Freescale MPC8610HPCD board
  ===========================
  
  
  Building U-Boot
  ---------------
  
      $ make MPC8610HPCD_config
      Configuring for MPC8610HPCD board...
  
      $ make
  
  
  Flashing U-Boot
  ---------------
  The flash is 128M starting at 0xF800_0000.
  
  The alternate image is at 0xFBF0_0000
  The      boot image is at 0xFFF0_0000.
  
  
  To Flash U-Boot into the booting bank:
  
  	tftp 1000000 u-boot.bin
  	protect off all
  	erase fff00000 +$filesize
  	cp.b 1000000 fff00000 $filesize
  
  
  To Flash U-boot into the alternate bank
  
  	tftp 1000000 u-boot.bin
  	erase fbf00000 +$filesize
  	cp.b 1000000 fbf00000 $filesize
  
  
  pixis_reset command
  -------------------
  A new command, "pixis_reset", is introduced to reset mpc8610hpcd board
  using the FPGA sequencer.  When the board restarts, it has the option
  of using either the current or alternate flash bank as the boot
  image, with or without the watchdog timer enabled, and finally with
  or without frequency changes.
  
  Usage is;
  
  	pixis_reset
  	pixis_reset altbank
  	pixis_reset altbank wd
  	pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
  	pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
  
  Examples;
  
  	/* reset to current bank, like "reset" command */
  	pixis_reset
  
  	/* reset board but use the to alternate flash bank */
  	pixis_reset altbank
  
  	/* reset board, use alternate flash bank with watchdog timer enabled*/
  	pixis_reset altbank wd
  
  	/* reset board to alternate bank with frequency changed.
  	 * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
  	 */
  	pixis-reset altbank cf 40 2.5 10

  
  
  DIP Switch Settings
  -------------------
  To manually switch the flash banks using the DIP switch
  settings, toggle both SW6:1 and SW6:2.