/*
   * Copyright (c) 2011 The Chromium OS Authors.
   * (C) Copyright 2002-2006
   * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   *
   * (C) Copyright 2002
   * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   * Marius Groeger <mgroeger@sysgo.de>
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */
  
  #include <common.h>
  #include <linux/compiler.h>
  #include <version.h>
  #include <environment.h>
  #include <fdtdec.h>

  #include <fs.h>

  #if defined(CONFIG_CMD_IDE)
  #include <ide.h>
  #endif
  #include <i2c.h>

  #include <initcall.h>
  #include <logbuff.h>

  
  /* TODO: Can we move these into arch/ headers? */
  #ifdef CONFIG_8xx
  #include <mpc8xx.h>
  #endif
  #ifdef CONFIG_5xx
  #include <mpc5xx.h>
  #endif
  #ifdef CONFIG_MPC5xxx
  #include <mpc5xxx.h>
  #endif

  #include <os.h>

  #include <post.h>

  #include <spi.h>

  #include <trace.h>

  #include <watchdog.h>

  #include <asm/errno.h>

  #include <asm/io.h>

  #ifdef CONFIG_MP
  #include <asm/mp.h>
  #endif

  #include <asm/sections.h>

  #ifdef CONFIG_X86
  #include <asm/init_helpers.h>
  #include <asm/relocate.h>
  #endif

  #ifdef CONFIG_SANDBOX
  #include <asm/state.h>
  #endif

  #include <linux/compiler.h>
  
  /*
   * Pointer to initial global data area
   *
   * Here we initialize it if needed.
   */
  #ifdef XTRN_DECLARE_GLOBAL_DATA_PTR
  #undef	XTRN_DECLARE_GLOBAL_DATA_PTR
  #define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
  DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR);
  #else
  DECLARE_GLOBAL_DATA_PTR;
  #endif
  
  /*
   * sjg: IMO this code should be
   * refactored to a single function, something like:
   *
   * void led_set_state(enum led_colour_t colour, int on);
   */
  /************************************************************************
   * Coloured LED functionality
   ************************************************************************
   * May be supplied by boards if desired
   */
  inline void __coloured_LED_init(void) {}
  void coloured_LED_init(void)
  	__attribute__((weak, alias("__coloured_LED_init")));
  inline void __red_led_on(void) {}
  void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
  inline void __red_led_off(void) {}
  void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
  inline void __green_led_on(void) {}
  void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
  inline void __green_led_off(void) {}
  void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
  inline void __yellow_led_on(void) {}
  void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
  inline void __yellow_led_off(void) {}
  void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
  inline void __blue_led_on(void) {}
  void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
  inline void __blue_led_off(void) {}
  void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
  
  /*
   * Why is gd allocated a register? Prior to reloc it might be better to
   * just pass it around to each function in this file?
   *
   * After reloc one could argue that it is hardly used and doesn't need
   * to be in a register. Or if it is it should perhaps hold pointers to all
   * global data for all modules, so that post-reloc we can avoid the massive
   * literal pool we get on ARM. Or perhaps just encourage each module to use
   * a structure...
   */
  
  /*
   * Could the CONFIG_SPL_BUILD infection become a flag in gd?
   */

  #if defined(CONFIG_WATCHDOG)
  static int init_func_watchdog_init(void)
  {
  	puts("       Watchdog enabled
  ");
  	WATCHDOG_RESET();
  
  	return 0;
  }
  
  int init_func_watchdog_reset(void)
  {
  	WATCHDOG_RESET();
  
  	return 0;
  }
  #endif /* CONFIG_WATCHDOG */
  
  void __board_add_ram_info(int use_default)
  {
  	/* please define platform specific board_add_ram_info() */
  }
  
  void board_add_ram_info(int)
  	__attribute__ ((weak, alias("__board_add_ram_info")));

  static int init_baud_rate(void)
  {
  	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
  	return 0;
  }
  
  static int display_text_info(void)
  {

  #ifndef CONFIG_SANDBOX

  	ulong bss_start, bss_end;

