/*
   * Copyright (C) 2014 Charles Manning <cdhmanning@gmail.com>
   *
   * SPDX-License-Identifier:	GPL-2.0+
   *
   * Reference doc http://www.altera.com.cn/literature/hb/cyclone-v/cv_5400A.pdf
   * Note this doc is not entirely accurate. Of particular interest to us is the
   * "header" length field being in U32s and not bytes.
   *
   * "Header" is a structure of the following format.
   * this is positioned at 0x40.
   *
   * Endian is LSB.
   *
   * Offset   Length   Usage
   * -----------------------
   *   0x40        4   Validation word 0x31305341
   *   0x44        1   Version (whatever, zero is fine)
   *   0x45        1   Flags   (unused, zero is fine)
   *   0x46        2   Length  (in units of u32, including the end checksum).
   *   0x48        2   Zero
   *   0x4A        2   Checksum over the header. NB Not CRC32
   *
   * At the end of the code we have a 32-bit CRC checksum over whole binary
   * excluding the CRC.
   *
   * Note that the CRC used here is **not** the zlib/Adler crc32. It is the
   * CRC-32 used in bzip2, ethernet and elsewhere.
   *
   * The image is padded out to 64k, because that is what is
   * typically used to write the image to the boot medium.
   */
  
  #include "pbl_crc32.h"
  #include "imagetool.h"

  #include "mkimage.h"

  #include <image.h>
  
  #define HEADER_OFFSET	0x40
  #define VALIDATION_WORD	0x31305341
  #define PADDED_SIZE	0x10000
  
  /* To allow for adding CRC, the max input size is a bit smaller. */
  #define MAX_INPUT_SIZE	(PADDED_SIZE - sizeof(uint32_t))
  
  static uint8_t buffer[PADDED_SIZE];
  
  static struct socfpga_header {
  	uint32_t validation;
  	uint8_t  version;
  	uint8_t  flags;
  	uint16_t length_u32;
  	uint16_t zero;
  	uint16_t checksum;
  } header;
  
  /*
   * The header checksum is just a very simple checksum over
   * the header area.
   * There is still a crc32 over the whole lot.
   */
  static uint16_t hdr_checksum(struct socfpga_header *header)
  {
  	int len = sizeof(*header) - sizeof(header->checksum);
  	uint8_t *buf = (uint8_t *)header;
  	uint16_t ret = 0;
  
  	while (--len)
  		ret += *buf++;
  
  	return ret;
  }
  
  
  static void build_header(uint8_t *buf, uint8_t version, uint8_t flags,
  			 uint16_t length_bytes)
  {

  	header.validation = cpu_to_le32(VALIDATION_WORD);

  	header.version = version;
  	header.flags = flags;

  	header.length_u32 = cpu_to_le16(length_bytes/4);

  	header.zero = 0;

  	header.checksum = cpu_to_le16(hdr_checksum(&header));

  
  	memcpy(buf, &header, sizeof(header));
  }
  
  /*
   * Perform a rudimentary verification of header and return
   * size of image.
   */
  static int verify_header(const uint8_t *buf)
  {
  	memcpy(&header, buf, sizeof(header));

  	if (le32_to_cpu(header.validation) != VALIDATION_WORD)

  		return -1;

  	if (le16_to_cpu(header.checksum) != hdr_checksum(&header))

  		return -1;

  	return le16_to_cpu(header.length_u32) * 4;

  }
  
  /* Sign the buffer and return the signed buffer size */
  static int sign_buffer(uint8_t *buf,
  			uint8_t version, uint8_t flags,
  			int len, int pad_64k)
  {
  	uint32_t calc_crc;
  
  	/* Align the length up */
  	len = (len + 3) & (~3);
  
  	/* Build header, adding 4 bytes to length to hold the CRC32. */
  	build_header(buf + HEADER_OFFSET,  version, flags, len + 4);
  
  	/* Calculate and apply the CRC */
  	calc_crc = ~pbl_crc32(0, (char *)buf, len);

  	*((uint32_t *)(buf + len)) = cpu_to_le32(calc_crc);

  
  	if (!pad_64k)
  		return len + 4;
  
  	return PADDED_SIZE;
  }
  
  /* Verify that the buffer looks sane */
  static int verify_buffer(const uint8_t *buf)
  {
  	int len; /* Including 32bit CRC */
  	uint32_t calc_crc;
  	uint32_t buf_crc;
  
  	len = verify_header(buf + HEADER_OFFSET);
  	if (len < 0) {

  		debug("Invalid header
  ");

  		return -1;
  	}
  
  	if (len < HEADER_OFFSET || len > PADDED_SIZE) {

  		debug("Invalid header length (%i)
  ", len);

  		return -1;
  	}
  
  	/*
  	 * Adjust length to the base of the CRC.
  	 * Check the CRC.
  	*/
  	len -= 4;
  
  	calc_crc = ~pbl_crc32(0, (const char *)buf, len);

  	buf_crc = le32_to_cpu(*((uint32_t *)(buf + len)));

  
  	if (buf_crc != calc_crc) {
  		fprintf(stderr, "CRC32 does not match (%08x != %08x)
  ",
  			buf_crc, calc_crc);
  		return -1;
  	}
  
  	return 0;
  }
  
  /* mkimage glue functions */
  static int socfpgaimage_verify_header(unsigned char *ptr, int image_size,
  			struct image_tool_params *params)
  {
  	if (image_size != PADDED_SIZE)
  		return -1;
  
  	return verify_buffer(ptr);
  }
  
  static void socfpgaimage_print_header(const void *ptr)
  {
  	if (verify_buffer(ptr) == 0)
  		printf("Looks like a sane SOCFPGA preloader
  ");
  	else
  		printf("Not a sane SOCFPGA preloader
  ");
  }
  
  static int socfpgaimage_check_params(struct image_tool_params *params)
  {
  	/* Not sure if we should be accepting fflags */
  	return	(params->dflag && (params->fflag || params->lflag)) ||
  		(params->fflag && (params->dflag || params->lflag)) ||
  		(params->lflag && (params->dflag || params->fflag));
  }
  
  static int socfpgaimage_check_image_types(uint8_t type)
  {
  	if (type == IH_TYPE_SOCFPGAIMAGE)
  		return EXIT_SUCCESS;
  	return EXIT_FAILURE;
  }
  
  /*
   * To work in with the mkimage framework, we do some ugly stuff...
   *
   * First, socfpgaimage_vrec_header() is called.
   * We prepend a fake header big enough to make the file PADDED_SIZE.
   * This gives us enough space to do what we want later.
   *
   * Next, socfpgaimage_set_header() is called.
   * We fix up the buffer by moving the image to the start of the buffer.
   * We now have some room to do what we need (add CRC and padding).
   */
  
  static int data_size;
  #define FAKE_HEADER_SIZE (PADDED_SIZE - data_size)
  
  static int socfpgaimage_vrec_header(struct image_tool_params *params,
  				struct image_type_params *tparams)
  {
  	struct stat sbuf;
  
  	if (params->datafile &&
  	    stat(params->datafile, &sbuf) == 0 &&
  	    sbuf.st_size <= MAX_INPUT_SIZE) {
  		data_size = sbuf.st_size;
  		tparams->header_size = FAKE_HEADER_SIZE;
  	}
  	return 0;
  }
  
  static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd,
  				struct image_tool_params *params)
  {
  	uint8_t *buf = (uint8_t *)ptr;
  
  	/*
  	 * This function is called after vrec_header() has been called.
  	 * At this stage we have the FAKE_HEADER_SIZE dummy bytes followed by
  	 * data_size image bytes. Total = PADDED_SIZE.
  	 * We need to fix the buffer by moving the image bytes back to
  	 * the beginning of the buffer, then actually do the signing stuff...
  	 */
  	memmove(buf, buf + FAKE_HEADER_SIZE, data_size);
  	memset(buf + data_size, 0, FAKE_HEADER_SIZE);
  
  	sign_buffer(buf, 0, 0, data_size, 0);
  }

  U_BOOT_IMAGE_TYPE(
  	socfpgaimage,
  	"Altera SOCFPGA preloader support",
  	0, /* This will be modified by vrec_header() */
  	(void *)buffer,
  	socfpgaimage_check_params,
  	socfpgaimage_verify_header,
  	socfpgaimage_print_header,
  	socfpgaimage_set_header,
  	NULL,
  	socfpgaimage_check_image_types,
  	NULL,
  	socfpgaimage_vrec_header
  );