CONFIG_ARM=y
  CONFIG_TARGET_LS1046AQDS=y

  CONFIG_TFABOOT=y

  CONFIG_SYS_TEXT_BASE=0x82000000

  CONFIG_NXP_ESBC=y

  CONFIG_ENV_SIZE=0x2000

  CONFIG_NR_DRAM_BANKS=2

  CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
  CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
  CONFIG_AHCI=y

  CONFIG_DISTRO_DEFAULTS=y

  CONFIG_FIT_VERBOSE=y
  CONFIG_OF_BOARD_SETUP=y

  CONFIG_BOOTDELAY=10
  CONFIG_USE_BOOTARGS=y
  CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
  # CONFIG_USE_BOOTCOMMAND is not set
  CONFIG_MISC_INIT_R=y
  CONFIG_CMD_BOOTZ=y
  CONFIG_CMD_IMLS=y
  CONFIG_CMD_GREPENV=y
  CONFIG_CMD_MEMINFO=y
  CONFIG_CMD_MEMTEST=y
  CONFIG_CMD_GPT=y
  CONFIG_CMD_I2C=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_NAND=y
  CONFIG_CMD_PCI=y

  CONFIG_CMD_USB=y
  CONFIG_CMD_CACHE=y
  CONFIG_MP=y
  CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
  CONFIG_OF_CONTROL=y
  CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"

  CONFIG_DM=y

  CONFIG_SATA_CEVA=y

  CONFIG_DM_MMC=y
  CONFIG_FSL_ESDHC=y

  CONFIG_MTD=y

  CONFIG_MTD_NOR_FLASH=y
  CONFIG_FLASH_CFI_DRIVER=y
  CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
  CONFIG_SYS_FLASH_CFI=y

  CONFIG_MTD_RAW_NAND=y

  CONFIG_SF_DEFAULT_BUS=1

  CONFIG_PHYLIB=y
  CONFIG_E1000=y

  CONFIG_FMAN_ENET=y

  CONFIG_PCI=y
  CONFIG_DM_PCI=y
  CONFIG_DM_PCI_COMPAT=y
  CONFIG_PCIE_LAYERSCAPE=y

  CONFIG_DM_SCSI=y

  CONFIG_SYS_NS16550=y
  CONFIG_SPI=y
  CONFIG_DM_SPI=y
  CONFIG_FSL_DSPI=y
  CONFIG_USB=y
  CONFIG_DM_USB=y
  CONFIG_USB_XHCI_HCD=y
  CONFIG_USB_XHCI_DWC3=y

  CONFIG_RSA=y

  CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

  CONFIG_DM_I2C=y
  CONFIG_DM_GPIO=y