/*
   * (C) Copyright 2004
   * Greg Ungerer <greg.ungerer@opengear.com>.
   * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   *
   * See file CREDITS for list of people who contributed to this
   * project.
   *
   * This program is free software; you can redistribute it and/or
   * modify it under the terms of the GNU General Public License as
   * published by the Free Software Foundation; either version 2 of
   * the License, or (at your option) any later version.
   *
   * This program is distributed in the hope that it will be useful,
   * but WITHOUT ANY WARRANTY; without even the implied warranty of
   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
   * GNU General Public License for more details.
   *
   * You should have received a copy of the GNU General Public License
   * along with this program; if not, write to the Free Software
   * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
   * MA 02111-1307 USA
   */
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  /*
   * High Level Configuration Options
   * (easy to change)
   */
  #define CONFIG_KS8695	1		/* it is a KS8695 CPU */
  #define CONFIG_CM4008	1		/* it is an OpenGear CM4008 boad */

  #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/

  
  #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
  #define CONFIG_SETUP_MEMORY_TAGS 1
  #define CONFIG_INITRD_TAG	 1

  #define CONFIG_DRIVER_KS8695ETH		/* use KS8695 ethernet driver	*/

  /*
   * Size of malloc() pool
   */

  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
  #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

  
  /*
   * Hardware drivers
   */
  
  /*
   * select serial console configuration
   */

  #define CONFIG_ENV_IS_NOWHERE

  #define	CONFIG_SERIAL1
  #define CONFIG_CONS_INDEX	1
  #define CONFIG_BAUDRATE		115200

  #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

  
  /*

   * BOOTP options
   */
  #define CONFIG_BOOTP_BOOTFILESIZE
  #define CONFIG_BOOTP_BOOTPATH
  #define CONFIG_BOOTP_GATEWAY
  #define CONFIG_BOOTP_HOSTNAME
  
  
  /*

   * Command line configuration.
   */
  #include <config_cmd_default.h>

  #undef CONFIG_CMD_SAVEENV

  
  #define CONFIG_BOOTDELAY	0
  #define CONFIG_BOOTARGS		"mem=16M console=ttyAM0,115200"
  #define CONFIG_BOOTCOMMAND	"gofsk 0x02200000"
  
  /*
   * Miscellaneous configurable options
   */

  #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
  #define CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
  #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
  #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
  #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
  #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

  #define CONFIG_SYS_MEMTEST_START	0x00800000	/* memtest works on	*/
  #define CONFIG_SYS_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/

  #undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */

  #define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */

  #define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */

  
  /*-----------------------------------------------------------------------
   * Stack sizes
   *
   * The stack sizes are set up in start.S using the settings below
   */
  #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
  #ifdef CONFIG_USE_IRQ
  #define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
  #define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
  #endif
  
  /*-----------------------------------------------------------------------
   * Physical Memory Map
   */
  #define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
  #define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
  #define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
  
  #define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
  #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */

  #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1

  
  /*-----------------------------------------------------------------------
   * FLASH and environment organization
   */

  #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
  #define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */

  
  /* timeout values are in ticks */

  #define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
  #define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */

  #define CONFIG_ENV_SIZE		0x20000     /* Total Size of Environment */

  
  #endif	/* __CONFIG_H */