28 Apr, 2021
1 commit
16 Dec, 2020
1 commit
-
Fine tune the PHY parameters, let the PCIe link up to GEN3 between two
i.MX865 EVK boards in the i.MX EP RC validation system.Signed-off-by: Richard Zhu
Reviewed-by: Peter Chen
(cherry picked from commit 17db82300f80061a8568edf4585849add84cb6a6)
06 Dec, 2020
2 commits
-
enable asynchronous unlock even if define gcdENABLE_VG
Signed-off-by: Xianzhong
-
vg kernel does not suppport asynchronous event, uses sync unlock
Signed-off-by: Xianzhong
04 Dec, 2020
3 commits
-
GPU hardware access cannot be guaranteed to complete after unlock memory,
Need perform asynchronous unlock to avoid GPU access the freed MMU page.Signed-off-by: Xianzhong
(cherry picked from commit f902173b8ece1f6367c30557498077c569db31ff) -
The pixel clock of display controller lcdifv3 source from hdmi phy.
When hdmi cable plugout irq trigger,
hdmi phy will be poweroff immediately in hdmi controller driver.
But DRM and user app may still working until they received plugout event.
For such case, the kernel will dump.[ 89.707045] ------------[ cut here ]------------
[ 89.711705] [CRTC:39:crtc-2] vblank wait timed out
[ 89.716563] WARNING: CPU: 2 PID: 7 at drivers/gpu/drm/drm_atomic_helper.c:1467 drm_atomic_helper_wait_for_vblanks.part.0+0x274/0x290
[ 89.728472] Modules linked in:
[ 89.731533] CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.70-00041-g631cb8d6e2b2-dirty #23
[ 89.740055] Hardware name: NXP i.MX8MPlus EVK board (DT)
[Playing (No Repeated)][Vol=1.0][ 89.745372] Workqueue: events_unbound commit_work
[00:00:04/00:02:18][ 89.752939] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 89.759376] pc : drm_atomic_helper_wait_for_vblanks.part.0+0x274/0x290
[ 89.765905] lr : drm_atomic_helper_wait_for_vblanks.part.0+0x274/0x290
[ 89.772431] sp : ffff800011c43ca0
[ 89.775744] x29: ffff800011c43ca0 x28: 0000000000000000
[ 89.781054] x27: 000000000000055f x26: 0000000000000070
[ 89.786363] x25: ffff00017786b800 x24: 0000000000000001
[ 89.791674] x23: 0000000000000038 x22: 0000000000000004
[ 89.796983] x21: ffff00016a375400 x20: ffff00017786b088
[ 89.802293] x19: 0000000000000002 x18: 0000000000000010
[ 89.807604] x17: 0000000000000000 x16: 0000000000000000
[ 89.812913] x15: ffff0001760c5870 x14: ffffffffffffffff
[ 89.818225] x13: ffff800091c439f7 x12: ffff800011c439ff
[ 89.823537] x11: ffff800011a11000 x10: ffff800011b36328
[ 89.828847] x9 : 0000000000000000 x8 : ffff800011b37000
[ 89.834158] x7 : ffff80001069fc68 x6 : 0000000000000341
[ 89.839469] x5 : 0000000000000000 x4 : ffff00017f3a0188
[ 89.844778] x3 : ffff00017f3a6f20 x2 : ffff00017f3a0188
[ 89.850088] x1 : 4d8823010d259700 x0 : 0000000000000000
[ 89.855404] Call trace:
[ 89.857854] drm_atomic_helper_wait_for_vblanks.part.0+0x274/0x290
[ 89.864033] drm_atomic_helper_wait_for_vblanks+0x14/0x20
[ 89.869433] lcdifv3_drm_atomic_commit_tail+0x64/0x7c
[ 89.874484] commit_tail+0x9c/0x138
[ 89.877970] commit_work+0x10/0x18
[ 89.881372] process_one_work+0x198/0x320
[ 89.885382] worker_thread+0x48/0x420
[ 89.889042] kthread+0x138/0x158
[ 89.892272] ret_from_fork+0x10/0x1c
[ 89.895847] ---[ end trace ed53d661901a6437 ]---Keep hdmi phy in poweron status when cable plugout to workaround the issue.
