/* SPDX-License-Identifier: GPL-2.0+ */

  /*
   * (C) Copyright 2001
   * Wolfgang Denk, DENX Software Engineering, wd@denx.de.

   */
  
  /*
   * Generic RTC interface.
   */
  #ifndef _RTC_H_
  #define _RTC_H_

  /* bcd<->bin functions are needed by almost all the RTC drivers, let's include
   * it there instead of in evey single driver */
  
  #include <bcd.h>

  #include <rtc_def.h>

  #ifdef CONFIG_DM_RTC
  
  struct rtc_ops {
  	/**
  	 * get() - get the current time
  	 *
  	 * Returns the current time read from the RTC device. The driver
  	 * is responsible for setting up every field in the structure.
  	 *
  	 * @dev:	Device to read from
  	 * @time:	Place to put the time that is read
  	 */
  	int (*get)(struct udevice *dev, struct rtc_time *time);
  
  	/**
  	 * set() - set the current time
  	 *
  	 * Sets the time in the RTC device. The driver can expect every
  	 * field to be set correctly.
  	 *
  	 * @dev:	Device to read from
  	 * @time:	Time to write
  	 */
  	int (*set)(struct udevice *dev, const struct rtc_time *time);
  
  	/**
  	 * reset() - reset the RTC to a known-good state
  	 *
  	 * This function resets the RTC to a known-good state. The time may
  	 * be unset by this method, so should be set after this method is
  	 * called.
  	 *
  	 * @dev:	Device to read from
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*reset)(struct udevice *dev);
  
  	/**
  	 * read8() - Read an 8-bit register
  	 *
  	 * @dev:	Device to read from
  	 * @reg:	Register to read
  	 * @return value read, or -ve on error
  	 */
  	int (*read8)(struct udevice *dev, unsigned int reg);
  
  	/**
  	* write8() - Write an 8-bit register
  	*
  	* @dev:		Device to write to
  	* @reg:		Register to write
  	* @value:	Value to write
  	* @return 0 if OK, -ve on error
  	*/
  	int (*write8)(struct udevice *dev, unsigned int reg, int val);
  };
  
  /* Access the operations for an RTC device */
  #define rtc_get_ops(dev)	((struct rtc_ops *)(dev)->driver->ops)
  
  /**
   * dm_rtc_get() - Read the time from an RTC
   *
   * @dev:	Device to read from
   * @time:	Place to put the current time
   * @return 0 if OK, -ve on error
   */
  int dm_rtc_get(struct udevice *dev, struct rtc_time *time);
  
  /**

   * dm_rtc_set() - Write a time to an RTC

   *
   * @dev:	Device to read from
   * @time:	Time to write into the RTC
   * @return 0 if OK, -ve on error
   */
  int dm_rtc_set(struct udevice *dev, struct rtc_time *time);
  
  /**
   * dm_rtc_reset() - reset the RTC to a known-good state
   *
   * If the RTC appears to be broken (e.g. it is not counting up in seconds)
   * it may need to be reset to a known good state. This function achieves this.
   * After resetting the RTC the time should then be set to a known value by
   * the caller.
   *
   * @dev:	Device to read from
   * @return 0 if OK, -ve on error
   */
  int dm_rtc_reset(struct udevice *dev);
  
  /**
   * rtc_read8() - Read an 8-bit register
   *
   * @dev:	Device to read from
   * @reg:	Register to read
   * @return value read, or -ve on error
   */
  int rtc_read8(struct udevice *dev, unsigned int reg);
  
  /**
   * rtc_write8() - Write an 8-bit register
   *
   * @dev:	Device to write to
   * @reg:	Register to write
   * @value:	Value to write
   * @return 0 if OK, -ve on error
   */
  int rtc_write8(struct udevice *dev, unsigned int reg, int val);
  
  /**

   * rtc_read16() - Read a 16-bit value from the RTC
   *
   * @dev:	Device to read from
   * @reg:	Offset to start reading from
   * @valuep:	Place to put the value that is read
   * @return 0 if OK, -ve on error
   */
  int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep);
  
  /**
   * rtc_write16() - Write a 16-bit value to the RTC
   *
   * @dev:	Device to write to
   * @reg:	Register to start writing to
   * @value:	Value to write
   * @return 0 if OK, -ve on error
   */
  int rtc_write16(struct udevice *dev, unsigned int reg, u16 value);
  
  /**

   * rtc_read32() - Read a 32-bit value from the RTC
   *
   * @dev:	Device to read from
   * @reg:	Offset to start reading from
   * @valuep:	Place to put the value that is read
   * @return 0 if OK, -ve on error
   */
  int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep);
  
  /**
   * rtc_write32() - Write a 32-bit value to the RTC
   *
   * @dev:	Device to write to
   * @reg:	Register to start writing to
   * @value:	Value to write
   * @return 0 if OK, -ve on error
   */
  int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);
  
  #else

  int rtc_get (struct rtc_time *);

  int rtc_set (struct rtc_time *);

  void rtc_reset (void);

  void rtc_enable_32khz_output(void);

  /**

   * rtc_read8() - Read an 8-bit register
   *
   * @reg:	Register to read
   * @return value read
   */
  int rtc_read8(int reg);
  
  /**
   * rtc_write8() - Write an 8-bit register
   *
   * @reg:	Register to write
   * @value:	Value to write
   */
  void rtc_write8(int reg, uchar val);
  
  /**
   * rtc_read32() - Read a 32-bit value from the RTC
   *
   * @reg:	Offset to start reading from
   * @return value read
   */
  u32 rtc_read32(int reg);
  
  /**
   * rtc_write32() - Write a 32-bit value to the RTC
   *
   * @reg:	Register to start writing to
   * @value:	Value to write
   */
  void rtc_write32(int reg, u32 value);
  
  /**

   * rtc_init() - Set up the real time clock ready for use
   */
  void rtc_init(void);

  #endif /* CONFIG_DM_RTC */
  
  /**
   * is_leap_year - Check if year is a leap year
   *
   * @year	Year
   * @return	1 if leap year
   */
  static inline bool is_leap_year(unsigned int year)
  {
  	return (!(year % 4) && (year % 100)) || !(year % 400);
  }

  /**
   * rtc_calc_weekday() - Work out the weekday from a time
   *
   * This only works for the Gregorian calendar - i.e. after 1752 (in the UK).
   * It sets time->tm_wdaay to the correct day of the week.
   *
   * @time:	Time to inspect. tm_wday is updated
   * @return 0 if OK, -EINVAL if the weekday could not be determined
   */
  int rtc_calc_weekday(struct rtc_time *time);

  /**
   * rtc_to_tm() - Convert a time_t value into a broken-out time
   *
   * The following fields are set up by this function:
   *	tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year, tm_wday
   *
   * Note that tm_yday and tm_isdst are set to 0.
   *
   * @time_t:	Number of seconds since 1970-01-01 00:00:00
   * @time:	Place to put the broken-out time

   */

  void rtc_to_tm(u64 time_t, struct rtc_time *time);

  /**
   * rtc_mktime() - Convert a broken-out time into a time_t value
   *
   * The following fields need to be valid for this function to work:
   *	tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year
   *
   * Note that tm_wday and tm_yday are ignored.
   *
   * @time:	Broken-out time to convert
   * @return corresponding time_t value, seconds since 1970-01-01 00:00:00
   */
  unsigned long rtc_mktime(const struct rtc_time *time);

  #endif	/* _RTC_H_ */