08 Jan, 2010

1 commit

  • The patch "sbawe: fix memory detection" fixed detection
    for memoryless SB32 cards but broke detection of memory
    above 512KB. This patch fixes the regression.

    The patch has been tested on the SB32 card (CT3670) with
    0MB, 2MB and 8MB memory installed.

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Jaroslav Kysela

    Krzysztof Helt
     

21 Dec, 2009

1 commit

  • Memory amount is increased before a successful write-read
    sequence is done. Thus, 512 kB of onboard memory is detected
    on memoryless cards like SB32.

    Move the increasing of memory counter after successful read
    is done.

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Takashi Iwai

    Krzysztof Helt
     

05 Nov, 2009

1 commit

  • To avoid confusion in control names for the standard analog PC Beep generator
    using a small Internal PC Speaker, rename all related "PC Speaker" and "PC
    Beep" controls to "Beep" only. This name is more universal and can be also
    used on more platforms without confusion.

    Introduce also "Internal Speaker" in ControlNames.txt for systems with
    full-featured build-in internal speaker.

    Signed-off-by: Jaroslav Kysela
    Signed-off-by: Takashi Iwai

    Jaroslav Kysela
     

29 May, 2009

1 commit


14 Apr, 2009

1 commit


24 Mar, 2009

1 commit


23 Feb, 2009

1 commit

  • - add 8kHz / 20 kHz low-pass filter switch control
    - add ALS4000 Mono capture route control
    - add annotations to specs pages
    - improve ALS4000 PM saved regs selection (remove SB dummy register,
    add missing ones)
    - add some missing ALS4000 register defines
    - constify two variables

    Signed-off-by: Andreas Mohr
    Signed-off-by: Takashi Iwai

    Andreas Mohr
     

12 Jan, 2009

2 commits


11 Dec, 2008

1 commit


03 Nov, 2008

1 commit


13 Aug, 2008

1 commit


15 Jul, 2008

2 commits


23 Jun, 2008

1 commit


30 May, 2008

1 commit


24 Apr, 2008

1 commit


29 Feb, 2008

1 commit


01 Feb, 2008

3 commits

  • This header file exists only for some hacks to adapt alsa-driver
    tree. It's useless for building in the kernel. Let's move a few
    lines in it to sound/core.h and remove it.
    With this patch, sound/driver.h isn't removed but has just a single
    compile warning to include it. This should be really killed in
    future.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     
  • sound/isa/sb/sb16_csp.c: In function ‘snd_sb_csp_new’:
    sound/isa/sb/sb16_csp.c:121: warning: ‘version’ may be used uninitialized in this function

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     
  • This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
    2.4 these were useful in providing an easy path to setting the resources,
    but in 2.6 they retain function as a layering violation only.
    This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
    only remaining user of pnp_init_resource_table(), pnp_resource_change() and
    pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
    the tree outide of drivers/pnp itself meaning it makes for more cleanup
    potential inside the PnP layer.
    Thomas Renninger acked their removal from that side, you did from the ALSA
    side (CC list just copied from that thread).
    Against current alsa-kernel HG. Many more potential cleanups in there, but
    this _only_ removes the pnp_resource_change code. Compile tested against
    current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
    offsets).
    Cc: Thomas Renninger

    Signed-off-by: Rene Herman
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Rene Herman
     

16 Oct, 2007

3 commits


20 Jul, 2007

2 commits


16 May, 2007

1 commit


11 May, 2007

5 commits


14 Feb, 2007

1 commit

  • Fix __devinit and __devexit issues with sound drivers.
    Resolves MODPOST warnings similar to:
    WARNING: sound/drivers/snd-dummy.o - Section mismatch: reference to .init.text:snd_dummy_probe from .data.rel.local between 'snd_dummy_driver' (at offset 0x0) and 'snd_dummy_controls'
    WARNING: sound/drivers/snd-mtpav.o - Section mismatch: reference to .init.text:snd_mtpav_probe from .data.rel.local between 'snd_mtpav_driver' (at offset 0x0) and 'snd_mtpav_input'
    WARNING: sound/drivers/snd-virmidi.o - Section mismatch: reference to .init.text:snd_virmidi_probe from .data.rel.local after 'snd_virmidi_driver' (at offset 0x0)

    Signed-off-by: Prarit Bhargava
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Prarit Bhargava
     

09 Feb, 2007

1 commit


20 Dec, 2006

1 commit

  • Fix IRQ flags for PCI devices.
    The shared IRQs for PCI devices shouldn't be allocated with
    IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't
    be used.
    The patch removes unnecessary cast in request_irq and free_irq,
    too.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

05 Oct, 2006

1 commit

  • Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

03 Jul, 2006

1 commit


28 Jun, 2006

1 commit


23 Jun, 2006

2 commits