  #ifdef CONFIG_SYS_SYM_OFFSETS

  	bss_start = _bss_start_ofs + _TEXT_BASE;
  	bss_end = _bss_end_ofs + _TEXT_BASE;

  #else
  	bss_start = (ulong)&__bss_start;
  	bss_end = (ulong)&__bss_end;
  #endif

  	debug("U-Boot code: %08X -> %08lX  BSS: -> %08lX
  ",
  	      CONFIG_SYS_TEXT_BASE, bss_start, bss_end);

  #endif

  
  #ifdef CONFIG_MODEM_SUPPORT
  	debug("Modem Support enabled
  ");
  #endif
  #ifdef CONFIG_USE_IRQ
  	debug("IRQ Stack: %08lx
  ", IRQ_STACK_START);
  	debug("FIQ Stack: %08lx
  ", FIQ_STACK_START);
  #endif
  
  	return 0;
  }
  
  static int announce_dram_init(void)
  {
  	puts("DRAM:  ");
  	return 0;
  }

  #ifdef CONFIG_PPC
  static int init_func_ram(void)
  {
  #ifdef	CONFIG_BOARD_TYPES
  	int board_type = gd->board_type;
  #else
  	int board_type = 0;	/* use dummy arg */
  #endif
  
  	gd->ram_size = initdram(board_type);
  
  	if (gd->ram_size > 0)
  		return 0;
  
  	puts("*** failed ***
  ");
  	return 1;
  }
  #endif

  static int show_dram_config(void)
  {
  	ulong size;
  
  #ifdef CONFIG_NR_DRAM_BANKS
  	int i;
  
  	debug("
  RAM Configuration:
  ");
  	for (i = size = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
  		size += gd->bd->bi_dram[i].size;
  		debug("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
  #ifdef DEBUG
  		print_size(gd->bd->bi_dram[i].size, "
  ");
  #endif
  	}
  	debug("
  DRAM:  ");
  #else
  	size = gd->ram_size;
  #endif

  	print_size(size, "");
  	board_add_ram_info(0);
  	putc('
  ');

  
  	return 0;
  }

  ulong get_effective_memsize(void)
  {
  #ifndef	CONFIG_VERY_BIG_RAM
  	return gd->ram_size;
  #else
  	/* limit stack to what we can reasonable map */
  	return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
  		CONFIG_MAX_MEM_MAPPED : gd->ram_size);
  #endif
  }

  void __dram_init_banksize(void)
  {
  #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
  	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
  	gd->bd->bi_dram[0].size = get_effective_memsize();
  #endif
  }
  
  void dram_init_banksize(void)
  	__attribute__((weak, alias("__dram_init_banksize")));

  #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)

  static int init_func_i2c(void)
  {
  	puts("I2C:   ");

  #ifdef CONFIG_SYS_I2C
  	i2c_init_all();
  #else

  	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);

  #endif

  	puts("ready
  ");
  	return 0;
  }
  #endif
  
  #if defined(CONFIG_HARD_SPI)
  static int init_func_spi(void)
  {
  	puts("SPI:   ");
  	spi_init();
  	puts("ready
  ");
  	return 0;
  }
  #endif
  
  __maybe_unused

  static int zero_global_data(void)
  {
  	memset((void *)gd, '\0', sizeof(gd_t));
  
  	return 0;
  }
  
  static int setup_mon_len(void)
  {

  #ifdef CONFIG_SYS_SYM_OFFSETS

  	gd->mon_len = _bss_end_ofs;

  #elif defined(CONFIG_SANDBOX)
  	gd->mon_len = (ulong)&_end - (ulong)_init;

  #else

  	/* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */
  	gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;

  #endif

  	return 0;
  }
  
  __weak int arch_cpu_init(void)
  {
  	return 0;
  }

  #ifdef CONFIG_OF_HOSTFILE
  
  #define CHECK(x)		err = (x); if (err) goto failed;
  
  /* Create an empty device tree blob */
  static int make_empty_fdt(void *fdt)
  {
  	int err;
  
