Eric Lee / smarc-fsl-linux-kernel

09 Feb, 2009

1 commit

  • 0d87e656d   xfs: remove superflous inobt macros ... Browse Code »

    xfs_ialloc_btree.h has a a cuple of macros that only obsfucate the code
    but don't provide any abstraction benefits. This patches removes those
    and cleans up the reamaining defintions up a little.

    Signed-off-by: Christoph Hellwig
    Reviewed-by: Dave Chinner

    Christoph Hellwig
     

16 Jan, 2009

1 commit

30 Oct, 2008

11 commits

  • 7cc95a821   [XFS] Always use struct xfs_btree_block instead of short / longform ... Browse Code »

    structures.

    Always use the generic xfs_btree_block type instead of the short / long
    structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
    the length of a short / long form block. The rationale for this is that we
    will grow more btree block header variants to support CRCs and other RAS
    information, and always accessing them through the same datatype with
    unions for the short / long form pointers makes implementing this much
    easier.

    SGI-PV: 988146

    SGI-Modid: xfs-linux-melb:xfs-kern:32300a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Donald Douwsma
    Signed-off-by: David Chinner
    Signed-off-by: Lachlan McIlroy

    Christoph Hellwig
     
  • 136341b41   [XFS] cleanup btree record / key / ptr addressing macros. ... Browse Code »

    Replace the generic record / key / ptr addressing macros that use cpp
    token pasting with simpler macros that do the job for just one given btree
    type. The new macros lose the cur argument and thus can be used outside
    the core btree code, but also gain an xfs_mount * argument to allow for
    checking the CRC flag in the near future. Note that many of these macros
    aren't actually used in the kernel code, but only in userspace (mostly in
    xfs_repair).

    SGI-PV: 988146

    SGI-Modid: xfs-linux-melb:xfs-kern:32295a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Donald Douwsma
    Signed-off-by: David Chinner
    Signed-off-by: Lachlan McIlroy

    Christoph Hellwig
     
  • 60197e8df   [XFS] Cleanup maxrecs calculation. ... Browse Code »

    Clean up the way the maximum and minimum records for the btree blocks are
    calculated. For the alloc and inobt btrees all the values are
    pre-calculated in xfs_mount_common, and we switch the current loop around
    the ugly generic macros that use cpp token pasting to generate type names
    to two small helpers in normal C code. For the bmbt and bmdr trees these
    helpers also exist, but can be called during runtime, too. Here we also
    kill various macros dealing with them and inline the logic into the
    get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.

    Note that all these new helpers take an xfs_mount * argument which will be
    needed to determine the size of a btree block once we add support for
    extended btree blocks with CRCs and other RAS information.

    SGI-PV: 988146

    SGI-Modid: xfs-linux-melb:xfs-kern:32292a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Donald Douwsma
    Signed-off-by: Lachlan McIlroy

    Christoph Hellwig
     
  • 8cc938fe4   [XFS] implement generic xfs_btree_get_rec ... Browse Code »

    Not really much reason to make it generic given that it's so small, but
    this is the last non-method in xfs_alloc_btree.c and xfs_ialloc_btree.c,
    so it makes the whole btree implementation more structured.

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32206a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • 91cca5df9   [XFS] implement generic xfs_btree_delete/delrec ... Browse Code »

    Make the btree delete code generic. Based on a patch from David Chinner
    with lots of changes to follow the original btree implementations more
    closely. While this loses some of the generic helper routines for
    inserting/moving/removing records it also solves some of the one off bugs
    in the original code and makes it easier to verify.

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32205a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • 4b22a5718   [XFS] implement generic xfs_btree_insert/insrec ... Browse Code »

    Make the btree insert code generic. Based on a patch from David Chinner
    with lots of changes to follow the original btree implementations more
    closely. While this loses some of the generic helper routines for
    inserting/moving/removing records it also solves some of the one off bugs
    in the original code and makes it easier to verify.

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32202a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • 278d0ca14   [XFS] implement generic xfs_btree_update ... Browse Code »

    From: Dave Chinner

    The most complicated part here is the lastrec tracking for the alloc
    btree. Most logic is in the update_lastrec method which has to do some
    hopefully good enough dirty magic to maintain it.

    [hch: split out from bigger patch and a rework of the lastrec

    logic]

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32194a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • fe033cc84   [XFS] implement generic xfs_btree_lookup ... Browse Code »

    From: Dave Chinner

    [hch: split out from bigger patch and minor adaptions]

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32192a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • 8df4da4a0   [XFS] implement generic xfs_btree_decrement ... Browse Code »

    From: Dave Chinner

    [hch: split out from bigger patch and minor adaptions]

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32191a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • 637aa50f4   [XFS] implement generic xfs_btree_increment ... Browse Code »

    From: Dave Chinner

    Because this is the first major generic btree routine this patch includes
    some infrastrucure, first a few routines to deal with a btree block that
    can be either in short or long form, second xfs_btree_read_buf_block,
    which is the new central routine to read a btree block given a cursor, and
    third the new xfs_btree_ptr_addr routine to calculate the address for a
    given btree pointer record.

    [hch: split out from bigger patch and minor adaptions]

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32190a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     
  • 561f7d173   [XFS] split up xfs_btree_init_cursor ... Browse Code »

    xfs_btree_init_cursor contains close to little shared code for the
    different btrees and will get even more non-common code in the future.
    Split it up into one routine per btree type.

    Because xfs_btree_dup_cursor needs to call the init routine for a generic
    btree cursor add a new btree operation vector that contains a dup_cursor
    method that initializes a new cursor based on an existing one.

    The btree operations vector is based on an idea and code from Dave Chinner
    and will grow more entries later during this series.

    SGI-PV: 985583

    SGI-Modid: xfs-linux-melb:xfs-kern:32176a

    Signed-off-by: Christoph Hellwig
    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Bill O'Donnell
    Signed-off-by: David Chinner

    Christoph Hellwig
     

07 Feb, 2008

1 commit

  • 91906a882   [XFS] kill XFS_INOBT_IS_FREE_DISK ... Browse Code »

    This macro is unused an all other acros in this family operate on native
    types, so we most likely won't grow a user either.

    SGI-PV: 971186
    SGI-Modid: xfs-linux-melb:xfs-kern:29846a

    Signed-off-by: Lachlan McIlroy
    Signed-off-by: Tim Shimmin

    Christoph Hellwig
     

10 Feb, 2007

1 commit

  • 2c36ddeda   [XFS] Remove unused arguments from the XFS_BTREE_*_ADDR macros. ... Browse Code »

    It makes it incrementally clearer to read the code when the top of a macro
    spaghetti-pile only receives the 3 arguments it uses, rather than 2 extra
    ones which are not used. Also when you start pulling this thread out of
    the sweater (i.e. remove unused args from XFS_BTREE_*_ADDR), a couple
    other third arms etc fall off too. If they're not used in the macro, then
    they sometimes don't need to be passed to the function calling the macro
    either, etc....

    Patch provided by Eric Sandeen (sandeen@sandeen.net).

    SGI-PV: 960197
    SGI-Modid: xfs-linux-melb:xfs-kern:28037a

    Signed-off-by: Eric Sandeen
    Signed-off-by: David Chinner
    Signed-off-by: Tim Shimmin

    Eric Sandeen
     

28 Sep, 2006

1 commit

02 Nov, 2005

3 commits

21 Jun, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds