16 Jan, 2006
6 commits
-
- Tuner_params->tda988x is unused right now, so let's disable it for 2.6.16
- This is currently happening at the card level, but the plan
is to move this configuration into the tuner_params configuration.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- clean up some comments
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- Fix some sound quality & distortion problems.
Signed-off-by: Ricardo Cerqueira
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- Return -EINVAL for unknown commands.
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
- Moved MSP_SET_MATRIX to v4l2-common.h
- Fix typos and integer overflows in tea5767.c
- Split old freq field into a tv_freq and a radio_freq. Prevents
that a radio tuner is initialized with a tv frequency or vice versa.
- When switching to radio mode initialize the tuner with the last
used radio frequency (this was already done for the TV mode).
As a result of these changes the tuner module now remembers the
last set radio and TV frequencies, which is what you would expect
to happen.
- Move out of range frequencies to the closest valid frequency as per
v4l2 API spec.
- Fix incorrect initial radio frequency (multiplier is 16000, not 16)
- Add boundary check for out of range frequencies.
- Use new flag to check if the order of the CB and freq. depends on
the last set frequency. That is needed for some tuners or you can
get static as a result. The flag is added for those tuners where I know
that the datasheet indicates that this is necessary.
- For this new check use the last set div value, not the last frequency
as radio frequencies are always much higher due to the 16000 multiplier.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
- Tda988x parameters should be defined per tuner_param_type,
for each tuner_params array member.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab
15 Jan, 2006
8 commits
-
- Not sure what went wrong here, but SND_PCI_PM_CALLBACKS got deleted.
Signed-off-by: Andrew Morton
Signed-off-by: Mauro Carvalho Chehab -
- BOOT_SIZE name is also used at alpha and were breaking
compiling with allyesconfig.
- All BOOT_* renamed to AV7110_BOOT* to fix and keep names
with the same style.
Thanks to Andrew Morton for pointing this.Signed-off-by: Mauro Carvalho Chehab
-
- Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.Signed-off-by: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Mauro Carvalho Chehab -
- Workaround to fix a known regression at cx88-tvaudio.c
- provide a module parameter workaround to always enable
analog output.Signed-off-by: Panagiotis Christeas
Signed-off-by: Mauro Carvalho Chehab -
- This patch makes some needlessly global code static.
Signed-off-by: Adrian Bunk
Signed-off-by: Mauro Carvalho Chehab -
- Cx88 alsa is experimental.
- Removed need of PCM OSS for an ALSA module.Signed-off-by: Mauro Carvalho Chehab
-
- Enabled audio PLL. This is mandatory for NICAM sound
- modify FM IF frequency to 5.5MHz for SAA7133/35 if tuner is tda8290Signed-off-by: Hartmut Hackmann
Signed-off-by: Mauro Carvalho Chehab -
- Add i2c ids for drivers: upd64031a saa717x upd64083 wm8739
Signed-off-by: Tyler Trafford
Signed-off-by: Mauro Carvalho Chehab
14 Jan, 2006
9 commits
-
- Add param_type dvbs2
- disable all dvb param_types, which will not
be needed until we merge dvb-pll.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- Add support for Samsung tuner TCPN 2121P30A, used in
Hauppauge PVR-500 cards.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
- Tunertype struct redefined to allow one or more tuner_params structs
per tuner definition, one for each video standard.
- Each tuner_params struct has an element containing an arbitrary
amount of tuner_ranges.
(this is needed for dvb tuners - to be handled later)
- A tuner_range may be referenced by multiple tuner_params structs.
There are many duplicates in here. Reusing tuner_range structs,
rather than defining new ones for each tuner, will cut down on
memory usage, and is preferred when possible.
- tunertype struct contains an element, has_tda988x.
We must set this for all tunertypes that contain a tda988x
chip, and then we can remove this setting from the various
card structs.
- Improves tuners array memory usage efficiency.
- Right now, all tuners are using the first tuner_params[] array element
for analog mode. In the future, we will be merging similar tuner
definitions together, such that each tuner definition will have a
tuner_params struct for each available video standard. At that point,
the tuner_params[] array element will be chosen based on the video
standard in use.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- Updated MODULE_AUTHOR
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- Build cx88-alsa when CONFIG_VIDEO_CX88_ALSA is selected.
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- Include missing MODULE_* macros.
- Fixed cx88_vp3054_i2c: module license 'unspecified' taints kernel.Signed-off-by: Mauro Carvalho Chehab
-
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.build-tested.
