/*
   * Copyright (C) 2016 Stefan Roese <sr@denx.de>
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */

  #ifndef _CONFIG_MVEBU_ARMADA_37XX_H
  #define _CONFIG_MVEBU_ARMADA_37XX_H

  
  /*
   * High Level Configuration Options (easy to change)
   */
  #define CONFIG_DISPLAY_BOARDINFO_LATE

  /* additions for new ARM relocation support */
  #define CONFIG_SYS_SDRAM_BASE	0x00000000
  
  #define CONFIG_NR_DRAM_BANKS	1
  
  /* auto boot */
  #define CONFIG_PREBOOT

  #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
  					  115200, 230400, 460800, 921600 }
  
  /*
   * For booting Linux, the board info and command line data
   * have to be in the first 8 MB of memory, since this is
   * the maximum mapped by the Linux kernel during initialization.
   */
  #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
  #define CONFIG_INITRD_TAG		/* enable INITRD tag */
  #define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
  
  #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */

  
  /*
   * Size of malloc() pool
   */
  #define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */
  
  /*
   * Other required minimal configurations
   */

  #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */

  #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
  #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
  #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
  #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
  #define CONFIG_SYS_MAXARGS	32	/* max number of command args */

  #define CONFIG_SYS_ALT_MEMTEST
  
  /* End of 16M scrubbed by training in bootrom */
  #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
  
  /*
   * I2C
   */
  #define CONFIG_I2C_MV
  #define CONFIG_SYS_I2C_SLAVE		0x0
  
  /*
   * SPI Flash configuration
   */
  #define CONFIG_ENV_SPI_BUS		0
  #define CONFIG_ENV_SPI_CS		0
  
  /* SPI NOR flash default params, used by sf commands */
  #define CONFIG_SF_DEFAULT_SPEED		1000000
  #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
  #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
  
  /* Environment in SPI NOR flash */

  #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
  #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
  #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
  
  /*
   * Ethernet Driver configuration
   */

  #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */

  #define CONFIG_ARP_TIMEOUT	200
  #define CONFIG_NET_RETRY_COUNT	50

  #define CONFIG_PHY_MARVELL

  #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)

  
  /* USB ethernet */

  
  /*
   * SATA/SCSI/AHCI configuration
   */

  #define CONFIG_SCSI_AHCI_PLAT

  #define CONFIG_LBA48
  #define CONFIG_SYS_64BIT_LBA
  
  #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
  #define CONFIG_SYS_SCSI_MAX_LUN		1
  #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  					 CONFIG_SYS_SCSI_MAX_LUN)

  #define BOOT_TARGET_DEVICES(func) \
  	func(MMC, mmc, 1) \
  	func(MMC, mmc, 0) \
  	func(USB, usb, 0) \
  	func(SCSI, scsi, 0) \
  	func(PXE, pxe, na) \
  	func(DHCP, dhcp, na)
  
  #include <config_distro_bootcmd.h>

  #define CONFIG_EXTRA_ENV_SETTINGS	\
  	"scriptaddr=0x4d00000\0"	\
  	"pxefile_addr_r=0x4e00000\0"	\
  	"fdt_addr_r=0x4f00000\0"	\
  	"kernel_addr_r=0x5000000\0"	\

  	"ramdisk_addr_r=0x8000000\0"	\
  	BOOTENV

  #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */