/*
   * Copyright (C) 2013 Samsung Electronics
   * Hyungwon Hwang <human.hwang@samsung.com>
   *
   * SPDX-License-Identifier:     GPL-2.0+
   */
  
  #ifndef __CONFIG_ODROID_XU3_H
  #define __CONFIG_ODROID_XU3_H
  
  #include "exynos5420-common.h"

  #include <configs/exynos5-common.h>

  #define CONFIG_BOARD_COMMON
  
  #define CONFIG_SYS_SDRAM_BASE		0x40000000
  #define CONFIG_SYS_TEXT_BASE		0x43E00000
  
  /* select serial console configuration */
  #define CONFIG_SERIAL2			/* use SERIAL 2 */
  
  #define TZPC_BASE_OFFSET		0x10000

  #define CONFIG_NR_DRAM_BANKS	8

  #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */

  /* Reserve the last 22 MiB for the secure firmware */
  #define CONFIG_SYS_MEM_TOP_HIDE		(22UL << 20UL)
  #define CONFIG_TZSW_RESERVED_DRAM_SIZE	CONFIG_SYS_MEM_TOP_HIDE

  #undef CONFIG_ENV_SIZE
  #undef CONFIG_ENV_OFFSET

  #define CONFIG_ENV_SIZE			(SZ_1K * 16)
  #define CONFIG_ENV_OFFSET		(SZ_1K * 3136) /* ~3 MiB offset */

  
  #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)

  #define CONFIG_DEFAULT_CONSOLE		"ttySAC2,115200n8"

  /* USB */

  #define CONFIG_USB_EHCI_EXYNOS

  /* DFU */

  #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_32M
  #define DFU_DEFAULT_POLL_TIMEOUT	300

  #define DFU_MANIFEST_POLL_TIMEOUT       25000

  
  /* THOR */

  #define CONFIG_G_DNL_THOR_VENDOR_NUM	CONFIG_USB_GADGET_VENDOR_NUM

  #define CONFIG_G_DNL_THOR_PRODUCT_NUM	0x685D

  
  /* UMS */
  #define CONFIG_G_DNL_UMS_VENDOR_NUM	0x0525
  #define CONFIG_G_DNL_UMS_PRODUCT_NUM	0xA4A5

  /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
  #undef CONFIG_EXYNOS_TMU

  #define CONFIG_DFU_ALT_SYSTEM               \
  	"uImage fat 0 1;"                   \
  	"zImage fat 0 1;"                   \
  	"Image.itb fat 0 1;"                \
  	"uInitrd fat 0 1;"                  \
  	"boot.scr fat 0 1;"                 \
  	"boot.cmd fat 0 1;"                 \
  	"exynos5422-odroidxu3.dtb fat 0 1;" \

  	"exynos5422-odroidxu3-lite.dtb fat 0 1;" \
  	"exynos5422-odroidxu4.dtb fat 0 1;" \

  	"boot part 0 1;"                    \
  	"root part 0 2\0"
  
  #define CONFIG_DFU_ALT_BOOT_EMMC           \
  	"u-boot raw 0x3e 0x800 mmcpart 1;" \
  	"bl1 raw 0x0 0x1e mmcpart 1;"      \
  	"bl2 raw 0x1e 0x1d mmcpart 1;"     \
  	"tzsw raw 0x83e 0x200 mmcpart 1;"  \
  	"params.bin raw 0x1880 0x20\0"
  
  #define CONFIG_DFU_ALT_BOOT_SD   \
  	"u-boot raw 0x3f 0x800;" \
  	"bl1 raw 0x1 0x1e;"      \
  	"bl2 raw 0x1f 0x1d;"     \
  	"tzsw raw 0x83f 0x200;"  \
  	"params.bin raw 0x1880 0x20\0"
  
  /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
  #define CONFIG_MISC_COMMON

  #define CONFIG_MISC_INIT_R

  #define CONFIG_SET_DFU_ALT_INFO
  #define CONFIG_SET_DFU_ALT_BUF_LEN	(SZ_1K)

  /* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
  #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  #define CONFIG_ODROID_REV_AIN			9
  #define CONFIG_REVISION_TAG
  #define CONFIG_BOARD_TYPES
  
  #undef CONFIG_SYS_BOARD
  #define CONFIG_SYS_BOARD	"odroid"

  /* Define new extra env settings, including DFU settings */
  #undef CONFIG_EXTRA_ENV_SETTINGS
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	EXYNOS_DEVICE_SETTINGS \
  	EXYNOS_FDTFILE_SETTING \
  	MEM_LAYOUT_ENV_SETTINGS \
  	BOOTENV \
  	"bootdelay=0\0" \
  	"rootfstype=ext4\0" \

  	"console=" CONFIG_DEFAULT_CONSOLE "\0"\

  	"fdtfile=exynos5422-odroidxu3.dtb\0" \
  	"boardname=odroidxu3\0" \
  	"mmcbootdev=0\0" \
  	"mmcrootdev=0\0" \
  	"mmcbootpart=1\0" \
  	"mmcrootpart=2\0" \
  	"dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
  	"dfu_alt_info=Autoset by THOR/DFU command run.\0"

  #endif	/* __CONFIG_H */