before we getting to the
vzalloc() fallback.Fix it by converting kzalloc()/vzalloc() to kvzalloc() to avoid the
OOM killer logic as we have a vmalloc fallback.InputReader invoked oom-killer: gfp_mask=0x240c2c0
(GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO), nodemask=0, order=3,
oom_score_adj=-900
...
(dump_backtrace) from (show_stack+0x18/0x1c)
(show_stack) from (dump_stack+0x94/0xa8)
(dump_stack) from (dump_header+0x7c/0xe4)
(dump_header) from (out_of_memory+0x334/0x348)
(out_of_memory) from (__alloc_pages_nodemask+0xe9c/0xeb8)
(__alloc_pages_nodemask) from (kmalloc_order_trace+0x34/0x128)
(kmalloc_order_trace) from (__kmalloc+0x258/0x36c)
(__kmalloc) from (evdev_open+0x5c/0x17c)
(evdev_open) from (chrdev_open+0x100/0x204)
(chrdev_open) from (do_dentry_open+0x21c/0x354)
(do_dentry_open) from (vfs_open+0x58/0x84)
(vfs_open) from (path_openat+0x640/0xc98)
(path_openat) from (do_filp_open+0x78/0x11c)
(do_filp_open) from (do_sys_open+0x130/0x244)
(do_sys_open) from (SyS_openat+0x14/0x18)
(SyS_openat) from (__sys_trace_return+0x0/0x10)
...
Normal: 12488*4kB (UMEH) 6984*8kB (UMEH) 2101*16kB (UMEH) 0*32kB
0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 139440kB
HighMem: 206*4kB (H) 131*8kB (H) 42*16kB (H) 2*32kB (H) 0*64kB
0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2608kB
...
Kernel panic - not syncing: Out of memory and no killable processes...Signed-off-by: Miles Chen
Signed-off-by: Dmitry Torokhov
Signed-off-by: Sasha Levin
29 Jan, 2020
2 commits
-
commit 97e24b095348a15ec08c476423c3b3b939186ad7 upstream.
The driver misses a check for devm_thermal_zone_of_sensor_register().
Add a check to fix it.Fixes: e28d0c9cd381 ("input: convert sun4i-ts to use devm_thermal_zone_of_sensor_register")
Signed-off-by: Chuhong Yuan
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman -
commit bcfcb7f9b480dd0be8f0df2df17340ca92a03b98 upstream.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could be used by a
malicious device (or USB descriptor fuzzer) to trigger a NULL-pointer
dereference.Fixes: 1afca2b66aac ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Johan Hovold
Acked-by: Martin Kepplinger
Acked-by: Vladis Dronov
Link: https://lore.kernel.org/r/20191210113737.4016-2-johan@kernel.org
Signed-off-by: Dmitry Torokhov
Signed-off-by: Greg Kroah-Hartman