/*

   * (C) Copyright 2000-2009

   * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */
  
  /*
   *  Definitions for Command Processor
   */
  #ifndef __COMMAND_H
  #define __COMMAND_H

  #include <linker_lists.h>

  #ifndef NULL
  #define NULL	0
  #endif

  /* Default to a width of 8 characters for help message command width */
  #ifndef CONFIG_SYS_HELP_CMD_WIDTH
  #define CONFIG_SYS_HELP_CMD_WIDTH	8
  #endif

  #ifndef	__ASSEMBLY__
  /*
   * Monitor Command Table
   */
  
  struct cmd_tbl_s {
  	char		*name;		/* Command Name			*/

  	int		maxargs;	/* maximum number of arguments	*/
  	int		repeatable;	/* autorepeat allowed?		*/
  					/* Implementation function	*/

  	int		(*cmd)(struct cmd_tbl_s *, int, int, char * const []);

  	char		*usage;		/* Usage message	(short)	*/

  #ifdef	CONFIG_SYS_LONGHELP

  	char		*help;		/* Help  message	(long)	*/
  #endif

  #ifdef CONFIG_AUTO_COMPLETE
  	/* do auto completion on the arguments */

  	int		(*complete)(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);

  #endif

  };
  
  typedef struct cmd_tbl_s	cmd_tbl_t;

  #if defined(CONFIG_CMD_RUN)
  extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  #endif

  
  /* common/command.c */

  int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int

  	      flag, int argc, char * const argv[]);

  cmd_tbl_t *find_cmd(const char *cmd);

  cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len);

  extern int cmd_usage(const cmd_tbl_t *cmdtp);

  #ifdef CONFIG_AUTO_COMPLETE

  extern int var_complete(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);

  extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp);
  #endif

  /**
   * cmd_process_error() - report and process a possible error
   *
   * @cmdtp: Command which caused the error
   * @err: Error code (0 if none, -ve for error, like -EIO)
   * @return 0 if there is not error, 1 (CMD_RET_FAILURE) if an error is found
   */
  int cmd_process_error(cmd_tbl_t *cmdtp, int err);

  /*
   * Monitor Command
   *
   * All commands use a common argument format:
   *

   * void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

   */

  #if defined(CONFIG_CMD_MEMORY) || \
  	defined(CONFIG_CMD_I2C) || \
  	defined(CONFIG_CMD_ITEST) || \
  	defined(CONFIG_CMD_PCI)

  #define CMD_DATA_SIZE
  extern int cmd_get_data_size(char* arg, int default_size);
  #endif

  #ifdef CONFIG_CMD_BOOTD
  extern int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  #endif

  #ifdef CONFIG_CMD_BOOTM

  extern int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

  extern int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd);
  #else
  static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
  {
  	return 0;
  }
  #endif

  extern int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

  extern int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

  extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
  			   char *const argv[]);

  extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

  extern int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

  /*
   * Error codes that commands return to cmd_process(). We use the standard 0
   * and 1 for success and failure, but add one more case - failure with a
   * request to call cmd_usage(). But the cmd_process() function handles
   * CMD_RET_USAGE itself and after calling cmd_usage() it will return 1.
   * This is just a convenience for commands to avoid them having to call
   * cmd_usage() all over the place.
   */
  enum command_ret_t {
  	CMD_RET_SUCCESS,	/* 0 = Success */
  	CMD_RET_FAILURE,	/* 1 = Failure */
  	CMD_RET_USAGE = -1,	/* Failure, please report 'usage' error */
  };
  
  /**
   * Process a command with arguments. We look up the command and execute it
   * if valid. Otherwise we print a usage message.
   *
   * @param flag		Some flags normally 0 (see CMD_FLAG_.. above)
   * @param argc		Number of arguments (arg 0 must be the command text)
   * @param argv		Arguments
   * @param repeatable	This function sets this to 0 if the command is not
   *			repeatable. If the command is repeatable, the value
   *			is left unchanged.

   * @param ticks		If ticks is not null, this function set it to the
   *			number of ticks the command took to complete.

   * @return 0 if the command succeeded, 1 if it failed
   */
  int cmd_process(int flag, int argc, char * const argv[],

  			       int *repeatable, unsigned long *ticks);

  void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);

  
  /**
   * board_run_command() - Fallback function to execute a command
   *
   * When no command line features are enabled in U-Boot, this function is
   * called to execute a command. Typically the function can look at the
   * command and perform a few very specific tasks, such as booting the
   * system in a particular way.
   *
   * This function is only used when CONFIG_CMDLINE is not enabled.
   *
   * In normal situations this function should not return, since U-Boot will
   * simply hang.
   *
   * @cmdline:	Command line string to execute
   * @return 0 if OK, 1 for error
   */
  int board_run_command(const char *cmdline);

  #endif	/* __ASSEMBLY__ */
  
  /*
   * Command Flags:
   */
  #define CMD_FLAG_REPEAT		0x0001	/* repeat last command		*/
  #define CMD_FLAG_BOOTD		0x0002	/* command is from bootd	*/

  #define CMD_FLAG_ENV		0x0004	/* command is from the environment */

  #ifdef CONFIG_AUTO_COMPLETE
  # define _CMD_COMPLETE(x) x,
  #else
  # define _CMD_COMPLETE(x)
  #endif
  #ifdef CONFIG_SYS_LONGHELP
  # define _CMD_HELP(x) x,
  #else
  # define _CMD_HELP(x)
  #endif

  #ifdef CONFIG_CMDLINE

  #define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,		\
  				_usage, _help, _comp)			\
  		{ #_name, _maxargs, _rep, _cmd, _usage,			\
  			_CMD_HELP(_help) _CMD_COMPLETE(_comp) }

  #define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \

  	ll_entry_declare(cmd_tbl_t, _name, cmd) =			\

  		U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,	\
  						_usage, _help, _comp);

  #else
  #define U_BOOT_SUBCMD_START(name)	static cmd_tbl_t name[] = {};
  #define U_BOOT_SUBCMD_END
  
  #define _CMD_REMOVE(_name, _cmd)					\
  	int __remove_ ## _name(void)					\
  	{								\
  		if (0)							\
  			_cmd(NULL, 0, 0, NULL);				\
  		return 0;						\
  	}
  #define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, _usage,	\
  				  _help, _comp)				\
  		{ #_name, _maxargs, _rep, 0 ? _cmd : NULL, _usage,	\
  			_CMD_HELP(_help) _CMD_COMPLETE(_comp) }
  
  #define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help,	\
  			    _comp)				\
  	_CMD_REMOVE(sub_ ## _name, _cmd)
  
  #endif /* CONFIG_CMDLINE */

  #define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help)		\
  	U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)

  #define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help)	\
  	U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,		\
  					_usage, _help, NULL)

  #endif	/* __COMMAND_H */