/* SPDX-License-Identifier: GPL-2.0+ */

  /*
   * Copyright (C) Stefano Babic <sbabic@denx.de>
   *
   * Configuration settings for the E+L i.MX6Q DO82 board.

   */
  
  #ifndef __EL6Q_COMMON_CONFIG_H
  #define __EL6Q_COMMON_CONFIG_H
  
  #define CONFIG_BOARD_NAME		EL6Q

  #include "mx6_common.h"
  
  #define CONFIG_IMX_THERMAL
  
  /* Size of malloc() pool */
  #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

  #define CONFIG_MXC_UART
  
  #ifdef CONFIG_SPL

  #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)

  #include "imx6_spl.h"
  #endif
  
  /* MMC Configs */
  #define CONFIG_SYS_FSL_ESDHC_ADDR	0
  #define CONFIG_SYS_FSL_USDHC_NUM	2
  
  /* I2C config */
  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_MXC
  #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
  #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
  #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
  #define CONFIG_SYS_I2C_SPEED			100000
  
  /* PMIC */
  #define CONFIG_POWER
  #define CONFIG_POWER_I2C
  #define CONFIG_POWER_PFUZE100
  #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
  
  /* Commands */

  
  /* allow to overwrite serial and ethaddr */
  #define CONFIG_ENV_OVERWRITE
  #define CONFIG_MXC_UART_BASE	UART2_BASE

  #define CONFIG_BOARD_NAME	EL6Q

  #define CONFIG_EXTRA_ENV_SETTINGS                                               \
  	"board="__stringify(CONFIG_BOARD_NAME)"\0"                              \
  	"cma_size="__stringify(EL6Q_CMA_SIZE)"\0"                               \
  	"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0"                     \

  	"console=" CONSOLE_DEV "\0"					\

  	"fdtfile=undefined\0" \
  	"fdt_high=0xffffffff\0" \
  	"fdt_addr_r=0x18000000\0" \
  	"fdt_addr=0x18000000\0" \
  	"findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0"                  \
  	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  	BOOTENV
  
  #define BOOT_TARGET_DEVICES(func) \
  	func(MMC, mmc, 0) \
  	func(MMC, mmc, 1) \
  	func(PXE, PXE, na) \
  	func(DHCP, dhcp, na)

  #include <config_distro_bootcmd.h>
  
  #define CONFIG_ARP_TIMEOUT     200UL

  #define CONFIG_SYS_MEMTEST_START       0x10000000
  #define CONFIG_SYS_MEMTEST_END         0x10800000
  #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

  /* Physical Memory Map */

  #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
  
  #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
  #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  
  #define CONFIG_SYS_INIT_SP_OFFSET \
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR \
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

  /* environment organization */

  
  #define CONFIG_ENV_SIZE			(8 * 1024)

  #if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_SYS_MMC_ENV_DEV		1
  #define CONFIG_SYS_MMC_ENV_PART		2
  #define CONFIG_ENV_OFFSET		0x0
  #endif
  
  #endif                         /* __EL6Q_COMMON_CONFIG_H */