/*
   * (C) Copyright 2012
   * Texas Instruments, <www.ti.com>
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */
  #ifndef	_SPL_H_
  #define	_SPL_H_

  #include <binman_sym.h>

  /* Platform-specific defines */

  #include <linux/compiler.h>

  #include <asm/spl.h>

  /* Value in r0 indicates we booted from U-Boot */
  #define UBOOT_NOT_LOADED_FROM_SPL	0x13578642

  /* Boot type */
  #define MMCSD_MODE_UNDEFINED	0
  #define MMCSD_MODE_RAW		1

  #define MMCSD_MODE_FS		2

  #define MMCSD_MODE_EMMCBOOT	3

  
  struct spl_image_info {
  	const char *name;
  	u8 os;

  	uintptr_t load_addr;
  	uintptr_t entry_point;

  #if CONFIG_IS_ENABLED(LOAD_FIT)
  	void *fdt_addr;
  #endif

  	u32 size;

  	u32 flags;

  	void *arg;

  #ifdef CONFIG_DUAL_BOOTLOADER
  	uint64_t rbindex;
  #endif

  };

  /*
   * Information required to load data from a device
   *
   * @dev: Pointer to the device, e.g. struct mmc *
   * @priv: Private data for the device
   * @bl_len: Block length for reading in bytes

   * @filename: Name of the fit image file.

   * @read: Function to call to read from the device
   */
  struct spl_load_info {
  	void *dev;
  	void *priv;
  	int bl_len;

  	const char *filename;

  	ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
  		      void *buf);
  };

  /*
   * We need to know the position of U-Boot in memory so we can jump to it. We
   * allow any U-Boot binary to be used (u-boot.bin, u-boot-nodtb.bin,
   * u-boot.img), hence the '_any'. These is no checking here that the correct
   * image is found. For * example if u-boot.img is used we don't check that
   * spl_parse_image_header() can parse a valid header.
   */
  binman_sym_extern(ulong, u_boot_any, pos);

  /**
   * spl_load_simple_fit() - Loads a fit image from a device.

   * @spl_image:	Image description to set up

   * @info:	Structure containing the information required to load data.
   * @sector:	Sector number where FIT image is located in the device
   * @fdt:	Pointer to the copied FIT header.
   *
   * Reads the FIT image @sector in the device. Loads u-boot image to
   * specified load address and copies the dtb to end of u-boot image.
   * Returns 0 on success.
   */

  int spl_load_simple_fit(struct spl_image_info *spl_image,
  			struct spl_load_info *info, ulong sector, void *fdt);

  #define SPL_COPY_PAYLOAD_ONLY	1

  #define SPL_FIT_FOUND		2

  /* SPL common functions */
  void preloader_console_init(void);
  u32 spl_boot_device(void);

  u32 spl_boot_mode(const u32 boot_device);

  void spl_set_bd(void);

  
  /**
   * spl_set_header_raw_uboot() - Set up a standard SPL image structure
   *
   * This sets up the given spl_image which the standard values obtained from
   * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START,
   * CONFIG_SYS_TEXT_BASE.
   *

   * @spl_image: Image description to set up

   */
  void spl_set_header_raw_uboot(struct spl_image_info *spl_image);

  
  
  /**
   * spl_set_header_raw_atf() - Set up a standard SPL image structure for ATF
   *
   * This sets up the given spl_image which the standard values obtained from
   * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START,
   * CONFIG_SYS_TEXT_BASE.
   *
   * @spl_image: Image description to set up
   */
  void spl_set_header_raw_atf(struct spl_image_info *spl_image);

  /**
   * spl_parse_image_header() - parse the image header and set up info
   *
   * This parses the legacy image header information at @header and sets up
   * @spl_image according to what is found. If no image header is found, then
   * a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is

   * enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not

   * enabled then U-Boot gives up. Otherwise U-Boot sets up the image using
   * spl_set_header_raw_uboot(), or possibly the bootz header.
   *
   * @spl_image: Image description to set up
   * @header image header to parse
   * @return 0 if a header was correctly parsed, -ve on error
   */
  int spl_parse_image_header(struct spl_image_info *spl_image,
  			   const struct image_header *header);

  void spl_board_prepare_for_linux(void);

  void spl_board_prepare_for_boot(void);

  int spl_board_ubi_load_image(u32 boot_device);

  
  /**
   * jump_to_image_linux() - Jump to a Linux kernel from SPL
   *
   * This jumps into a Linux kernel using the information in @spl_image.
   *
   * @spl_image: Image description to set up

   */

  void __noreturn jump_to_image_linux(struct spl_image_info *spl_image);

  
  /**
   * spl_start_uboot() - Check if SPL should start the kernel or U-Boot
   *
   * This is called by the various SPL loaders to determine whether the board
   * wants to load the kernel or U-Boot. This function should be provided by
   * the board.
   *
   * @return 0 if SPL should start the kernel, 1 if U-Boot must be started
   */

  int spl_start_uboot(void);

  /**
   * spl_display_print() - Display a board-specific message in SPL
   *
   * If CONFIG_SPL_DISPLAY_PRINT is enabled, U-Boot will call this function
   * immediately after displaying the SPL console banner ("U-Boot SPL ...").
   * This function should be provided by the board.
   */

  void spl_display_print(void);

