Blame view
arch/arm/dts/at91sam9g45-corvus.dts
1.92 KB
d41ce506b Initial Release, ... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 |
/* * at91sam9g45-corvus.dts Device Tree file fir Siemens corvus board * (C) Copyright 2016 Heiko Schocher <hs@denx.de> * * based on: * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> * * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "at91sam9g45.dtsi" / { model = "Siemens corvus"; compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; chosen { u-boot,dm-pre-reloc; stdout-path = &dbgu; }; memory { reg = <0x70000000 0x8000000>; }; clocks { slow_xtal { clock-frequency = <32768>; }; main_xtal { clock-frequency = <12000000>; }; }; ahb { apb { dbgu: serial@ffffee00 { u-boot,dm-pre-reloc; status = "okay"; }; usart1: serial@fff90000 { pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; status = "okay"; }; macb0: ethernet@fffbc000 { phy-mode = "rmii"; status = "okay"; }; watchdog@fffffd40 { status = "okay"; }; spi0: spi@fffa4000{ status = "okay"; cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; mtd_dataflash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <13000000>; reg = <0>; }; }; usb2: gadget@fff78000 { atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; status = "okay"; }; rtc@fffffd20 { atmel,rtt-rtc-time-reg = <&gpbr 0x0>; status = "okay"; }; gpbr: syscon@fffffd60 { status = "okay"; }; rtc@fffffdb0 { status = "okay"; }; }; nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; status = "okay"; }; usb0: ohci@00700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; usb1: ehci@00800000 { status = "okay"; }; }; }; |