24 Apr, 2008
30 commits
-
Also change some if (x == NULL) to if (!x).
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Add some debug messages for suspend/resume and to add a clear prefix to
s3c24xx-i2s and s3c24xx-pcm.Signed-off-by: Tim Niemeyer
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Tim Niemeyer
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
The PXA3xx does not support the use of interrupts during reset and access
to the GPIO status requires similar handling to that for PXA27x.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
cs4270_hw_params does several times:
ret = snd_soc_write()
if (ret < 0)
...This only works when ret is signed.
Signed-off-by: Roel Kluin
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Leave the power bit for the touch screen alone when suspending the WM9713
so that the touch screen driver can handle it. This allows the touch
screen to be used as a wakeup source when the system is suspended.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable sound
platform drivers, to re-enable auto loading.[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers
Signed-off-by: David Brownell
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai -
When logging register changes in DAPM debug output include the register
number.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
With commit 9004acc70e8c49c50c4c7b652f906f1e0ed5709d, include/sound/driver.h
is deprecated. This patch removes the #include from fsl_ssi.c and fsl_dma.c.Signed-off-by: Timur Tabi
Signed-off-by: Takashi Iwai -
Signed-off-by: Robert Jarzmik
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison
Signed-off-by: Takashi Iwai -
GTA02 device has a speaker between LOUT2 & ROUT2 and in this mode ROUT2
needs to be inverted. This patch adds a mixer control for this.Signed-off-by: Graeme Gregory
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Jarkko Nikula
Signed-off-by: Takashi Iwai -
Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board.
It includes:
- ASoC Davinci DMA driver
- ASoC Davinci I2S (Davinci McBSP module based) driver
- ASoC Davinci-EVM reference boardSigned-off-by: Vladimir Barinov
Signed-off-by: Takashi Iwai -
This patch adds an ASoC driver for the WM9713 AC97 codec.
Signed-off-by: Liam Girdwood
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Currently you will see an empty "SoC Audio support for SuperH" menu
when building for other archs (example pxa).
This patch adds "depends on SUPERH" to remove that empty menu.Signed-off-by: Kristoffer Ericson
Signed-off-by: Takashi Iwai -
Voice playback volume is in register bits 0:2, not 4:6.
From: Mike Montour
Signed-off-by: Mark Brown
Cc: Werner Almesberger
Signed-off-by: Takashi Iwai
20 Apr, 2008
1 commit
-
…'orion', 'pxa', 'sa1100', 's3c' and 'sparsemem' into devel
19 Apr, 2008
3 commits
-
Add missing clk_enable()
Signed-off-by: Mark Brown
Acked-by: eric miao
Signed-off-by: Russell King -
two reasons:
1. GPIO namings and their mode definitions are conceptually not part
of the PXA register definitions2. this is actually a temporary move in the transition of PXA2xx to
use MFP-alike APIs (as what PXA3xx is now doing), so that legacy
code will still work and new code can be added in step by stepSigned-off-by: eric miao
Signed-off-by: Russell King -
Signed-off-by: Mark Brown
Acked-by: Takashi Iwai
Acked-by: eric miao
Signed-off-by: Russell King
10 Apr, 2008
1 commit
-
The SoC audio driver for the Endrelia ETI_B1 board should not access
the PIO controller directly, but must rather use the AT91 GPIO
interface.(This is updated version of patch with removed trailing whitespace)
Signed-off-by: Andrew Victor
Signed-off-by: Russell King
24 Mar, 2008
1 commit
-
Please stop using random I2C driver IDs.
Also removed a pointless initialization to 0 of a static struct member.
Acked-by: Takashi Iwai
Cc: Jarkko Nikula
Signed-off-by: Jean Delvare
29 Feb, 2008
3 commits
-
Add kcontrol argument to function since the API was changed by the commit
9af6d9562414568ecadf96aaef5b88e7e8b19821.Signed-off-by: Jarkko Nikula
Signed-off-by: Takashi Iwai -
Add kcontrol argument to functions since the API was changed by the commit
9af6d9562414568ecadf96aaef5b88e7e8b19821.Signed-off-by: Jarkko Nikula
Signed-off-by: Takashi Iwai -
Signed-off-by: Jarkko Nikula
Signed-off-by: Takashi Iwai
23 Feb, 2008
1 commit
-
In linus' git tree I found this problem. Is it also in the alsa tree?
please confirm it's the right fix. The patch was not yet tested.Signed-off-by: Roel Kluin
Acked-by: Timur Tabi
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai
Signed-off-by: Linus Torvalds