/*
   * Copyright 2015 Aleksei Mamlin
   * Aleksei Mamlin <mamlinav@gmail.com>
   *
   * This file is dual-licensed: you can use it either under the terms
   * of the GPL or the X11 license, at your option. Note that this dual
   * licensing only applies to this file, and not this project as a
   * whole.
   *
   *  a) This file is free software; you can redistribute it and/or
   *     modify it under the terms of the GNU General Public License as
   *     published by the Free Software Foundation; either version 2 of the
   *     License, or (at your option) any later version.
   *
   *     This file is distributed in the hope that it will be useful,
   *     but WITHOUT ANY WARRANTY; without even the implied warranty of
   *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   *     GNU General Public License for more details.
   *

   * Or, alternatively,
   *
   *  b) Permission is hereby granted, free of charge, to any person
   *     obtaining a copy of this software and associated documentation
   *     files (the "Software"), to deal in the Software without
   *     restriction, including without limitation the rights to use,
   *     copy, modify, merge, publish, distribute, sublicense, and/or
   *     sell copies of the Software, and to permit persons to whom the
   *     Software is furnished to do so, subject to the following
   *     conditions:
   *
   *     The above copyright notice and this permission notice shall be
   *     included in all copies or substantial portions of the Software.
   *
   *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
   *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
   *     OTHER DEALINGS IN THE SOFTWARE.
   */
  
  /dts-v1/;
  #include "sun4i-a10.dtsi"
  #include "sunxi-common-regulators.dtsi"
  
  #include <dt-bindings/gpio/gpio.h>

  
  / {
  	model = "HAOYU Electronics Marsboard A10";
  	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
  
  	aliases {
  		serial0 = &uart0;
  	};
  
  	chosen {
  		stdout-path = "serial0:115200n8";
  	};
  
  	leds {
  		compatible = "gpio-leds";

  
  		red1 {
  			label = "marsboard:red1:usr";
  			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
  		};
  
  		red2 {
  			label = "marsboard:red2:usr";
  			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
  		};
  
  		red3 {
  			label = "marsboard:red3:usr";
  			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
  		};
  
  		red4 {
  			label = "marsboard:red4:usr";
  			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
  		};
  	};
  };
  
  &ahci {
  	status = "okay";
  };

  &codec {
  	status = "okay";
  };

  &ehci0 {
  	status = "okay";
  };
  
  &ehci1 {
  	status = "okay";
  };

  &emac_sram {
  	status = "okay";
  };

  &emac {

  	phy = <&phy1>;
  	status = "okay";
  };
  
  &i2c0 {

  	status = "okay";
  };
  
  &i2c1 {

  	status = "okay";
  };
  
  &i2c2 {

  	status = "okay";
  };
  
  &mdio {
  	status = "okay";
  
  	phy1: ethernet-phy@1 {
  		reg = <1>;
  	};
  };
  
  &mmc0 {

  	vmmc-supply = <&reg_vcc3v3>;
  	bus-width = <4>;

  	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */

  	status = "okay";
  };
  
  &ohci0 {
  	status = "okay";
  };
  
  &ohci1 {
  	status = "okay";
  };

  &otg_sram {
  	status = "okay";
  };

  &pio {

  	usb0_id_detect_pin: usb0-id-detect-pin {
  		pins = "PH4";
  		function = "gpio_in";
  		bias-pull-up;

  	};

  };
  
  &reg_usb1_vbus {
  	status = "okay";
  };
  
  &reg_usb2_vbus {
  	status = "okay";
  };
  
  &spi0 {
  	pinctrl-names = "default";

  	pinctrl-0 = <&spi0_pi_pins>,
  		    <&spi0_cs0_pi_pin>;

  	status = "okay";
  };
  
  &uart0 {
  	pinctrl-names = "default";

  	pinctrl-0 = <&uart0_pb_pins>;

  	status = "okay";
  };

  &usb_otg {
  	dr_mode = "otg";
  	status = "okay";
  };

  &usbphy {

  	pinctrl-names = "default";
  	pinctrl-0 = <&usb0_id_detect_pin>;
  	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */

  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
  };