HDMI phy power off function will be move to lcdifv3 or hdmi phy driver
later.Signed-off-by: Sandor Yu
Reviewed-by: Robby Cai -
According to board team signal measure result and update trim value as
For USB OTG1, setting 0x5b100010=0X10080802 (default 0X10080807).
For USB OTG2, setting 0x5b110010=0X10080803 (default 0X10080807).Signed-off-by: Frank Li
Acked-by: Peter Chen
03 Dec, 2020
2 commits
-
TRNG "sample size" (the total number of entropy samples that will be taken
during entropy generation) default / POR value is very conservatively
set to 2500.Let's set it to 512, the same as the caam driver in U-boot
(drivers/crypto/fsl_caam.c) does.This solves the issue of RNG performance dropping after a suspend/resume
cycle on parts where caam loses power, since the initial U-boot setttings
are lost and kernel does not restore them when resuming.Note: when changing the sample size, the self-test parameters need to be
updated accordingly.Signed-off-by: Horia Geantă
Reviewed-by: Iuliana Prodan -
Remove read of rtmctl register, which is not needed after
commit 8439e94fceb3 ("crypto: caam - fix sparse warnings").Fixes: 8439e94fceb3 ("crypto: caam - fix sparse warnings")
Signed-off-by: Horia Geantă
Reviewed-by: Iuliana Prodan
02 Dec, 2020
3 commits
-
The following stack trace is met when stress-testing suspend/resume:
[...]
PM: suspend devices took 1.972 seconds
[...]
SError Interrupt on CPU1, code 0xbf000002 -- SError
CPU: 1 PID: 213 Comm: hwrng Not tainted 5.4.70-2.3.0+g72209dedd129 #1
Hardware name: Freescale i.MX8DXL EVK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : _raw_spin_unlock_bh+0x0/0x28
lr : caam_jr_enqueue+0x24c/0x378
sp : ffff8000127dbd10
x29: ffff8000127dbd10 x28: ffff00003cac5940
x27: 00000000bcb5ef80 x26: 0000000000000010
x25: ffff800011c12000 x24: ffff8000127dbdb8
x23: ffff800010ca2298 x22: ffff00003c8aec10
x21: ffff00003cb5ef80 x20: 00000000ffffff8d
x19: 0000000000000010 x18: 000000000000000e
x17: 0000000000000001 x16: 0000000000000019
x15: 0000000000000033 x14: 000000000000004c
x13: 0000000000000068 x12: ffff800011188e90
x11: ffff00003c897210 x10: 0000000000000026
x9 : 00000000a4dcb313 x8 : 0000000000000000
x7 : 0000000000000001 x6 : ffff800011b59000
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000004 x2 : 0000000000000014
x1 : 00000000000001ec x0 : ffff00003cac5940
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 1 PID: 213 Comm: hwrng Not tainted 5.4.70-2.3.0+g72209dedd129 #1
Hardware name: Freescale i.MX8DXL EVK (DT)
Call trace:
dump_backtrace+0x0/0x140
show_stack+0x14/0x20
dump_stack+0xb4/0x114
panic+0x158/0x324
nmi_panic+0x84/0x88
arm64_serror_panic+0x74/0x80
do_serror+0x80/0x138
el1_error+0x84/0xf8
_raw_spin_unlock_bh+0x0/0x28
caam_rng_read_one.isra.0+0x1c8/0x3a0
caam_read+0x80/0xa8
hwrng_fillfn+0x8c/0x140
kthread+0x138/0x158
ret_from_fork+0x10/0x1c
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: noneThis happens when:
-the generic "hwrng" kthread tries to draw entropy and
-the current rng is caam's rng and
-the job ring used for caam rng hasn't been resumed yet
(after a suspend)The issue has been noticed also in upstream (for TPM device in ChromeOS)
and the fix proposed involved making the "hwrng" kthread freezable:
03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend")
ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()")
59b569480dc8 ("random: Use wait_event_freezable() in add_hwgenerator_randomness()")However, because these commits introduced a regression in virtio-rng
(Link: https://lore.kernel.org/lkml/4a45b3e0-ed3a-61d3-bfc6-957c7ba631bb@maciej.szmigiero.name)
they were later reverted in commit
08e97aec700a ("Revert "hwrng: core - Freeze khwrng thread during suspend"")Since there was no progress in upstream and fixing virtio-rng regression
is not trivial, the solution chosen is to unregister / re-register
