Summary
  =======
  
  This README is about U-Boot support for TI's ARM 926EJS based family of SoCs.
  These SOCs are used for cameras, video security and surveillance, DVR's, etc.
  DaVinci SOC's comprise of DM644x, DM646x, DM35x and DM36x series of SOC's
  Additionally there are some SOCs meant for the audio market which though have
  an OMAP part number are very similar to the DaVinci series of SOC's
  Additionally, some family members contain a TI DSP and/or graphics
  co processors along with a host of other peripherals.
  
  Currently the following boards are supported:
  
  * TI DaVinci DM644x EVM
  
  * TI DaVinci DM646x EVM
  
  * TI DaVinci DM355 EVM
  
  * TI DaVinci DM365 EVM
  
  * TI DA830 EVM

  * TI DA850 EVM

  * DM355 based Leopard board
  
  * DM644x based schmoogie board
  
  * DM644x based sffsdr board
  
  * DM644x based sonata board
  
  Build
  =====
  
  * TI DaVinci DM644x EVM:
  
  make davinci_dvevm_config
  make
  
  * TI DaVinci DM646x EVM:
  
  make davinci_dm6467evm_config
  make
  
  * TI DaVinci DM355 EVM:
  
  make davinci_dm355evm_config
  make
  
  * TI DaVinci DM365 EVM:
  
  make davinci_dm365evm_config
  make
  
  * TI DA830 EVM:
  
  make da830evm_config
  make

  * TI DA850 EVM:
  
  make da850evm_config
  make

  * DM355 based Leopard board:
  
  make davinci_dm355leopard_config
  make
  
  * DM644x based schmoogie board:
  
  make davinci_schmoogie_config
  make
  
  * DM644x based sffsdr board:
  
  make davinci_sffsdr_config
  make
  
  * DM644x based sonata board:
  
  make davinci_sonata_config
  make
  
  Bootloaders
  ===============
  
  The DaVinci SOC's use 2 bootloaders. The low level initialization
  is done by a UBL(user boot loader). The UBL is written to a NAND/NOR/SPI flash
  by a programmer. During initial bootup, the ROM Bootloader reads the UBL
  from a storage device and loads it into the IRAM. The UBL then loads the U-Boot
  into the RAM.
  The programmers and UBL are always released as part of any standard TI
  software release associated with an SOC.

  Alternative boot method (DA850 EVM only):
  For the DA850 EVM an SPL (secondary program loader, see doc/README.SPL)
  is provided to load U-Boot directly from SPI flash. In this case, the
  SPL does the low level initialization that is otherwise done by the SPL.
  To build U-Boot with this SPL, do
  make da850evm_config
  make u-boot.ais
  and program the resulting u-boot.ais file to the SPI flash of the DA850 EVM.

  Environment Variables
  =====================
  
  The DA850 EVM allows the user to specify the maximum cpu clock allowed by the
  silicon, in Hz, via an environment variable "maxcpuclk".
  
  The maximum clock rate allowed depends on the silicon populated on the EVM.
  Please make sure you understand the restrictions placed on this clock in the
  device specific datasheet before setting up this variable. This information is
  passed to the Linux kernel using the ATAG_REVISION atag.
  
  If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK
  is used to obtain this information.

  Links
  =====
  
  1) TI DaVinci DM355 EVM:
  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
  http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=203&osCsid=c499af6087317f11b3da19b4e8f1af32
  
  2) TI DaVinci DM365 EVM:
  http://focus.ti.com/docs/prod/folders/print/tms320dm365.html?247SEM=
  http://support.spectrumdigital.com/boards/evmdm365/revc/
  
  3) DaVinci DM355 based leopard board
  http://designsomething.org/leopardboard/default.aspx
  http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=192&osCsid=67c20335668ffc57cb35727106eb24b1
  
  4) TI DaVinci DM6467 EVM:
  http://focus.ti.com/docs/prod/folders/print/tms320dm6467.html
  http://support.spectrumdigital.com/boards/evmdm6467/revf/
  
  5) TI DaVinci DM6446 EVM:
  http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html
  http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=222
  
  6) TI DA830 EVM
  http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
  http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214

  
  7) TI DA850 EVM
  http://focus.ti.com/docs/prod/folders/print/omap-l138.html
  http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit

  
  Davinci special defines
  =======================
  
  CONFIG_SYS_DV_NOR_BOOT_CFG:	AM18xx based boards, booting in NOR Boot mode
  				need a "NOR Boot Configuration Word" stored
  				in the NOR Flash. This define adds this.
  				More Info about this, see:
  				spraba5a.pdf chapter 3.1