Signed-off-by: Ingo Molnar
Signed-off-by: Mauro Carvalho Chehab -
Changes MODULE_PARM usage to module_param
Signed-off-by: Eric Sesterhenn
Signed-off-by: Mauro Carvalho Chehab -
- Static vars are equal to zero by default. Removed unnecessary =0 from them,
saving some data spaceSigned-off-by: Mauro Carvalho Chehab
13 Jan, 2006
17 commits
-
At least some versions of the via-velocity hardware only support
checksumming IPv4 frames in hardware. However, the driver is currently
setting the NETIF_F_HW_CSUM flag, which indicates support for more than
just IPv4. This results in errors when trying to use IPv6 over
via-velocity hardware.Signed-off-by: John W. Linville
Signed-off-by: Jeff Garzik -
The comments in ieee80211.h claim that one doesn't need to set the len
parameter of the stats struct. But if one doesn't, the management frames
are read far over the memory they actually occupy causing badness.Signed-Off-By: Johannes Berg
Signed-off-by: Jeff Garzik
-
I believe I see the race Michael refers to (tlb_choose_channel
may set head, which tlb_init_slave clears), although I was not able to
reproduce it. I have updated his patch for the current netdev-2.6.git
tree and added a version update. His original comment follows:Our systems have been crashing during testing of PCI HotPlug
support in the various networking components. We've faulted in
the bonding driver due to a bug in bond_alb.c:tlb_clear_slave()In that routine, the last modification to the TLB hash table is
made without protection of the lock, allowing a race that can lead
tlb_choose_channel() to select an invalid table element.-J
Signed-off-by: Jeff Garzik
-
This patch allows the Atmel driver to work correctly with wpa_supplicant
and other programs that require some conformance with WEXT-18. It
should not affect current behavior of the driver. The patch does four
things:1) Implements SIOCSIWENCODEEXT, SIOCGIWENCODEEXT, SIOCSIWAUTH, and
SIOCGIWAUTH calls for unencrypted and WEP operation2) Accepts zero-filled addresses for SIOCSIWAP, which are legal and
should turn off any previous forced WAP address3) Sends association and de-association events to userspace at most of
the appropriate times4) Fixes erroneous order of CIPHER_SUITE_WEP_* arguments in one location
which are actually unused anywaySigned-off-by: Dan Williams
Signed-off-by: Jeff Garzik -
Replace the MODULE_PARM usage in uli526x.c with module_param.
Signed-off-by: Eric Sesterhenn
Signed-off-by: Jeff Garzik -
Make the driver produce the string used by phy_connect and have board specific
code pass the integer mii bus id and phy device id for the specific controller
instance.Signed-off-by: Kumar Gala
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
Add the PHY_ID_FMT macro to ensure that the format of the id string used by a
driver to match to its specific phy is consistent between the mdio_bus and the
driver.Signed-off-by: Kumar Gala
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
We can now have the gianfar mii platform device have a proper resource for the
IO memory region for its registers. Previously we passed this information
that the platform_data structure because we couldn't handle overlapping memory
regions for platform devices.Signed-off-by: Kumar Gala
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
Missing include of to get definition of IPPROTO_UDP.
Signed-off-by: Kumar Gala
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
airo.c currently has MICSUPPORT enabled, which requires CONFIG_CRYPTO. A
user reported a build failure which is due to the lack of a Kconfig
dependency. See http://bugs.debian.org/344205.This patch makes Kconfig enforce this dependency.
Signed-off-by: dann frazier
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
We have identified two related bugs in the e100 driver.
Both bugs are related to manipulation of the MDI control register.
The first problem is that the Ready bit is being ignored when writing to
the Control register; we noticed this because the Linux bonding driver
would occasionally come to the spurious conclusion that the link was down
when querying Link State. It turned out that by failing to wait for a
previous command to complete it was selecting what was essentially a random
register in the MDI register set. When we added code that waits for the
Ready bit (as shown in the patch file below) all such problems ceased.The second problem is that, although access to the MDI registers involves
multiple steps which must not be intermixed, nothing was defending against
two or more threads attempting simultaneous access. The most obvious
situation where such interference could occur involves the watchdog versus
ioctl paths, but there are probably others, so we recommend the locking
shown in our patch file.Signed-off-by: Michael O'Donnell
Cc: "David S. Miller"
Cc: Jeff Garzik
Cc: John Ronciak
Cc: Ganesh Venkatesan
Cc: Jesse Brandeburg
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik
