CONFIG_ARM=y
  CONFIG_ARCH_AT91=y
  CONFIG_SYS_TEXT_BASE=0x23f00000
  CONFIG_TARGET_SAM9X60EK=y
  CONFIG_SYS_MALLOC_F_LEN=0x2000

  CONFIG_ENV_SECT_SIZE=0x1000
  CONFIG_DM_GPIO=y

  CONFIG_NR_DRAM_BANKS=8
  CONFIG_DEBUG_UART_BOARD_INIT=y
  CONFIG_DEBUG_UART_BASE=0xfffff200
  CONFIG_DEBUG_UART_CLOCK=200000000

  CONFIG_DEBUG_UART=y
  CONFIG_ENV_VARS_UBOOT_CONFIG=y
  CONFIG_FIT=y
  CONFIG_QSPI_BOOT=y
  CONFIG_BOOTDELAY=3
  CONFIG_USE_BOOTARGS=y
  CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
  CONFIG_SYS_CONSOLE_IS_IN_ENV=y

  CONFIG_MISC_INIT_R=y

  # CONFIG_DISPLAY_BOARDINFO is not set
  CONFIG_HUSH_PARSER=y
  CONFIG_SYS_PROMPT="U-Boot> "
  CONFIG_CMD_BOOTZ=y

  CONFIG_CMD_DM=y

  # CONFIG_CMD_FLASH is not set

  CONFIG_CMD_I2C=y

  CONFIG_CMD_MMC=y
  CONFIG_CMD_NAND=y
  CONFIG_CMD_NAND_TRIMFFS=y

  # CONFIG_CMD_SETEXPR is not set
  CONFIG_CMD_DHCP=y
  CONFIG_CMD_MII=y
  CONFIG_CMD_PING=y
  CONFIG_CMD_FAT=y
  CONFIG_CMD_UBI=y
  CONFIG_OF_CONTROL=y
  CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
  CONFIG_ENV_IS_IN_SPI_FLASH=y
  CONFIG_USE_ENV_SPI_BUS=y
  CONFIG_ENV_SPI_BUS=0
  CONFIG_USE_ENV_SPI_CS=y
  CONFIG_ENV_SPI_CS=0
  CONFIG_USE_ENV_SPI_MAX_HZ=y
  CONFIG_ENV_SPI_MAX_HZ=50000000
  CONFIG_USE_ENV_SPI_MODE=y
  CONFIG_ENV_SPI_MODE=0x0

  CONFIG_SYS_RELOC_GD_ENV_ADDR=y

  CONFIG_DM=y
  CONFIG_CLK=y
  CONFIG_CLK_AT91=y
  CONFIG_AT91_GENERIC_CLK=y

  CONFIG_AT91_GPIO=y

  CONFIG_DM_I2C=y
  CONFIG_SYS_I2C_AT91=y
  CONFIG_I2C_EEPROM=y
  CONFIG_MICROCHIP_FLEXCOM=y

  CONFIG_DM_MMC=y
  CONFIG_GENERIC_ATMEL_MCI=y

  CONFIG_MTD=y

  CONFIG_DM_MTD=y

  CONFIG_MTD_RAW_NAND=y

  CONFIG_DM_SPI_FLASH=y

  CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_SPI_FLASH_SPANSION=y
  CONFIG_SPI_FLASH_STMICRO=y
  CONFIG_SPI_FLASH_SST=y
  CONFIG_SPI_FLASH_MTD=y
  CONFIG_PHY_MICREL=y
  CONFIG_DM_ETH=y
  CONFIG_MACB=y
  CONFIG_PINCTRL=y
  CONFIG_PINCTRL_AT91=y
  CONFIG_DM_SERIAL=y
  CONFIG_DEBUG_UART_ATMEL=y
  CONFIG_DEBUG_UART_ANNOUNCE=y
  CONFIG_ATMEL_USART=y
  CONFIG_SPI=y
  CONFIG_DM_SPI=y
  CONFIG_ATMEL_QSPI=y
  CONFIG_TIMER=y
  CONFIG_ATMEL_PIT_TIMER=y

  CONFIG_W1=y
  CONFIG_W1_GPIO=y
  CONFIG_W1_EEPROM=y
  CONFIG_W1_EEPROM_DS24XXX=y

  CONFIG_OF_LIBFDT_OVERLAY=y