  	CHECK(fdt_create(fdt, 256));
  	CHECK(fdt_finish_reservemap(fdt));
  	CHECK(fdt_begin_node(fdt, ""));
  	CHECK(fdt_end_node(fdt));
  	CHECK(fdt_finish(fdt));
  
  	return 0;
  failed:
  	printf("Unable to create empty FDT: %s
  ", fdt_strerror(err));
  	return -EACCES;
  }
  
  static int read_fdt_from_file(void)
  {
  	struct sandbox_state *state = state_get_current();
  	void *blob;
  	int size;
  	int err;
  
  	blob = map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR, 0);
  	if (!state->fdt_fname) {
  		err = make_empty_fdt(blob);
  		if (!err)
  			goto done;
  		return err;
  	}
  	err = fs_set_blk_dev("host", NULL, FS_TYPE_SANDBOX);
  	if (err)
  		return err;
  	size = fs_read(state->fdt_fname, CONFIG_SYS_FDT_LOAD_ADDR, 0, 0);
  	if (size < 0)
  		return -EIO;
  
  done:
  	gd->fdt_blob = blob;
  
  	return 0;
  }
  #endif

  #ifdef CONFIG_SANDBOX
  static int setup_ram_buf(void)
  {

  	struct sandbox_state *state = state_get_current();
  
  	gd->arch.ram_buf = state->ram_buf;
  	gd->ram_size = state->ram_size;

  
  	return 0;
  }
  #endif

  static int setup_fdt(void)
  {
  #ifdef CONFIG_OF_EMBED
  	/* Get a pointer to the FDT */
  	gd->fdt_blob = _binary_dt_dtb_start;
  #elif defined CONFIG_OF_SEPARATE
  	/* FDT is at end of image */

  # ifdef CONFIG_SYS_SYM_OFFSETS

  	gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE);

  # else
  	gd->fdt_blob = (ulong *)&_end;
  # endif

  #elif defined(CONFIG_OF_HOSTFILE)
  	if (read_fdt_from_file()) {
  		puts("Failed to read control FDT
  ");
  		return -1;
  	}

  #endif
  	/* Allow the early environment to override the fdt address */
  	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
  						(uintptr_t)gd->fdt_blob);
  	return 0;
  }
  
  /* Get the top of usable RAM */
  __weak ulong board_get_usable_ram_top(ulong total_size)
  {
  	return gd->ram_top;
  }
  
  static int setup_dest_addr(void)
  {
  	debug("Monitor len: %08lX
  ", gd->mon_len);
  	/*
  	 * Ram is setup, size stored in gd !!
  	 */
  	debug("Ram size: %08lX
  ", (ulong)gd->ram_size);
  #if defined(CONFIG_SYS_MEM_TOP_HIDE)
  	/*
  	 * Subtract specified amount of memory to hide so that it won't
  	 * get "touched" at all by U-Boot. By fixing up gd->ram_size
  	 * the Linux kernel should now get passed the now "corrected"
  	 * memory size and won't touch it either. This should work
  	 * for arch/ppc and arch/powerpc. Only Linux board ports in
  	 * arch/powerpc with bootwrapper support, that recalculate the
  	 * memory size from the SDRAM controller setup will have to
  	 * get fixed.
  	 */
  	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
  #endif
  #ifdef CONFIG_SYS_SDRAM_BASE
  	gd->ram_top = CONFIG_SYS_SDRAM_BASE;
  #endif

  	gd->ram_top += get_effective_memsize();

  	gd->ram_top = board_get_usable_ram_top(gd->mon_len);

  	gd->relocaddr = gd->ram_top;

  	debug("Ram top: %08lX
  ", (ulong)gd->ram_top);

  #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
  	/*
  	 * We need to make sure the location we intend to put secondary core
  	 * boot code is reserved and not used by any part of u-boot
  	 */

  	if (gd->relocaddr > determine_mp_bootpg(NULL)) {
  		gd->relocaddr = determine_mp_bootpg(NULL);
  		debug("Reserving MP boot page to %08lx
  ", gd->relocaddr);

  	}
  #endif

  	return 0;
  }
  
  #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
  static int reserve_logbuffer(void)
  {
  	/* reserve kernel log buffer */

  	gd->relocaddr -= LOGBUFF_RESERVE;

  	debug("Reserving %dk for kernel logbuffer at %08lx
  ", LOGBUFF_LEN,

  		gd->relocaddr);

  	return 0;
  }
  #endif
  
  #ifdef CONFIG_PRAM
  /* reserve protected RAM */
  static int reserve_pram(void)
  {
  	ulong reg;
  
  	reg = getenv_ulong("pram", 10, CONFIG_PRAM);

  	gd->relocaddr -= (reg << 10);		/* size is in kB */

  	debug("Reserving %ldk for protected RAM at %08lx
  ", reg,

  	      gd->relocaddr);

  	return 0;
  }
  #endif /* CONFIG_PRAM */
  
  /* Round memory pointer down to next 4 kB limit */
  static int reserve_round_4k(void)
  {

  	gd->relocaddr &= ~(4096 - 1);

  	return 0;
  }
  
  #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
  		defined(CONFIG_ARM)
  static int reserve_mmu(void)
  {
  	/* reserve TLB table */

  	gd->arch.tlb_size = PGTABLE_SIZE;

  	gd->relocaddr -= gd->arch.tlb_size;

  
  	/* round down to next 64 kB limit */

  	gd->relocaddr &= ~(0x10000 - 1);

  	gd->arch.tlb_addr = gd->relocaddr;

  	debug("TLB table from %08lx to %08lx
  ", gd->arch.tlb_addr,
  	      gd->arch.tlb_addr + gd->arch.tlb_size);
  	return 0;
  }
  #endif
  
  #ifdef CONFIG_LCD
  static int reserve_lcd(void)
  {
  #ifdef CONFIG_FB_ADDR
  	gd->fb_base = CONFIG_FB_ADDR;
  #else
  	/* reserve memory for LCD display (always full pages) */

  	gd->relocaddr = lcd_setmem(gd->relocaddr);
  	gd->fb_base = gd->relocaddr;

  #endif /* CONFIG_FB_ADDR */
  	return 0;
  }
  #endif /* CONFIG_LCD */

  static int reserve_trace(void)
  {
  #ifdef CONFIG_TRACE
  	gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE;
  	gd->trace_buff = map_sysmem(gd->relocaddr, CONFIG_TRACE_BUFFER_SIZE);
  	debug("Reserving %dk for trace data at: %08lx
  ",
  	      CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr);
  #endif
  
  	return 0;
  }

  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \

  		&& !defined(CONFIG_ARM) && !defined(CONFIG_X86)

  static int reserve_video(void)
  {
  	/* reserve memory for video display (always full pages) */

  	gd->relocaddr = video_setmem(gd->relocaddr);
  	gd->fb_base = gd->relocaddr;

  
  	return 0;
  }
  #endif

  static int reserve_uboot(void)
  {
  	/*
  	 * reserve memory for U-Boot code, data & bss
  	 * round down to next 4 kB limit
  	 */

  	gd->relocaddr -= gd->mon_len;
  	gd->relocaddr &= ~(4096 - 1);

  #ifdef CONFIG_E500
  	/* round down to next 64 kB limit so that IVPR stays aligned */

  	gd->relocaddr &= ~(65536 - 1);

  #endif

  
  	debug("Reserving %ldk for U-Boot at: %08lx
  ", gd->mon_len >> 10,

  	      gd->relocaddr);
  
  	gd->start_addr_sp = gd->relocaddr;

  	return 0;
  }

  #ifndef CONFIG_SPL_BUILD

  /* reserve memory for malloc() area */
  static int reserve_malloc(void)
  {

  	gd->start_addr_sp = gd->start_addr_sp - TOTAL_MALLOC_LEN;

  	debug("Reserving %dk for malloc() at: %08lx
  ",

  			TOTAL_MALLOC_LEN >> 10, gd->start_addr_sp);

  	return 0;
  }
  
  /* (permanently) allocate a Board Info struct */
  static int reserve_board(void)
  {

  	gd->start_addr_sp -= sizeof(bd_t);
  	gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));