caam rng driver from hwrng during suspend / resume.Signed-off-by: Horia Geantă
Tested-by: Iuliana Prodan -
The global driver_data.jr_list contains the list of active job rings
at a given moment.Picking a JR is done using caam_jr_alloc(), which goes through this list
and chooses the JR with the least number of users ("tfm_count").During the JR suspend/resume, this list must be updated to reflect that
the JR is no longer available - otherwise caam_jr_alloc() could return
a JR that has been suspended.While this is rather a theoretical issue (i.e. was not met in practice),
it is a prerequisite for fixing the RNG failure met during suspend/resume.Signed-off-by: Horia Geantă
Tested-by: Iuliana Prodan -
With MCU SDK 2.9, there are two copy resource tables published to Linux,
the 1st is vdev0vring0, the 2nd is in rsc-table address.The 1st is for legacy compatible usage, it will be removed in future
releases. we will only use 2nd new address in future releases.But at current stage, we still use the 1st one in linux, but we
also need to reserve area for the 2nd one, otherwise when using
linux to kick Mcore, Mcore might overwrite the data used by Linux.The 2nd table address is as below:
8QXP/DX/DXL: [0x90000000 + 1M – 4KB, 0x90000000 + 1M)
8QM: CM40: [0x90000000 + 1M – 4KB, 0x90000000 + 1M)
CM41: [0x90100000 + 1M – 4KB, 0x90100000 + 1M)
8MQ/MM/MN-evk: [0xb8000000 + 1M – 4KB, 0xb8000000 + 1M)
8MP-evk: [0x55000000 + 1M – 4KB, 0x55000000 + 1M)Currently only 8DXL and 8MP use MCU SDK 2.9 and others still use MCU
SDK 2.8, but for prepare future update, we update all SoC to reserve
the 2nd table address.Reviewed-by: Ye Li
Reviewed-by: Richard Zhu
Signed-off-by: Peng Fan
01 Dec, 2020
1 commit
-
This is just a workaround for Linux 5.4 Q4 release
to avoid Linux use the memory.
This board only has 1GB memory, the 0xb8000000
exceeds the DRAM, and round back to 0x78000000,
since we not modify Mcore image, so we need to avoid
Linux touch 0x78000000 which might crash the system
and mark mcore ddr demo broken and only support booting mcore image
from U-Boot bootaux.Reviewed-by: Shengjiu Wang
Signed-off-by: Peng Fan
27 Nov, 2020
3 commits
-
subdev_notifier_complete will be called multi times in some cases
due to workaround to support hotplugin-like mechanism, so add checking
media device register status before register new media device.Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai -
Remove RGBA format extended before in V4L2 format list due to V4L2
framework support it now.Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai -
There is no RGBA format in V4L2 framework when develop ISI mem2mem
driver, so we add V4L2_PIX_FMT_RGBA in V4L2 framework. But in the
latest kernel version, V4L2 framework add V4L2_PIX_FMT_RGBA32 for
RGBA format, so change use RGBA format define in latest framework.Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai
21 Nov, 2020
4 commits
-
Remove 4K feature for ISI channel1 due to ISI line buffer limitation
Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai -
Remove "fsl,chain_buf" property parse because it's no longer used.
Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai -
Add workaround for iMX865 ISI to support 4K because for the ISI line
buffer management, the other chips used a single clock for all the
memories, where as in iMX865, each channel has the corresponding clock
which is used, so need to enable channel1 clock when channel0 chain
buffer enabled.Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai -
When ISI output width more than 2048, it need to use adjacent channel
chain buffer to receive more data. For iMX865, clock for each channel
is independent, so need to enable the adjacent channel clock when the
channel0 chain buffer enabled. This is a workaround for IC issue.Signed-off-by: Guoniu.zhou
Reviewed-by: Robby Cai
20 Nov, 2020
13 commits
-
Adjust the LDO trim value based upon the fuse trim value.
