Blame view
arch/arm/dts/meson-gxbb-nanopi-k2.dts
7.85 KB
9c7ad1ed0 ARM: dts: sync me... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber */ /dts-v1/; #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb"; aliases { serial0 = &uart_AO; ethernet0 = ðmac; }; chosen { stdout-path = "serial0:115200n8"; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; leds { compatible = "gpio-leds"; stat { label = "nanopi-k2:blue:stat"; gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; default-state = "on"; panic-indicator; }; }; vdd_5v: regulator-vdd-5v { compatible = "regulator-fixed"; regulator-name = "VDD_5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; vddio_ao3v3: regulator-vddio-ao3v3 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; vddio_tf: regulator-vddio-tf { compatible = "regulator-gpio"; regulator-name = "VDDIO_TF"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; gpios-states = <0>; states = <3300000 0>, <1800000 1>; regulator-settling-time-up-us = <100>; regulator-settling-time-down-us = <5000>; }; wifi_32k: wifi-32k { compatible = "pwm-clock"; #clock-cells = <0>; clock-frequency = <32768>; pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; clocks = <&wifi_32k>; clock-names = "ext_clock"; }; vcc1v8: regulator-vcc1v8 { compatible = "regulator-fixed"; regulator-name = "VCC1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; vcc3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; |
8973d8165 ARM: meson: Add r... |
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 |
/* CVBS is available on CON1 pin 36, disabled by default */ cvbs-connector { compatible = "composite-video-connector"; status = "disabled"; port { cvbs_connector_in: endpoint { remote-endpoint = <&cvbs_vdac_out>; }; }; }; hdmi-connector { compatible = "hdmi-connector"; type = "a"; port { hdmi_connector_in: endpoint { remote-endpoint = <&hdmi_tx_tmds_out>; }; }; }; }; &cec_AO { status = "okay"; pinctrl-0 = <&ao_cec_pins>; pinctrl-names = "default"; hdmi-phandle = <&hdmi_tx>; }; &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; |
9c7ad1ed0 ARM: dts: sync me... |
145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 |
}; ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; phy-handle = <ð_phy0>; phy-mode = "rgmii"; amlogic,tx-delay-ns = <2>; snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; |
8973d8165 ARM: meson: Add r... |
175 176 177 178 179 180 181 182 183 184 185 |
&hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; }; &hdmi_tx_tmds_port { hdmi_tx_tmds_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; |
9c7ad1ed0 ARM: dts: sync me... |
186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 |
&ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; &pinctrl_aobus { gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In", "VCCK En", "CON1 Header Pin31", "I2S Header Pin6", "IR In", "I2S Header Pin7", "I2S Header Pin3", "I2S Header Pin4", "I2S Header Pin5", "HDMI CEC", "SYS LED", /* GPIO_TEST_N */ ""; }; &pinctrl_periphs { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En", "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3", "Eth PHY nRESET", "Eth PHY Intc", /* Bank GPIOH */ "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "CON1 Header Pin33", /* Bank BOOT */ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk", "eMMC Reset", "eMMC CMD", "", "", "", "", "eMMC DS", "", "", /* Bank CARD */ "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", "SDCard D3", "SDCard D2", "SDCard Det", /* Bank GPIODV */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", "VDDEE Regulator", "VCCK Regulator", /* Bank GPIOY */ "CON1 Header Pin7", "CON1 Header Pin11", "CON1 Header Pin13", "CON1 Header Pin15", "CON1 Header Pin18", "CON1 Header Pin19", "CON1 Header Pin22", "CON1 Header Pin21", "CON1 Header Pin24", "CON1 Header Pin23", "CON1 Header Pin26", "CON1 Header Pin29", "CON1 Header Pin32", "CON1 Header Pin8", "CON1 Header Pin10", "CON1 Header Pin16", "CON1 Header Pin12", /* Bank GPIOX */ "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", "WIFI Power Enable", "WIFI WAKE HOST", "Bluetooth PCM DOUT", "Bluetooth PCM DIN", "Bluetooth PCM SYNC", "Bluetooth PCM CLK", "Bluetooth UART TX", "Bluetooth UART RX", "Bluetooth UART CTS", "Bluetooth UART RTS", "", "", "", "WIFI 32K", "Bluetooth Enable", "Bluetooth WAKE HOST", "", /* Bank GPIOCLK */ "", "CON1 Header Pin35", "", ""; }; &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; pinctrl-names = "default"; clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; &saradc { status = "okay"; vref-supply = <&vddio_ao18>; }; /* SDIO */ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>; pinctrl-1 = <&sdio_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; bus-width = <4>; cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddio_ao3v3>; vqmmc-supply = <&vddio_ao18>; brcmf: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; }; }; /* SD */ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; pinctrl-1 = <&sdcard_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; max-frequency = <200000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; cd-inverted; vmmc-supply = <&vddio_ao3v3>; vqmmc-supply = <&vddio_tf>; }; /* eMMC */ &sd_emmc_c { status = "disabled"; pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <8>; max-frequency = <200000000>; non-removable; disable-wp; cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc3v3>; vqmmc-supply = <&vcc1v8>; }; /* DBG_UART */ &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; /* Bluetooth on AP6212 */ &uart_A { status = "disabled"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; }; /* 40-pin CON1 */ &uart_C { status = "disabled"; pinctrl-0 = <&uart_c_pins>; pinctrl-names = "default"; }; &usb0_phy { status = "okay"; phy-supply = <&vdd_5v>; }; &usb1_phy { status = "okay"; }; &usb0 { status = "okay"; }; &usb1 { status = "okay"; }; |