22 Oct, 2008
31 commits
-
De-alloc frontends on fault condition.
Signed-off-by: Darron Broad
Signed-off-by: Mauro Carvalho Chehab -
This creates a self contained frontend de-allocator
for the instances where an adapter has not been
registered yet frontend de-allocation may
be required.Signed-off-by: Darron Broad
Signed-off-by: Mauro Carvalho Chehab -
Add debug output for dvb_remove enter.
Signed-off-by: Darron Broad
Signed-off-by: Mauro Carvalho Chehab -
The multifrontend changes on cx88 assumed that all boards that use cx88-mpeg
supports DVB. This is not true. There also a few analog-only boards based on
Blackboard design that also uses cx88-mpeg. For those boards, there's no need
to allocate dvb frontends.This patch fixes videobuf allocation for those devices.
Signed-off-by: Mauro Carvalho Chehab
-
Initial fix for when analogue only is selected
for compilation (ie, !CX88_DVB)Signed-off-by: Darron Broad
Signed-off-by: Mauro Carvalho Chehab -
inode is never used on video_ioctl2. Remove it and rename the function to
__video_ioctl2. This allows its usage directly as a callback at
fops.unlocked_ioctl.Since we still need a callback with inode to be used with fops.ioctl,
this patch adds video_ioctl2() that is just a call to __video_ioctl2().Also, this patch adds some comments about video_ioctl2 and __video_ioctl2
usage at v4l2-ioctl.h.Signed-off-by: Mauro Carvalho Chehab
-
The inode parameter at v4l_compat_translate_ioctl() were just passed over several
places just to keep compatible with fops.ioctl. However, it weren't used anywere.This patch gets hid of this unused parameter.
Cc: Laurent Pinchart
Cc: Mike Isely
Signed-off-by: Mauro Carvalho Chehab -
When using FBIOBLANK, FB_BLANK_POWERDOWN will now switch off the video output.
Since some televisions turn themselves off after a while with no signal, this
is the closest we can get to power-saving.Signed-off-by: Ian Armstrong
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now
independent of the minor number. So instead of using the minor field
of the video_device struct one has to use the num field: this always
contains the kernel number of the device node.I forgot about this when I did the v4l2 core change, so this patch
converts all drivers that use it in one go. Luckily the change is
trivial.Cc: michael@mihu.de
Cc: mchehab@infradead.org
Cc: corbet@lwn.net
Cc: luca.risolia@studio.unibo.it
Cc: isely@pobox.com
Cc: pe1rxq@amsat.org
Cc: royale@zerezo.com
Cc: mkrufky@linuxtv.org
Cc: stoth@linuxtv.org
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
When loading ivtv the TV-out of the PVR-350 will flash green since the
saa712x is activated before the MPEG decoder has been initialized.Deactivate the saa712x until the MPEG decoder has been initialized.
Signed-off-by: Martin Dauskardt
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Based on an older patch from Sakari Ailus.
Cc: Sakari Ailus
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Export v4l2_int_device_try_attach_all. This allows initiating the
initialisation of int if device after the drivers have been registered.Also allow drivers to call ioctls if v4l2-int-if was compiled as
module.Signed-off-by: Sakari Ailus
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this
brings idle power from 123ma down to 84ma).Signed-off-by: Devin Heitmueller
Acked-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
If we are already at the desired modulation, there is no need to reconfigure
the demod (at a tuning time cost)Note that this change revealed that although the datasheet says the demod
starts out in VSB-8 mode, the first tuning was failing consistently unless
we went through the work of setting the registers. So add a field to denote
this case so we always do the enable_frontend call, even if the first tuning
request is for VSB-8.Signed-off-by: Devin Heitmueller
Reviewed-by: Michael Krufky
Acked-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
If you instruct the tuner to change frequencies, it can take up to 2500ms to
get a demod lock. By performing a soft reset after the tuning call (which
is consistent with how the Pinnacle 801e Windows driver behaves), you get
a demod lock inside of 300msSigned-off-by: Devin Heitmueller
Reviewed-by: Michael Krufky
Acked-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
s5h1411: Add the #define for an existing supporting I/F
Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
s5h1411: Remove meaningless code
Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Adding a serialmode function to read/and/or/write the register for safety.
Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
This includes new bit definitions for previously unknown bits.
Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
This should improve performance.
Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
s5h1411: Improvements to the default registers
Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Add checking for frequency and printk if -1 returned.
Signed-off-by: Alexey Klimov
Signed-off-by: Douglas Schilling Landgraf
Signed-off-by: Mauro Carvalho Chehab -
Added BKL for usb_amradio_open()
Signed-off-by: Alexey Klimov
Signed-off-by: Douglas Schilling Landgraf
Signed-off-by: Mauro Carvalho Chehab -
Fixed few coding style issues in dsbr100
Signed-off-by: Alexey Klimov
Signed-off-by: Douglas Schilling Landgraf
Signed-off-by: Mauro Carvalho Chehab -
Replaced bus_info string from ISA to USB
Signed-off-by: Alexey Klimov
Signed-off-by: Douglas Schilling Landgraf
Signed-off-by: Mauro Carvalho Chehab -
(Mike Isely) This change was empirically figured out by Boris Dores
after empirically comparing against behavior in the Windows driver.Signed-off-by: Mike Isely
Signed-off-by: Mauro Carvalho Chehab -
Fix deadlock problem in 2.6.27 caused by new USB core behavior in
response to a USB device reset request. With older kernels, the USB
device reset was "in line"; the reset simply took place and the driver
retained its association with the hardware. However now this reset
triggers a disconnect, and worse still the disconnect callback happens
in the context of the caller who asked for the device reset. This
results in an attempt by the pvrusb2 driver to recursively take a
mutex it already has, which deadlocks the driver's worker thread.
(Even if the disconnect callback were to happen on a different thread
we'd still have problems however - because while the driver should
survive and correctly disconnect / reconnect, it will then trigger
another device reset during the repeated initialization, which will
then cause another disconect, etc, forever.) The fix here is simply
to not attempt the device reset (it was of marginal value anyway).Signed-off-by: Mike Isely
Signed-off-by: Mauro Carvalho Chehab -
Changes to let error return codes bubble up to the user visible
error message on card initialization. A number of them were being remapped to
ENOMEM when no memory or array resource shortage existed. That hampered
diagnosis of user trouble reports.Signed-off-by: Andy Walls
Signed-off-by: Mauro Carvalho Chehab -
cx18: Add __iomem address space qualifier to cx18_log_*_retries() addr
argument to clean up sparse build warnings.Signed-off-by: Andy Walls
Signed-off-by: Mauro Carvalho Chehab -
On error exit, the cx18_probe() function did not use the proper entry in
cx18_cards[] with kfree() when card init failed; leaking memory.Signed-off-by: Andy Walls
Signed-off-by: Mauro Carvalho Chehab
20 Oct, 2008
1 commit
-
A consolidated implementation will provide this generically through
asm/byteorder, remove direct includes to avoid breakage when the
changeover to the new implementation occurs.Signed-off-by: Harvey Harrison
Acked-by: Mauro Carvalho Chehab
Acked-by: "Paul E. McKenney"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
18 Oct, 2008
8 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (94 commits)
USB: remove err() macro from more usb drivers
USB: remove err() macro from usb misc drivers
USB: remove err() macro from usb core code
USB: remove err() macro from usb class drivers
USB: remove use of err() in drivers/usb/serial
USB: remove info() macro from usb mtd drivers
USB: remove info() macro from usb input drivers
USB: remove info() macro from usb network drivers
USB: remove info() macro from remaining usb drivers
USB: remove info() macro from usb/misc drivers
USB: remove info() macro from usb/serial drivers
USB: remove warn macro from HID core
USB: remove warn() macro from usb drivers
USB: remove warn() macro from usb net drivers
USB: remove warn() macro from usb media drivers
USB: remove warn() macro from usb input drivers
usb/fsl_qe_udc: clear data toggle on clear halt request
usb/fsl_qe_udc: fix response to get status request
fsl_usb2_udc: Fix oops on probe failure.
fsl_usb2_udc: Add a wmb before priming endpoint.
... -
USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible. In the
few places that will not work out, use a basic printk().Cc: Mauro Carvalho Chehab
Signed-off-by: Greg Kroah-Hartman -
Remove warning message during cx88-dvb compilation.
Also fixes double underline in function and struct names.Signed-off-by: Igor M. Liplianin
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Leandro Costantino
Signed-off-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab
