Blame view
include/configs/etamin.h
6.38 KB
6b3943f1b siemens,am33x: ad... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 |
/* * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. * * Based on: * U-Boot file:/include/configs/am335x_evm.h * * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_ETAMIN_H #define __CONFIG_ETAMIN_H #include "siemens-am33x-common.h" /* NAND specific changes for etamin due to different page size */ #undef CONFIG_SYS_NAND_PAGE_SIZE #undef CONFIG_SYS_NAND_OOBSIZE #undef CONFIG_SYS_NAND_BLOCK_SIZE #undef CONFIG_SYS_NAND_ECCPOS #undef CONFIG_SYS_NAND_U_BOOT_OFFS #undef CONFIG_SYS_ENV_SECT_SIZE #undef CONFIG_ENV_OFFSET #undef CONFIG_NAND_OMAP_ECCSCHEME #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW #define CONFIG_ENV_OFFSET 0x980000 #define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ #define CONFIG_SYS_NAND_PAGE_SIZE 4096 #define CONFIG_SYS_NAND_OOBSIZE 224 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE) #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ } #undef CONFIG_SYS_NAND_ECCSIZE #undef CONFIG_SYS_NAND_ECCBYTES #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 26 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 #define CONFIG_SYS_NAND_MAX_CHIPS 1 #undef CONFIG_SYS_MAX_NAND_DEVICE #define CONFIG_SYS_MAX_NAND_DEVICE 3 #define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_NAND_ONFI_DETECTION |
6b3943f1b siemens,am33x: ad... |
72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 |
#define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC /* FWD Button = 27 * SRV Button = 87 */ #define BOARD_DFU_BUTTON_GPIO 27 #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ /* In dfu mode keep led1 on */ #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "button_dfu0=27\0" \ "button_dfu1=87\0" \ "led0=3,0,1\0" \ "led1=4,0,0\0" \ "led2=5,0,1\0" \ "led3=87,0,1\0" \ "led4=60,0,1\0" \ "led5=63,0,1\0" |
6b3943f1b siemens,am33x: ad... |
89 90 91 92 93 94 95 96 97 |
/* Physical Memory Map */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ /* I2C Configuration */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 |
6b3943f1b siemens,am33x: ad... |
98 |
#undef CONFIG_MII |
6b3943f1b siemens,am33x: ad... |
99 100 101 102 103 104 105 106 107 108 109 110 111 112 |
#define CONFIG_PHY_SMSC #define CONFIG_FACTORYSET /* use both define to compile a SPL compliance test */ /* #define CONFIG_SPL_CMT #define CONFIG_SPL_CMT_DEBUG */ /* nedded by compliance test in read mode */ #if defined(CONFIG_SPL_CMT) #define CONFIG_SYS_DCACHE_OFF #endif |
6b3943f1b siemens,am33x: ad... |
113 114 115 116 |
/* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0xB80000 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) |
6b3943f1b siemens,am33x: ad... |
117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 |
#undef COMMON_ENV_DFU_ARGS #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ "setenv bootargs ${bootargs};" \ "mtdparts default;" \ "draco_led 1;" \ "dfu 0 mtd 0;" \ "draco_led 0;\0" \ #undef DFU_ALT_INFO_NAND_V2 #define DFU_ALT_INFO_NAND_V2 \ "spl mtddev;" \ "spl.backup1 mtddev;" \ "spl.backup2 mtddev;" \ "spl.backup3 mtddev;" \ "u-boot mtddev;" \ "u-boot.env0 mtddev;" \ "u-boot.env1 mtddev;" \ "rootfs mtddevubi" \ |
6b3943f1b siemens,am33x: ad... |
135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 |
#undef CONFIG_ENV_SETTINGS_NAND_V2 #define CONFIG_ENV_SETTINGS_NAND_V2 \ "nand_active_ubi_vol=rootfs_a\0" \ "rootfs_name=rootfs\0" \ "kernel_name=uImage\0"\ "nand_root_fs_type=ubifs rootwait=1\0" \ "nand_args=run bootargs_defaults;" \ "mtdparts default;" \ "setenv ${partitionset_active} true;" \ "if test -n ${A}; then " \ "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ "fi;" \ "if test -n ${B}; then " \ "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ "fi;" \ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ "ubi.mtd=rootfs,${ubi_off};" \ "setenv bootargs ${bootargs} " \ "root=${nand_root} noinitrd ${mtdparts} " \ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ "=mtdoops\0" \ COMMON_ENV_DFU_ARGS \ "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ COMMON_ENV_NAND_BOOT \ "ubi part rootfs ${ubi_off};" \ "ubifsmount ubi0:${nand_active_ubi_vol};" \ "ubifsload ${kloadaddr} boot/${kernel_name};" \ "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ "bootm ${kloadaddr} - ${loadaddr}\0" \ "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ "bootm ${kloadaddr} - ${loadaddr}\0" \ COMMON_ENV_NAND_CMDS #ifndef CONFIG_SPL_BUILD #define CONFIG_NAND_CS_INIT #define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 #define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 #define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 #define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 #define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e #define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 #define CONFIG_MTD_CONCAT /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=etamin\0" \ "ubi_off=4096\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ CONFIG_ENV_SETTINGS_V2 \ CONFIG_ENV_SETTINGS_NAND_V2 #ifndef CONFIG_RESTORE_FLASH #define CONFIG_BOOTCOMMAND \ "if dfubutton; then " \ "run dfu_start; " \ "reset; " \ "fi;" \ "run nand_boot;" \ "run nand_boot_backup;" \ "reset;" #else #define CONFIG_BOOTCOMMAND \ "setenv autoload no; " \ "dhcp; " \ "if tftp 80000000 debrick.scr; then " \ "source 80000000; " \ "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_ETAMIN_H */ |