Signed-off-by: Oliver Brown
Reviewed-by: Laurentiu Palcu -
The blk-ctl register allow access to set the MIPI DSI LDO trim value.
Signed-off-by: Oliver Brown
Reviewed-by: Laurentiu Palcu -
Add support for reading fuse to get iMX8mp LDO trim.
Signed-off-by: Oliver Brown
Reviewed-by: Laurentiu Palcu -
Enable ADC monomix for fixing only one channel in recording
Signed-off-by: Shengjiu Wang
-
Enable support for Hifiberry dacplus audio hats on
iMX8MMini EVK.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit ec6d8970ba79fc7cef371eea888d24e5bd347f2a) -
Enable support for IQauidio dacpro audio hats on
iMX8MMini EVK.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit f4122d1b5c3e66c3fe731ea19e6e6e17c2000af6) -
Enable support for IQauidio dacplus audio hats on
iMX8MMini EVK.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit 95b3f81802fe52fbe66ce6fbb28ae43f78d85f04) -
Enable support for Hifiberry dacplus audio hats on
iMX8MNano EVK.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit c0bee3e1d91937b49e22e635f2bca53e8b25f57c) -
Enable support for IQauidio dacpro audio hats on
iMX8MNano EVK.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit 9ebf35bcd2ce93b3595dee2b3a3f662b70f10088) -
Enable support for IQauidio dacplus audio hats on
iMX8MNano EVK.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit 0fe19d3f2e949c65ffa636d4971b9f5f463497fd) -
Add set_sysclk function to select preferred master input
clock on pcm512x codec, support multiple input system clocks
on SCLK master mode.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit 5ca64840578f9dad359d5c2e6821805df68a1608) -
Enable imx-pcm512x sound driver as built-in module
for iMX8M EVK supportSigned-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit 84db7260f5a350f6e3d5418e7a90e8b352aaa183) -
ASoC machine sound driver for IQAudio PiDAC plus/pro
Rev3 for iMX SoC, high resolution codec supporting
upto 384khz sample rate on SAI; Include support for
Hifiberry audio hats that uses external oscillators for
dac system clock.Signed-off-by: Adrian Alonso
Reviewed-by: Shengjiu Wang
(cherry picked from commit b52d3587cba2b3db60cf316430478969918fed7a)
19 Nov, 2020
7 commits
-
firmware
move timestamp to firmware, it will make our driver more easy to
upstreamSigned-off-by: Ming Qian
-
firmware
move timestamp to firmware, it will make our driver more easy to
upstreamSigned-off-by: Ming Qian
-
We hit the problem with below sequence:
- ci_udc_vbus_session() update vbus_active flag and ci->driver
is valid,
- before calling the ci_hdrc_gadget_connect(),
usb_gadget_udc_stop() is called by application remove gadget
driver,
- ci_udc_vbus_session() will contine do ci_hdrc_gadget_connect() as
gadget_ready is 1, so udc interrupt is enabled, but ci->driver is
NULL.