  /**
   * struct spl_boot_device - Describes a boot device used by SPL
   *
   * @boot_device: A number indicating the BOOT_DEVICE type. There are various
   * BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently
   * numbered.
   * @boot_device_name: Named boot device, or NULL if none.
   *
   * Note: Additional fields can be added here, bearing in mind that SPL is
   * size-sensitive and common fields will be present on all boards. This
   * struct can also be used to return additional information about the load
   * process if that becomes useful.
   */
  struct spl_boot_device {
  	uint boot_device;
  	const char *boot_device_name;
  };

  /**
   * Holds information about a way of loading an SPL image
   *

   * @name: User-friendly name for this method (e.g. "MMC")

   * @boot_device: Boot device that this loader supports
   * @load_image: Function to call to load image
   */
  struct spl_image_loader {

  #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
  	const char *name;
  #endif

  	uint boot_device;
  	/**
  	 * load_image() - Load an SPL image
  	 *

  	 * @spl_image: place to put image information

  	 * @bootdev: describes the boot device to load from
  	 */

  	int (*load_image)(struct spl_image_info *spl_image,
  			  struct spl_boot_device *bootdev);

  };
  
  /* Declare an SPL image loader */
  #define SPL_LOAD_IMAGE(__name)					\
  	ll_entry_declare(struct spl_image_loader, __name, spl_image_loader)
  
  /*

   * _priority is the priority of this method, 0 meaning it will be the top

   * choice for this device, 9 meaning it is the bottom choice.

   * _boot_device is the BOOT_DEVICE_... value
   * _method is the load_image function to call

   */

  #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
  #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \
  	SPL_LOAD_IMAGE(_method ## _priority ## _boot_device) = { \
  		.name = _name, \
  		.boot_device = _boot_device, \
  		.load_image = _method, \
  	}
  #else
  #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \

  	SPL_LOAD_IMAGE(_method ## _priority ## _boot_device) = { \
  		.boot_device = _boot_device, \
  		.load_image = _method, \

  	}

  #endif

  /* SPL FAT image functions */

  int spl_load_image_fat(struct spl_image_info *spl_image,
  		       struct blk_desc *block_dev, int partition,

  		       const char *filename);

  int spl_load_image_fat_os(struct spl_image_info *spl_image,
  			  struct blk_desc *block_dev, int partition);

  void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image);

  /* SPL EXT image functions */

  int spl_load_image_ext(struct spl_image_info *spl_image,
  		       struct blk_desc *block_dev, int partition,

  		       const char *filename);

  int spl_load_image_ext_os(struct spl_image_info *spl_image,
  			  struct blk_desc *block_dev, int partition);

  /**

   * spl_early_init() - Set up device tree and driver model in SPL if enabled

   *
   * Call this function in board_init_f() if you want to use device tree and

   * driver model early, before board_init_r() is called.
   *
   * If this is not called, then driver model will be inactive in SPL's
   * board_init_f(), and no device tree will be available.
   */
  int spl_early_init(void);
  
  /**
   * spl_init() - Set up device tree and driver model in SPL if enabled
   *
   * You can optionally call spl_early_init(), then optionally call spl_init().
   * This function will be called from board_init_r() if not called earlier.
   *
   * Both spl_early_init() and spl_init() perform a similar function except that
   * the latter will not set up the malloc() area if
   * CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is enabled, since it is assumed to
   * already be done by a calll to spl_relocate_stack_gd() before board_init_r()
   * is reached.
   *
   * This function will be called from board_init_r() if not called earlier.

   *
   * If this is not called, then driver model will be inactive in SPL's
   * board_init_f(), and no device tree will be available.
   */
  int spl_init(void);

  #ifdef CONFIG_SPL_BOARD_INIT
  void spl_board_init(void);
  #endif

  
  /**
   * spl_was_boot_source() - check if U-Boot booted from SPL
   *
   * This will normally be true, but if U-Boot jumps to second U-Boot, it will
   * be false. This should be implemented by board-specific code.
   *
   * @return true if U-Boot booted from SPL, else false
   */
  bool spl_was_boot_source(void);

  /**
   * spl_dfu_cmd- run dfu command with chosen mmc device interface
   * @param usb_index - usb controller number
   * @param mmc_dev -  mmc device nubmer
   *
   * @return 0 on success, otherwise error code
   */
  int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);

  int spl_mmc_load_image(struct spl_image_info *spl_image,
  		       struct spl_boot_device *bootdev);

  /**
   * spl_invoke_atf - boot using an ARM trusted firmware image
   */
  void spl_invoke_atf(struct spl_image_info *spl_image);

  
  /**
   * board_return_to_bootrom - allow for boards to continue with the boot ROM
   *
   * If a board (e.g. the Rockchip RK3368 boards) provide some
   * supporting functionality for SPL in their boot ROM and the SPL
   * stage wants to return to the ROM code to continue booting, boards
   * can implement 'board_return_to_bootrom'.
   */
  void board_return_to_bootrom(void);

  #endif