  	memset(gd->bd, '\0', sizeof(bd_t));
  	debug("Reserving %zu Bytes for Board Info at: %08lx
  ",

  			sizeof(bd_t), gd->start_addr_sp);

  	return 0;
  }

  #endif

  
  static int setup_machine(void)
  {
  #ifdef CONFIG_MACH_TYPE
  	gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
  #endif
  	return 0;
  }
  
  static int reserve_global_data(void)
  {

  	gd->start_addr_sp -= sizeof(gd_t);
  	gd->new_gd = (gd_t *)map_sysmem(gd->start_addr_sp, sizeof(gd_t));

  	debug("Reserving %zu Bytes for Global Data at: %08lx
  ",

  			sizeof(gd_t), gd->start_addr_sp);

  	return 0;
  }
  
  static int reserve_fdt(void)
  {
  	/*
  	 * If the device tree is sitting immediate above our image then we
  	 * must relocate it. If it is embedded in the data section, then it
  	 * will be relocated with other data.
  	 */
  	if (gd->fdt_blob) {
  		gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);

  		gd->start_addr_sp -= gd->fdt_size;
  		gd->new_fdt = map_sysmem(gd->start_addr_sp, gd->fdt_size);

  		debug("Reserving %lu Bytes for FDT at: %08lx
  ",

  		      gd->fdt_size, gd->start_addr_sp);

  	}
  
  	return 0;
  }
  
  static int reserve_stacks(void)
  {

  #ifdef CONFIG_SPL_BUILD
  # ifdef CONFIG_ARM

  	gd->start_addr_sp -= 128;	/* leave 32 words for abort-stack */
  	gd->irq_sp = gd->start_addr_sp;

  # endif
  #else

  # ifdef CONFIG_PPC
  	ulong *s;
  # endif

  	/* setup stack pointer for exceptions */

  	gd->start_addr_sp -= 16;
  	gd->start_addr_sp &= ~0xf;
  	gd->irq_sp = gd->start_addr_sp;

  
  	/*
  	 * Handle architecture-specific things here
  	 * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
  	 * to handle this and put in arch/xxx/lib/stack.c
  	 */

  # if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)

  #  ifdef CONFIG_USE_IRQ

  	gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);

  	debug("Reserving %zu Bytes for IRQ stack at: %08lx
  ",

  		CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);

  
  	/* 8-byte alignment for ARM ABI compliance */

  	gd->start_addr_sp &= ~0x07;

  #  endif
  	/* leave 3 words for abort-stack, plus 1 for alignment */

  	gd->start_addr_sp -= 16;

  # elif defined(CONFIG_PPC)
  	/* Clear initial stack frame */

  	s = (ulong *) gd->start_addr_sp;

  	*s = 0; /* Terminate back chain */
  	*++s = 0; /* NULL return address */

  # endif /* Architecture specific code */

  
  	return 0;

  #endif

  }
  
  static int display_new_sp(void)
  {

  	debug("New Stack Pointer is: %08lx
  ", gd->start_addr_sp);

  
  	return 0;
  }

  #ifdef CONFIG_PPC
  static int setup_board_part1(void)
  {
  	bd_t *bd = gd->bd;
  
  	/*
  	 * Save local variables to board info struct
  	 */
  
  	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;	/* start of memory */
  	bd->bi_memsize = gd->ram_size;			/* size in bytes */
  
  #ifdef CONFIG_SYS_SRAM_BASE
  	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;	/* start of SRAM */
  	bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;		/* size  of SRAM */
  #endif
  
  #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
  		defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
  	bd->bi_immr_base = CONFIG_SYS_IMMR;	/* base  of IMMR register     */
  #endif
  #if defined(CONFIG_MPC5xxx)
  	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
  #endif
  #if defined(CONFIG_MPC83xx)
  	bd->bi_immrbar = CONFIG_SYS_IMMR;
  #endif

  
  	return 0;
  }
  
  static int setup_board_part2(void)
  {
  	bd_t *bd = gd->bd;
  