- USB connection irq generated but ci->driver is NULL.As udc irq only should be enabled when gadget driver is binded, so
add spinlock to protect the usb irq enable for vbus session handling.Signed-off-by: Jun Li
Signed-off-by: Peter Chen
(cherry picked from commit 72dc8df7920fc24eba0f586c56e900a1643ff2b3)
(cherry picked from commit 0fe900249814f73ecb79c6fb2ae75d46ed9d3a3e) -
The 'lcdif_crtc' allocated by devm_kzalloc() in bind() will
be freed automatically during unbind() stage if any other
component bind failed and this will cause use-after-free
issue in drm_mode_config_cleanup().Kasan reports below error related with this issue:
[ 2.188122] ==================================================================
[ 2.195370] BUG: KASAN: use-after-free in drm_mode_config_cleanup+0x274/0x478
[ 2.202524] Read of size 8 at addr ffff000069c1e098 by task swapper/0/1
[ 2.209145]
[ 2.210659] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.70-00056-g8e43cd16c8bb-dirty #139
[ 2.219020] Hardware name: FSL i.MX8MM EVK board (DT)
[ 2.224080] Call trace:
[ 2.226546] dump_backtrace+0x0/0x1e8
[ 2.230220] show_stack+0x14/0x20
[ 2.233554] dump_stack+0xe0/0x14c
[ 2.236981] print_address_description.isra.0+0x68/0x34c
[ 2.242311] __kasan_report+0x118/0x220
[ 2.246165] kasan_report+0xc/0x18
[ 2.249587] __asan_load8+0x94/0xb8
[ 2.253090] drm_mode_config_cleanup+0x274/0x478
[ 2.257728] imx_drm_bind+0xd8/0x1b0
[ 2.261324] try_to_bring_up_master+0x24c/0x2c8
[ 2.265870] __component_add+0x110/0x258
[ 2.269812] component_add+0x10/0x18
[ 2.273407] imx_sec_dsim_probe+0x74/0xa0
[ 2.277438] platform_drv_probe+0x6c/0xc8
[ 2.281462] really_probe+0x148/0x440
[ 2.285140] driver_probe_device+0x74/0x130
[ 2.289340] device_driver_attach+0x94/0xa0
[ 2.293537] __driver_attach+0x70/0x110
[ 2.297390] bus_for_each_dev+0xe4/0x158
[ 2.301329] driver_attach+0x30/0x40
[ 2.304918] bus_add_driver+0x21c/0x2b8
[ 2.308771] driver_register+0xbc/0x1d0
[ 2.312627] __platform_driver_register+0x7c/0x88
[ 2.317350] imx_sec_dsim_driver_init+0x18/0x20
[ 2.321897] do_one_initcall+0xa4/0x24c
[ 2.325751] kernel_init_freeable+0x238/0x2e8
[ 2.330128] kernel_init+0x10/0x114
[ 2.333635] ret_from_fork+0x10/0x1c
[ 2.337215]
[ 2.338717] Allocated by task 1:
[ 2.341963] save_stack+0x24/0xb0
[ 2.345296] __kasan_kmalloc.isra.0+0xc0/0xe0
[ 2.349671] kasan_slab_alloc+0x14/0x20
[ 2.353525] __kmalloc_node_track_caller+0x118/0x2c8
[ 2.358512] devm_kmalloc+0x48/0xc8
[ 2.362016] lcdif_crtc_bind+0x38/0x278
[ 2.365868] component_bind_all+0x1c0/0x3c8
[ 2.370070] imx_drm_bind+0x104/0x1b0
[ 2.373750] try_to_bring_up_master+0x24c/0x2c8
[ 2.378298] __component_add+0x110/0x258
[ 2.382235] component_add+0x10/0x18
[ 2.385827] imx_sec_dsim_probe+0x74/0xa0
[ 2.389854] platform_drv_probe+0x6c/0xc8
[ 2.393877] really_probe+0x148/0x440
[ 2.397555] driver_probe_device+0x74/0x130
[ 2.401757] device_driver_attach+0x94/0xa0
[ 2.405954] __driver_attach+0x70/0x110
[ 2.409803] bus_for_each_dev+0xe4/0x158
[ 2.413740] driver_attach+0x30/0x40
[ 2.417330] bus_add_driver+0x21c/0x2b8
[ 2.421180] driver_register+0xbc/0x1d0
[ 2.425035] __platform_driver_register+0x7c/0x88
[ 2.429754] imx_sec_dsim_driver_init+0x18/0x20
[ 2.434300] do_one_initcall+0xa4/0x24c
[ 2.438150] kernel_init_freeable+0x238/0x2e8
[ 2.442526] kernel_init+0x10/0x114
[ 2.446031] ret_from_fork+0x10/0x1c
[ 2.449612]
[ 2.451112] Freed by task 1:
