/*
   * Copyright (C) 2014 Samsung Electronics
   *
   * Configuration settings for the SAMSUNG EXYNOS5 board.
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */

  #ifndef __CONFIG_EXYNOS4_COMMON_H
  #define __CONFIG_EXYNOS4_COMMON_H

  #define CONFIG_EXYNOS4			/* Exynos4 Family */

  #include "exynos-common.h"

  #define CONFIG_BOARD_COMMON

  #define CONFIG_REVISION_TAG

  
  /* SD/MMC configuration */

  #define CONFIG_MMC_DEFAULT_DEV	0

  #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
  #define DFU_DEFAULT_POLL_TIMEOUT 300
  
  /* USB Samsung's IDs */

  #define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8

  #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D

  #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
  #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5

  #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

  #define CONFIG_USB_GADGET_DWC2_OTG_PHY

  /* Common environment variables */
  #define CONFIG_EXTRA_ENV_ITB \
  	"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
  		"${kernelname}\0" \
  	"loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
  		"${initrdname}\0" \
  	"loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
  		"${fdtfile}\0" \
  	"check_ramdisk=" \
  		"if run loadinitrd; then " \
  			"setenv initrd_addr ${initrdaddr};" \
  		"else " \
  			"setenv initrd_addr -;" \
  		"fi;\0" \
  	"check_dtb=" \
  		"if run loaddtb; then " \
  			"setenv fdt_addr ${fdtaddr};" \
  		"else " \
  			"setenv fdt_addr;" \
  		"fi;\0" \
  	"kernel_args=" \
  		"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart}" \
  		" ${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};\0" \
  	"boot_fit=" \
  		"setenv kerneladdr 0x42000000;" \
  		"setenv kernelname Image.itb;" \
  		"run loadkernel;" \
  		"run kernel_args;" \
  		"bootm ${kerneladdr}#${board_name}\0" \
  	"boot_uimg=" \
  		"setenv kerneladdr 0x40007FC0;" \
  		"setenv kernelname uImage;" \
  		"run check_dtb;" \
  		"run check_ramdisk;" \
  		"run loadkernel;" \
  		"run kernel_args;" \
  		"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
  	"boot_zimg=" \
  		"setenv kerneladdr 0x40007FC0;" \
  		"setenv kernelname zImage;" \
  		"run check_dtb;" \
  		"run check_ramdisk;" \
  		"run loadkernel;" \
  		"run kernel_args;" \
  		"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
  	"autoboot=" \
  		"if test -e mmc ${mmcdev}:${mmcbootpart} Image.itb; then; " \
  			"run boot_fit;" \
  		"elif test -e mmc ${mmcdev}:${mmcbootpart} zImage; then; " \
  			"run boot_zimg;" \
  		"elif test -e mmc ${mmcdev}:${mmcbootpart} uImage; then; " \
  			"run boot_uimg;" \
  		"fi;\0"

  #endif	/* __CONFIG_EXYNOS4_COMMON_H */