  	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
  	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
  #if defined(CONFIG_CPM2)
  	bd->bi_cpmfreq = gd->arch.cpm_clk;
  	bd->bi_brgfreq = gd->arch.brg_clk;
  	bd->bi_sccfreq = gd->arch.scc_clk;
  	bd->bi_vco = gd->arch.vco_out;
  #endif /* CONFIG_CPM2 */
  #if defined(CONFIG_MPC512X)
  	bd->bi_ipsfreq = gd->arch.ips_clk;
  #endif /* CONFIG_MPC512X */
  #if defined(CONFIG_MPC5xxx)
  	bd->bi_ipbfreq = gd->arch.ipb_clk;
  	bd->bi_pcifreq = gd->pci_clk;
  #endif /* CONFIG_MPC5xxx */
  
  	return 0;
  }
  #endif
  
  #ifdef CONFIG_SYS_EXTBDINFO
  static int setup_board_extra(void)
  {
  	bd_t *bd = gd->bd;
  
  	strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
  	strncpy((char *) bd->bi_r_version, U_BOOT_VERSION,
  		sizeof(bd->bi_r_version));
  
  	bd->bi_procfreq = gd->cpu_clk;	/* Processor Speed, In Hz */
  	bd->bi_plb_busfreq = gd->bus_clk;
  #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
  		defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
  		defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
  	bd->bi_pci_busfreq = get_PCI_freq();
  	bd->bi_opbfreq = get_OPB_freq();
  #elif defined(CONFIG_XILINX_405)
  	bd->bi_pci_busfreq = get_PCI_freq();
  #endif
  
  	return 0;
  }
  #endif

  #ifdef CONFIG_POST
  static int init_post(void)
  {
  	post_bootmode_init();
  	post_run(NULL, POST_ROM | post_bootmode_get(0));
  
  	return 0;
  }
  #endif
  
  static int setup_baud_rate(void)
  {
  	/* Ick, can we get rid of this line? */
  	gd->bd->bi_baudrate = gd->baudrate;
  
  	return 0;
  }
  
  static int setup_dram_config(void)
  {
  	/* Ram is board specific, so move it to board code ... */
  	dram_init_banksize();
  
  	return 0;
  }
  
  static int reloc_fdt(void)
  {
  	if (gd->new_fdt) {
  		memcpy(gd->new_fdt, gd->fdt_blob, gd->fdt_size);
  		gd->fdt_blob = gd->new_fdt;
  	}
  
  	return 0;
  }
  
  static int setup_reloc(void)
  {

  	gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;

  	memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
  
  	debug("Relocation Offset is: %08lx
  ", gd->reloc_off);

  	debug("Relocating to %08lx, new gd at %08lx, sp at %08lx
  ",

  	      gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd),
  	      gd->start_addr_sp);

  
  	return 0;
  }
  
  /* ARM calls relocate_code from its crt0.S */

  #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)

  
  static int jump_to_copy(void)
  {

  	/*
  	 * x86 is special, but in a nice way. It uses a trampoline which
  	 * enables the dcache if possible.
  	 *
  	 * For now, other archs use relocate_code(), which is implemented
  	 * similarly for all archs. When we do generic relocation, hopefully
  	 * we can make all archs enable the dcache prior to relocation.
  	 */
  #ifdef CONFIG_X86
  	/*
  	 * SDRAM and console are now initialised. The final stack can now
  	 * be setup in SDRAM. Code execution will continue in Flash, but
  	 * with the stack in SDRAM and Global Data in temporary memory
  	 * (CPU cache)
  	 */
  	board_init_f_r_trampoline(gd->start_addr_sp);
  #else

  	relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);

