Blame view
include/configs/pengwyn.h
6.06 KB
d41ce506b Initial Release, ... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 |
/* * pengwyn.h * * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com> * * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_PENGWYN_H #define __CONFIG_PENGWYN_H #define CONFIG_SERIAL1 #define CONFIG_CONS_INDEX 1 #include <configs/ti_am335x_common.h> /* Clock Defines */ #define V_OSCK 24000000 #define V_SCLK V_OSCK /* set env size */ #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ "fdtfile=am335x-pengwyn.dtb\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ "rootpath=/export/rootfs\0" \ "nfsopts=nolock\0" \ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ "::off\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "netargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=/dev/nfs " \ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ "ip=dhcp\0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcloados=run mmcargs; " \ "bootz ${loadaddr} - ${fdtaddr};\0" \ "mmcboot=mmc dev ${mmcdev}; " \ "if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ "echo Loaded environment from ${bootenv};" \ "run importbootenv;" \ "fi;" \ "if test -n $uenvcmd; then " \ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ "if run loadimage; then " \ "run loadfdt;" \ "run mmcloados;" \ "fi;" \ "fi;\0" \ "netboot=echo Booting from network ...; " \ "setenv autoload no; " \ "dhcp; " \ "tftp ${loadaddr} ${bootfile}; " \ "tftp ${fdtaddr} ${fdtfile}; " \ "run netargs; " \ "bootz ${loadaddr} - ${fdtaddr}\0" \ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "nandargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ "nandrootfstype=ubifs rootwait=1\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ "nand read ${fdtaddr} u-boot-spl-os; " \ "nand read ${loadaddr} kernel; " \ "bootz ${loadaddr} - ${fdtaddr}\0" #endif #define CONFIG_BOOTCOMMAND \ "run mmcboot;" \ "run nandboot;" /* NS16550 Configuration: primary UART via FTDI */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* I2C Configuration */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* SPL */ /* NAND support */ /* NAND Configuration. */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) #define CONFIG_SYS_NAND_PAGE_SIZE 4096 #define CONFIG_SYS_NAND_OOBSIZE 224 #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_BLOCK_SIZE (128*4096) #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\ 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49,\ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,\ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,\ 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,\ 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\ 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\ 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\ 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\ 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\ 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 26 #define CONFIG_SYS_NAND_ECCSTEPS 8 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ CONFIG_SYS_NAND_ECCSTEPS) #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW /* END NAND Configuration. */ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE /* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 /* Size must be a multiple of Nand erase size (524288 b) */ #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 #endif /* * USB configuration. We enable MUSB support, both for host and for * gadget. We set USB0 as peripheral and USB1 as host, based on the * board schematic and physical port wired to each. Then for host we * add mass storage support. */ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST #if defined(CONFIG_SPL_BUILD) /* disable host part of MUSB in SPL */ /* Disable CPSW SPL support so we fit within the 101KiB limit. */ #endif /* Network */ #define CONFIG_PHY_RESET 1 #define CONFIG_PHY_NATSEMI #define CONFIG_PHY_REALTEK /* CPSW support */ #endif /* ! __CONFIG_PENGWYN_H */ |