[ 2.454010] save_stack+0x24/0xb0
[ 2.457343] __kasan_slab_free+0x108/0x180
[ 2.461456] kasan_slab_free+0x10/0x18
[ 2.465219] kfree+0x80/0x298
[ 2.468207] release_nodes+0x358/0x3e8
[ 2.471975] devres_release_group+0xd0/0x140
[ 2.476261] component_unbind.isra.0+0x98/0xb8
[ 2.480724] component_bind_all+0x25c/0x3c8
[ 2.484924] imx_drm_bind+0x104/0x1b0
[ 2.488605] try_to_bring_up_master+0x24c/0x2c8
[ 2.493153] __component_add+0x110/0x258
[ 2.497090] component_add+0x10/0x18
[ 2.500682] imx_sec_dsim_probe+0x74/0xa0
[ 2.504707] platform_drv_probe+0x6c/0xc8
[ 2.508732] really_probe+0x148/0x440
[ 2.512411] driver_probe_device+0x74/0x130
[ 2.516610] device_driver_attach+0x94/0xa0
[ 2.520807] __driver_attach+0x70/0x110
[ 2.524657] bus_for_each_dev+0xe4/0x158
[ 2.528594] driver_attach+0x30/0x40
[ 2.532183] bus_add_driver+0x21c/0x2b8
[ 2.536036] driver_register+0xbc/0x1d0
[ 2.539889] __platform_driver_register+0x7c/0x88
[ 2.544608] imx_sec_dsim_driver_init+0x18/0x20
[ 2.549152] do_one_initcall+0xa4/0x24c
[ 2.553006] kernel_init_freeable+0x238/0x2e8
[ 2.557380] kernel_init+0x10/0x114
[ 2.560884] ret_from_fork+0x10/0x1c
[ 2.564464]
[ 2.565972] The buggy address belongs to the object at ffff000069c1e000
[ 2.565972] which belongs to the cache kmalloc-2k of size 2048
[ 2.578510] The buggy address is located 152 bytes inside of
[ 2.578510] 2048-byte region [ffff000069c1e000, ffff000069c1e800)
[ 2.590343] The buggy address belongs to the page:
[ 2.595154] page:fffffe0001870600 refcount:1 mapcount:0 mapping:ffff000068003400 index:0x0 compound_mapcount: 0
[ 2.605260] flags: 0xffff00000010200(slab|head)
[ 2.609820] raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff000068003400
[ 2.617583] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000
[ 2.625339] page dumped because: kasan: bad access detected
[ 2.630917]
[ 2.632417] Memory state around the buggy address:
[ 2.637225] ffff000069c1df80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2.644463] ffff000069c1e000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2.651700] >ffff000069c1e080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2.658931] ^
[ 2.662954] ffff000069c1e100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2.670193] ffff000069c1e180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2.677421] ==================================================================Signed-off-by: Fancy Fang
Reported-by: Bo Zhang
(cherry picked from commit 6c91a51df9425a93157409546feca7107baaf4dd) -
Due to commit b3a420c9cf3f (MLK-24998-4 drm/bridge: sec-dsim:
use 12MHz for default PHY REF clock), the dsi PHY reference
clock source need to be assigned to osc_24m clock.Signed-off-by: Fancy Fang
Reviewed-by: Jacky Bai
(cherry picked from commit 8e43cd16c8bbfe5b7e3c0fc1e7c3ddf738d8db01) -
Due to commit b3a420c9cf3f (MLK-24998-4 drm/bridge: sec-dsim:
use 12MHz for default PHY REF clock), the dsi PHY reference
clock source need to be assigned to osc_24m clock.Signed-off-by: Fancy Fang
Reviewed-by: Jacky Bai
(cherry picked from commit 2972241b831ed65f641ccdb80b504cadef0ba591) -
Add mode_valid() implementation for CRTC to filter out any
mode which cannot be supported by LCDIFv3. Only check the
CEA and DMT modes for pixel clock round rate is same with
the value from mode.Signed-off-by: Fancy Fang
Reviewed-by: Liu Ying
(cherry picked from commit f252a44da9f90951614c0bf513df6bd4d145e76e)