/*
   * Copyright (C) 2015 Freescale Semiconductor, Inc.
   *
   * Configuration settings for the SolidRun mx6 based boards
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  #ifndef __MX6CUBOXI_CONFIG_H
  #define __MX6CUBOXI_CONFIG_H

  #include "mx6_common.h"

  #include "imx6_spl.h"

  #define CONFIG_IMX_THERMAL

  #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

  #define CONFIG_MXC_UART

  
  /* MMC Configs */

  #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

  /* SATA Configuration */

  #ifdef CONFIG_CMD_SATA

  #define CONFIG_SYS_SATA_MAX_DEVICE      1
  #define CONFIG_DWC_AHSATA_PORT_ID       0
  #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48

  #endif

  /* Ethernet Configuration */
  #define CONFIG_FEC_MXC

  #define CONFIG_MII
  #define IMX_FEC_BASE			ENET_BASE_ADDR
  #define CONFIG_FEC_XCV_TYPE		RGMII
  #define CONFIG_FEC_MXC_PHYADDR		0

  #define CONFIG_PHY_ATHEROS

  /* Framebuffer */

  #define CONFIG_VIDEO_IPUV3

  #define CONFIG_VIDEO_BMP_RLE8
  #define CONFIG_SPLASH_SCREEN
  #define CONFIG_SPLASH_SCREEN_ALIGN
  #define CONFIG_BMP_16BPP
  #define CONFIG_VIDEO_LOGO
  #define CONFIG_VIDEO_BMP_LOGO
  #define CONFIG_IMX_HDMI
  #define CONFIG_IMX_VIDEO_SKIP

  /* USB */

  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
  #define CONFIG_MXC_USB_FLAGS		0
  #define CONFIG_USB_MAX_CONTROLLER_COUNT	2

  #define CONFIG_PREBOOT \
  	"if hdmidet; then " \
  		"usb start; "		       \
  		"setenv stdin  serial,usbkbd; "\
  		"setenv stdout serial,vga; "   \
  		"setenv stderr serial,vga; "   \
  	"else " \
  		"setenv stdin  serial; " \
  		"setenv stdout serial; " \
  		"setenv stderr serial; " \
  	"fi;"

  /* Command definition */

  #define CONFIG_MXC_UART_BASE	UART1_BASE

  #define CONSOLE_DEV	"ttymxc0"

  #define CONFIG_SYS_FSL_USDHC_NUM	1
  #define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */

  #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

  #ifndef CONFIG_SPL_BUILD

  #define CONFIG_EXTRA_ENV_SETTINGS \

  	"fdtfile=undefined\0" \

  	"fdt_addr_r=0x18000000\0" \

  	"fdt_addr=0x18000000\0" \
  	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
  	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  	"ramdisk_addr_r=0x13000000\0" \
  	"ramdiskaddr=0x13000000\0" \
  	"initrd_high=0xffffffff\0" \
  	"fdt_high=0xffffffff\0" \

  	"ip_dyn=yes\0" \

  	"console=" CONSOLE_DEV ",115200\0" \

  	"bootm_size=0x10000000\0" \
  	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \

  	"finduuid=part uuid mmc 0:1 uuid\0" \

  	"update_sd_firmware=" \
  		"if test ${ip_dyn} = yes; then " \
  			"setenv get_cmd dhcp; " \
  		"else " \
  			"setenv get_cmd tftp; " \
  		"fi; " \
  		"if mmc dev ${mmcdev}; then "	\
  			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
  				"setexpr fw_sz ${filesize} / 0x200; " \
  				"setexpr fw_sz ${fw_sz} + 1; "	\
  				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  			"fi; "	\
  		"fi\0" \

  	"findfdt="\

  		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \
  			"setenv fdtfile imx6q-hummingboard2.dtb; fi; " \
  		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \
  			"setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \

  		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
  			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
  		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
  			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
  		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
  			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
  		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
  			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
  		"if test $fdtfile = undefined; then " \
  			"echo WARNING: Could not determine dtb to use; fi; \0" \

  	BOOTENV

  #define BOOT_TARGET_DEVICES(func) \
  	func(MMC, mmc, 0) \

  	func(SATA, sata, 0) \

  	func(USB, usb, 0) \
  	func(PXE, pxe, na) \
  	func(DHCP, dhcp, na)

  #include <config_distro_bootcmd.h>
  
  #else
  #define CONFIG_EXTRA_ENV_SETTINGS
  #endif /* CONFIG_SPL_BUILD */

  /* Physical Memory Map */
  #define CONFIG_NR_DRAM_BANKS           1
  #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  
  #define CONFIG_SYS_INIT_SP_OFFSET \
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR \
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  
  /* Environment organization */
  #define CONFIG_ENV_SIZE			(8 * 1024)

  #define CONFIG_ENV_OFFSET		(8 * 64 * 1024)

  #endif                         /* __MX6CUBOXI_CONFIG_H */