19 Apr, 2008
12 commits
-
Add support for the migor_ts touch panel to the MigoR board.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Add support for the rs5c372b RTC chip to MigoR.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Enable the sh7722 I2C controller on the MigoR board.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Add NAND flash support to the MigoR board by giving board specific data
to the gen_nand platform driver.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Add NOR flash support to the MigoR board by giving board specific data
to the physmap-flash platform driver.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Signed-off-by: Paul Mundt
-
Use physical addresses and change resource name of MigoR ethernet chip.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds a MigoR specific header file. We may want to use a cpu
specific header file instead, but this will do for now.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Add support for Solution Engine SH7721 board(MS7721RP01).
Signed-off-by: Yoshihiro Shimoda
Signed-off-by: Paul Mundt -
Signed-off-by: Masayuki Hosokawa
Signed-off-by: Paul Mundt -
Add KEYSC platform data for the Solution Engine 7722 board.
Signed-off-by: Magnus Damm
Cc: Dmitry Torokhov
Signed-off-by: Andrew Morton
Signed-off-by: Paul Mundt -
Add KEYSC platform data for the sh7722 MigoR board.
Signed-off-by: Magnus Damm
Cc: Dmitry Torokhov
Signed-off-by: Andrew Morton
Signed-off-by: Paul Mundt
06 Mar, 2008
4 commits
-
The only board-specific bits that existed here were for setting up the
IRQs, which are now handled by the SH7710 CPU support code instead. As
there's nothing else to do for setup, kill off the board support code
and have the defconfig use the generic machvec instead.Signed-off-by: Paul Mundt
-
Signed-off-by: Paul Mundt
-
This patch fixes the old non-verbose hp6xx apm code and enables some
very basic apm output. We now get percentage (battery) output
and basic time estimate.Signed-off-by: Kristoffer Ericson
Signed-off-by: Paul Mundt -
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison
Signed-off-by: Andrew Morton
Signed-off-by: Paul Mundt
14 Feb, 2008
4 commits
-
Reported-by: Robert P. J. Day
Signed-off-by: Paul Mundt -
This patch converts the highlander CF device from good old machvec readb/writeb
to the new shiny trapped io.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch converts the CF device on r2d boards from machvec readb/writeb
to trapped io.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds basic support for the Migo-R board.
Only simple stuff provided by the cpu specific sh7722 code is in place now,
like serial console port, timers and usb gadget. There is also partial support
for the smc91c111 ethernet controller - unfortunately some driver header file
also needs patching (not included here) to make the driver get IRQ sense
information from the platform data.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
06 Feb, 2008
1 commit
-
Signed-off-by: Jeff Garzik
28 Jan, 2008
15 commits
-
This patch adds the header file asm/spi.h and board specific code for the
r2d board. The header file contains a structure that should be used to
point out a single spi bus. The board specific code for r2d is updated with
such a structure for the new spi_sh_sci driver. The structure contains a
chip select callback plus information about the R9701 rtc chip which is
attached to the spi bus.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch updates the board specific irq code for r7780rp. The new code is
very similar to the other highlander implementations, with the exception that
the r7780rp handles pci interrupts using IRL. To simplify the pci code and
use the same interrupt numbers as r7780mp and r7785rp we hook in to the
cpu specific pci vectors.The pci interrupts and the push switch all work well with and without this
patch. CF and AX88796 are not ok though and the source of the problem is
unknown at this point. The AX88796 does for not detect it's proper mac
address (IPL gets it right) and the kernel hangs on CF access. As a workaround
this patch removes the CF and the AX88796 from the platform datain case of
r7780rp.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch makes the dreamcast use the recently added declared coherent
memory functions to point out the memory window suitable for dma.Apart from cleaning up, this gives the dreamcast a proper memory allocator
for pci dma memory.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Add support for Renesas Technology Europe SDK7780 board.
Signed-off-by: Nicholas Beck
Signed-off-by: Paul Mundt -
Signed-off-by: Jan Engelhardt
Signed-off-by: Paul Mundt -
Signed-off-by: Paul Mundt
-
Signed-off-by: Paul Mundt
-
Signed-off-by: Paul Mundt
-
This patch tells the sm501 mfd driver to build platform data for the
sm501 usb host driver.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch removes redundant irq handling code together with unused
consistent alloc code. R2D uart setup code is changed to use
sm501-regs.h and unused header files are removed.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds timings to drive a Sharp LQ104V1DG21 lcd panel that can
be hooked up to R2D-1 or R2D-PLUS. The sm501fb driver should leave the
pins FPEN and VBIASEN alone, and this patch instructs the driver to do
so by not setting flags flags for these pins.This patch works best together with the patch posted to the
linux-fbdev-devel list "sm501fb: control panel pin usage with platform
data flags", but this patch can be merged independently.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch removes interrupt priority tables from the intc code.
Optimal priority assignment varies with embedded application anyway,
so keeping the interrupt priority tables together with cpu-specific
code doesn't make sense.The function intc_set_priority() should be used instead to set the
desired interrupt priority level.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Signed-off-by: Joe Perches
Signed-off-by: Paul Mundt -
Signed-off-by: Paul Mundt
-
Signed-off-by: Paul Mundt
23 Nov, 2007
1 commit
-
This patch fixes CF support for R2D-1 boards. Both R2D-1 and
R2D-PLUS are equipped with CF IRQs, but the R2D-1 FPGA version
seem to deliver IRQ spikes with certain CF cards during libata
probing. This patch enables polling for R2D-1 as a workaround
for this broken FGPA logic.R2D-1 CF support was recently introduced by commit:
43f4b8c7578b928892b6f01d374346ae14e5eb70.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
08 Nov, 2007
1 commit
-
This will force the snapgear boards to use the on-chip SH RTC instead,
until the rtc-ds1302 driver is merged. The current code is broken
and hasn't built in some time, so just kill it off and get the board
working again.Signed-off-by: Paul Mundt
07 Nov, 2007
2 commits
-
Access size to LED is not added on Solution Engine series.
LED doesn't work. Fixed this problem.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Paul Mundt -
This is dead code, and doesn't build anyways. Kill it off.
Signed-off-by: Paul Mundt