  #endif

  
  	return 0;
  }
  #endif
  
  /* Record the board_init_f() bootstage (after arch_cpu_init()) */
  static int mark_bootstage(void)
  {
  	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
  
  	return 0;
  }
  
  static init_fnc_t init_sequence_f[] = {

  #ifdef CONFIG_SANDBOX
  	setup_ram_buf,
  #endif

  	setup_mon_len,

  	setup_fdt,
  	trace_early_init,

  #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
  	/* TODO: can this go into arch_cpu_init()? */
  	probecpu,
  #endif

  	arch_cpu_init,		/* basic arch cpu dependent setup */

  #ifdef CONFIG_X86
  	cpu_init_f,		/* TODO(sjg@chromium.org): remove */
  # ifdef CONFIG_OF_CONTROL
  	find_fdt,		/* TODO(sjg@chromium.org): remove */
  # endif
  #endif

  	mark_bootstage,
  #ifdef CONFIG_OF_CONTROL
  	fdtdec_check_fdt,
  #endif
  #if defined(CONFIG_BOARD_EARLY_INIT_F)
  	board_early_init_f,
  #endif

  	/* TODO: can any of this go into arch_cpu_init()? */
  #if defined(CONFIG_PPC) && !defined(CONFIG_8xx_CPUCLK_DEFAULT)
  	get_clocks,		/* get CPU and bus clocks (etc.) */
  #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
  		&& !defined(CONFIG_TQM885D)
  	adjust_sdram_tbs_8xx,
  #endif
  	/* TODO: can we rename this to timer_init()? */
  	init_timebase,
  #endif

  #ifdef CONFIG_ARM

  	timer_init,		/* initialize timer */

  #endif

  #ifdef CONFIG_SYS_ALLOC_DPRAM
  #if !defined(CONFIG_CPM2)
  	dpram_init,
  #endif
  #endif
  #if defined(CONFIG_BOARD_POSTCLK_INIT)
  	board_postclk_init,
  #endif

  #ifdef CONFIG_FSL_ESDHC
  	get_clocks,
  #endif

  	env_init,		/* initialize environment */

  #if defined(CONFIG_8xx_CPUCLK_DEFAULT)
  	/* get CPU and bus clocks according to the environment variable */
  	get_clocks_866,
  	/* adjust sdram refresh rate according to the new clock */
  	sdram_adjust_866,
  	init_timebase,
  #endif

  	init_baud_rate,		/* initialze baudrate settings */
  	serial_init,		/* serial communications setup */
  	console_init_f,		/* stage 1 init of console */

  #ifdef CONFIG_SANDBOX
  	sandbox_early_getopt_check,
  #endif
  #ifdef CONFIG_OF_CONTROL
  	fdtdec_prepare_fdt,

  #endif

  	display_options,	/* say that we are here */
  	display_text_info,	/* show debugging info if required */

  #if defined(CONFIG_8260)
  	prt_8260_rsr,
  	prt_8260_clks,
  #endif /* CONFIG_8260 */
  #if defined(CONFIG_MPC83xx)
  	prt_83xx_rsr,
  #endif
  #ifdef CONFIG_PPC
  	checkcpu,
  #endif

  #if defined(CONFIG_DISPLAY_CPUINFO)
  	print_cpuinfo,		/* display cpu info (and speed) */
  #endif

  #if defined(CONFIG_MPC5xxx)
  	prt_mpc5xxx_clks,
  #endif /* CONFIG_MPC5xxx */

  #if defined(CONFIG_DISPLAY_BOARDINFO)
  	checkboard,		/* display board info */
  #endif

  	INIT_FUNC_WATCHDOG_INIT
  #if defined(CONFIG_MISC_INIT_F)
  	misc_init_f,
  #endif
  	INIT_FUNC_WATCHDOG_RESET

  #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)

  	init_func_i2c,
  #endif
  #if defined(CONFIG_HARD_SPI)
  	init_func_spi,
  #endif
  #ifdef CONFIG_X86
  	dram_init_f,		/* configure available RAM banks */

  	calculate_relocation_address,

  #endif

  	announce_dram_init,
  	/* TODO: unify all these dram functions? */
  #ifdef CONFIG_ARM
  	dram_init,		/* configure available RAM banks */
  #endif

  #ifdef CONFIG_PPC
  	init_func_ram,
  #endif
  #ifdef CONFIG_POST
  	post_init_f,
  #endif
  	INIT_FUNC_WATCHDOG_RESET
  #if defined(CONFIG_SYS_DRAM_TEST)
  	testdram,
  #endif /* CONFIG_SYS_DRAM_TEST */
  	INIT_FUNC_WATCHDOG_RESET

  #ifdef CONFIG_POST
  	init_post,
  #endif

  	INIT_FUNC_WATCHDOG_RESET

  	/*
  	 * Now that we have DRAM mapped and working, we can
  	 * relocate the code and continue running from DRAM.
  	 *
  	 * Reserve memory at end of RAM for (top down in that order):
  	 *  - area that won't get touched by U-Boot and Linux (optional)
  	 *  - kernel log buffer
  	 *  - protected RAM
  	 *  - LCD framebuffer
  	 *  - monitor code
  	 *  - board info struct
  	 */
  	setup_dest_addr,
  #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
  	reserve_logbuffer,
  #endif
  #ifdef CONFIG_PRAM
  	reserve_pram,
  #endif
  	reserve_round_4k,
  #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
  		defined(CONFIG_ARM)
  	reserve_mmu,
  #endif
  #ifdef CONFIG_LCD
  	reserve_lcd,
  #endif

  	reserve_trace,

  	/* TODO: Why the dependency on CONFIG_8xx? */
  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \

  		&& !defined(CONFIG_ARM) && !defined(CONFIG_X86)

  	reserve_video,
  #endif

  	reserve_uboot,

  #ifndef CONFIG_SPL_BUILD

  	reserve_malloc,
  	reserve_board,

  #endif

  	setup_machine,
  	reserve_global_data,
  	reserve_fdt,
  	reserve_stacks,
  	setup_dram_config,
  	show_dram_config,

  #ifdef CONFIG_PPC
  	setup_board_part1,
  	INIT_FUNC_WATCHDOG_RESET
  	setup_board_part2,
  #endif

  	setup_baud_rate,
  	display_new_sp,

  #ifdef CONFIG_SYS_EXTBDINFO
  	setup_board_extra,
  #endif
  	INIT_FUNC_WATCHDOG_RESET

  	reloc_fdt,
  	setup_reloc,

  #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)

  	jump_to_copy,
  #endif
  	NULL,
  };
  
  void board_init_f(ulong boot_flags)
  {

  #ifndef CONFIG_X86

  	gd_t data;
  
  	gd = &data;

  #endif

  	/*
  	 * Clear global data before it is accessed at debug print
  	 * in initcall_run_list. Otherwise the debug print probably
  	 * get the wrong vaule of gd->have_console.
  	 */
  #if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
  		!defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
  		!defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
  	zero_global_data();
  #endif

  	gd->flags = boot_flags;

  	gd->have_console = 0;

  
  	if (initcall_run_list(init_sequence_f))
  		hang();

  #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)

  	/* NOTREACHED - jump_to_copy() does not return */
  	hang();
  #endif
  }

  #ifdef CONFIG_X86
  /*
   * For now this code is only used on x86.
   *
   * init_sequence_f_r is the list of init functions which are run when
   * U-Boot is executing from Flash with a semi-limited 'C' environment.
   * The following limitations must be considered when implementing an
   * '_f_r' function:
   *  - 'static' variables are read-only
   *  - Global Data (gd->xxx) is read/write
   *
   * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
   * supported).  It _should_, if possible, copy global data to RAM and
   * initialise the CPU caches (to speed up the relocation process)
   *
   * NOTE: At present only x86 uses this route, but it is intended that
   * all archs will move to this when generic relocation is implemented.
   */
  static init_fnc_t init_sequence_f_r[] = {
  	init_cache_f_r,
  	copy_uboot_to_ram,
  	clear_bss,
  	do_elf_reloc_fixups,
  
  	NULL,
  };
  
  void board_init_f_r(void)
  {
  	if (initcall_run_list(init_sequence_f_r))
  		hang();
  
  	/*
  	 * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
  	 * Transfer execution from Flash to RAM by calculating the address
  	 * of the in-RAM copy of board_init_r() and calling it
  	 */
  	(board_init_r + gd->reloc_off)(gd, gd->relocaddr);
  
  	/* NOTREACHED - board_init_r() does not return */
  	hang();
  }
  #endif /* CONFIG_X86 */