#
  # For a description of the syntax of this configuration file,
  # see Documentation/kbuild/kconfig-language.txt.
  #
  mainmenu "U-Boot $UBOOTVERSION Configuration"
  
  config UBOOTVERSION
  	string
  	option env="UBOOTVERSION"

  # Allow defaults in arch-specific code to override any given here
  source "arch/Kconfig"

  menu "General setup"

  config LOCALVERSION
  	string "Local version - append to U-Boot release"

  	help
  	  Append an extra string to the end of your U-Boot version.
  	  This will show up on your boot log, for example.
  	  The string you set here will be appended after the contents of
  	  any files with a filename matching localversion* in your
  	  object and source tree, in that order.  Your total string can
  	  be a maximum of 64 characters.
  
  config LOCALVERSION_AUTO
  	bool "Automatically append version information to the version string"

  	default y
  	help
  	  This will try to automatically determine if the current tree is a
  	  release tree by looking for git tags that belong to the current
  	  top of tree revision.
  
  	  A string of the format -gxxxxxxxx will be added to the localversion
  	  if a git-based tree is found.  The string generated by this will be
  	  appended after any matching localversion* files, and after the value
  	  set in CONFIG_LOCALVERSION.
  
  	  (The actual string used here is the first eight characters produced
  	  by running the command:
  
  	    $ git rev-parse --verify HEAD
  
  	  which is done within the script "scripts/setlocalversion".)

  config CC_OPTIMIZE_FOR_SIZE
  	bool "Optimize for size"

  	default y
  	help
  	  Enabling this option will pass "-Os" instead of "-O2" to gcc
  	  resulting in a smaller U-Boot image.
  
  	  This option is enabled by default for U-Boot.

  config SYS_MALLOC_F
  	bool "Enable malloc() pool before relocation"

  	default y if DM

  	help
  	  Before relocation memory is very limited on many platforms. Still,
  	  we can provide a small malloc() pool if needed. Driver model in
  	  particular needs this to operate, so that it can allocate the
  	  initial serial device and any others that are needed.
  
  config SYS_MALLOC_F_LEN
  	hex "Size of malloc() pool before relocation"
  	depends on SYS_MALLOC_F
  	default 0x400
  	help
  	  Before relocation memory is very limited on many platforms. Still,
  	  we can provide a small malloc() pool if needed. Driver model in
  	  particular needs this to operate, so that it can allocate the
  	  initial serial device and any others that are needed.

  menuconfig EXPERT

  	bool "Configure standard U-Boot features (expert users)"
  	default y
  	help
  	  This option allows certain base U-Boot options and settings
  	  to be disabled or tweaked. This is for specialized
  	  environments which can tolerate a "non-standard" U-Boot.
  	  Only use this if you really know what you are doing.
  
  if EXPERT
  	config SYS_MALLOC_CLEAR_ON_INIT
  	bool "Init with zeros the memory reserved for malloc (slow)"
  	default y
  	help
  	  This setting is enabled by default. The reserved malloc
  	  memory is initialized with zeros, so first malloc calls
  	  will return the pointer to the zeroed memory. But this
  	  slows the boot time.
  
  	  It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN
  	  value, has more than few MiB, e.g. when uses bzip2 or bmp logo.
  	  Then the boot time can be significantly reduced.
  	  Warning:
  	  When disabling this, please check if malloc calls, maybe
  	  should be replaced by calloc - if expects zeroed memory.
  endif

  endmenu		# General setup

  menu "Boot images"

  config SUPPORT_SPL
  	bool

  config SUPPORT_TPL
  	bool

  config SPL
  	bool

  	depends on SUPPORT_SPL

  	prompt "Enable SPL"

  	help
  	  If you want to build SPL as well as the normal image, say Y.

  config SPL_STACK_R
  	depends on SPL
  	bool "Enable SDRAM location for SPL stack"
  	help
  	  SPL starts off execution in SRAM and thus typically has only a small
  	  stack available. Since SPL sets up DRAM while in its board_init_f()
  	  function, it is possible for the stack to move there before
  	  board_init_r() is reached. This option enables a special SDRAM
  	  location for the SPL stack. U-Boot SPL switches to this after
  	  board_init_f() completes, and before board_init_r() starts.
  
  config SPL_STACK_R_ADDR
  	depends on SPL_STACK_R
  	hex "SDRAM location for SPL stack"
  	help
  	  Specify the address in SDRAM for the SPL stack. This will be set up
  	  before board_init_r() is called.

  config TPL
  	bool

  	depends on SPL && SUPPORT_TPL

  	prompt "Enable TPL"

  	help
  	  If you want to build TPL as well as the normal image and SPL, say Y.

  config FIT
  	bool "Support Flattened Image Tree"

  	help
  	  This option allows to boot the new uImage structrure,
  	  Flattened Image Tree.  FIT is formally a FDT, which can include
  	  images of various types (kernel, FDT blob, ramdisk, etc.)
  	  in a single blob.  To boot this new uImage structure,
  	  pass the the address of the blob to the "bootm" command.
  
  config FIT_VERBOSE
  	bool "Display verbose messages on FIT boot"
  	depends on FIT
  
  config FIT_SIGNATURE

  	bool "Enable signature verification of FIT uImages"

  	depends on FIT

  	depends on DM

  	select RSA

  	help
  	  This option enables signature verification of FIT uImages,

  	  using a hash signed and verified using RSA. If
  	  CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
  	  hashing is available using hardware, RSA library will use it.

  	  See doc/uImage.FIT/signature.txt for more details.

  config SYS_EXTRA_OPTIONS
  	string "Extra Options (DEPRECATED)"

  	help
  	  The old configuration infrastructure (= mkconfig + boards.cfg)

  	  provided the extra options field. If you have something like

  	  "HAS_BAR,BAZ=64", the optional options
  	    #define CONFIG_HAS
  	    #define CONFIG_BAZ	64
  	  will be defined in include/config.h.
  	  This option was prepared for the smooth migration from the old
  	  configuration to Kconfig. Since this option will be removed sometime,
  	  new boards should not use this option.

  config SYS_TEXT_BASE

  	depends on SPARC || ARC

  	hex "Text Base"
  	help
  	  TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture

  config SYS_CLK_FREQ

  	depends on ARC || ARCH_SUNXI

  	int "CPU clock frequency"
  	help
  	  TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture

  endmenu		# Boot images

  source "common/Kconfig"

  source "dts/Kconfig"

  source "net/Kconfig"
  
  source "drivers/Kconfig"
  
  source "fs/Kconfig"
  
  source "lib/Kconfig"

  
  source "test/Kconfig"