Eric Lee / smarc-uboot

Blame view

include/configs/platinum.h 6.52 KB
edit raw normal view history
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
1
2
3
4
5
6
7
8
 
  /*
   * Copyright (C) 2014, Barco (www.barco.com)
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  #ifndef __PLATINUM_CONFIG_H__
  #define __PLATINUM_CONFIG_H__
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
9
 
  /* SPL */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
10
11
12
13
14
15
 
  
  /* Location in NAND to read U-Boot from */
  #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  
  #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  #include "mx6_common.h"
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
16
17
 
  
  /*
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
18
19
 
   * Hardware configuration
   */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
20
21
22
 
  /* UART config */
  #define CONFIG_MXC_UART
  #define CONFIG_MXC_UART_BASE			UART1_BASE
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
23
24
25
26
 
  
  /* I2C config */
  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_MXC
03544c664   Albert ARIBAUD \\(3ADEV\\)   I2C: mxc_i2c: mak... 
27
28
 
  #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
  #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
f8cb101e1   York Sun   driver/i2c/mxc: E... 
29
 
  #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
30
31
32
 
  #define CONFIG_SYS_I2C_SPEED			100000
  
  /* MMC config */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
33
34
 
  #define CONFIG_SYS_FSL_ESDHC_ADDR		0
  #define CONFIG_SYS_FSL_USDHC_NUM		1
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
35
36
37
38
39
 
  
  /* Ethernet config */
  #define CONFIG_FEC_MXC
  #define CONFIG_MII
  #define IMX_FEC_BASE				ENET_BASE_ADDR
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
40
 
  /* USB config */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
 
  #define CONFIG_MXC_USB_PORT			1
  #define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
  #define CONFIG_MXC_USB_FLAGS			0
  
  /* Memory config */
  #define CONFIG_NR_DRAM_BANKS			1
  #define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
  #ifndef PHYS_SDRAM_SIZE
  #define PHYS_SDRAM_SIZE				(1024 << 20)
  #endif
  
  #define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
  #define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
  
  #define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
  						 GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
  						 CONFIG_SYS_INIT_SP_OFFSET)
  
  #define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
62
63
64
 
  #ifdef CONFIG_CMD_NAND
  
  /* NAND config */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
65
66
67
68
69
70
71
72
73
 
  #ifndef CONFIG_SYS_NAND_MAX_CHIPS
  #define CONFIG_SYS_NAND_MAX_CHIPS		2
  #endif
  #define CONFIG_SYS_MAX_NAND_DEVICE		1
  #define CONFIG_SYS_NAND_BASE			0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION
  
  /* DMA config, needed for GPMI/MXS NAND support */
5d6050fdb   Stefan Roese   arm: mx6: Add Bar... 
74
 








5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




75




  /* Environment in NAND */









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




76
77
78
79
80
81
82
83
84
85




  #define CONFIG_ENV_OFFSET		(16 << 20)
  #define CONFIG_ENV_SECT_SIZE		(128 << 10)
  #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
  #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
  
  #else /* CONFIG_CMD_NAND */
  
  /* Environment in MMC */
  #define CONFIG_ENV_SIZE			(8 << 10)









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




86
87
88
89
90
91
92
93




  #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
  #define CONFIG_SYS_MMC_ENV_DEV		0
  
  #endif /* CONFIG_CMD_NAND */
  
  /*
   * U-Boot configuration
   */









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




94




  /* Board startup config */









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




95




  #define CONFIG_MISC_INIT_R









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




96
97
98




  #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
  #define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
  						 PHYS_SDRAM_SIZE - (12 << 20))









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




99
100
101




  #define CONFIG_BOOTCOMMAND			"run bootubi_scr"
  
  /* Miscellaneous configurable options */









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




102




  #define CONFIG_PREBOOT









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




103




  /* MTD/UBI/UBIFS config */









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




104
105




  #define CONFIG_MTD_DEVICE
  #define CONFIG_MTD_PARTITIONS









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




106












5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133




  /*
   * Environment configuration
   */
  
  #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
  #define CONFIG_COMMON_ENV_UBI						\
  	"setubipartition=env set ubipartition ubi\0"			\
  	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
  #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
  #define CONFIG_COMMON_ENV_UBI						\
  	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
  	"setubirfs=env set ubirfs ubi0:rootfs\0"
  #endif
  
  #define CONFIG_COMMON_ENV_MISC						\
  	"user=user\0"							\
  	"project="CONFIG_PLATINUM_PROJECT"\0"				\
  	"uimage=uImage\0"						\
  	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
  	"serverip=serverip\0"						\
  	"memaddrlinux=0x10800000\0"					\
  	"memaddrsrc=0x11000000\0"					\
  	"memaddrdtb=0x12000000\0"					\
  	"console=ttymxc0\0"						\
  	"baudrate=115200\0"						\
  	"boot_scr=boot.uboot\0"						\
  	"boot_vol=0\0"							\









43ede0bca
 
 Tom Rini
 
Kconfig: Migrate ...




134
135




  	"mtdids="CONFIG_MTDIDS_DEFAULT"\0"					\
  	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"					\









5d6050fdb
 
 Stefan Roese
 
arm: mx6: Add Bar...




136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201




  	"mmcfs=ext2\0"							\
  	"mmcrootpart=1\0"						\
  	\
  	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
  	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
  	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
  	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
  	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
  	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
  	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
  	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
  	\
  	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
  	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
  	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
  	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
  	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
  		"$mmcfilelinux\0"					\
  	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
  		"$mmcfiledtb\0"						\
  	\
  	"ubipart=ubi part $ubipartition\0"				\
  	"ubimount=ubifsmount $ubirfs\0"					\
  	\
  	"setbootargscommon=env set bootargs $bootargs "			\
  		"console=$console,$baudrate enable_wait_mode=off\0"	\
  	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
  	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
  	"setbootargsubirfs=env set bootargs $bootargs "			\
  		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
  	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
  		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
  	"setbootargsmmcrfs=env set bootargs $bootargs "			\
  		"root=$mmcrootdev rootwait rw\0"			\
  	\
  	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
  		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
  			"setbootargsnfsrfs;"				\
  			"run loadtftpkernel loadtftpdtb;"		\
  			"bootm $memaddrlinux - $memaddrdtb\0"		\
  	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
  			"run setubipartition setubirfs;"		\
  			"run setbootargscommon setbootargsmtd "		\
  				"setbootargsubirfs;"			\
  			"run loadtftpkernel loadtftpdtb;"		\
  			"bootm $memaddrlinux - $memaddrdtb\0"		\
  	"bootubi=run setubipartition setubirfs setubifilelinux "	\
  				"setubipfiledtb;"			\
  			"run setbootargscommon setbootargsmtd "		\
  				"setbootargsubirfs;"			\
  			"run ubipart ubimount loadubikernel loadubidtb;" \
  			"bootm $memaddrlinux - $memaddrdtb\0"		\
  	"bootubi_scr=run setubipartition setubirfs;"			\
  			"run ubipart ubimount;"				\
  			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
  			"then source ${memaddrsrc}; else run bootubi; fi\0" \
  	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
  			"setbootargscommon setbootargsmmcrfs;"		\
  			"run loadmmckernel loadmmcdtb;"			\
  			"bootm $memaddrlinux - $memaddrdtb\0"		\
  	\
  	"bootcmd="CONFIG_BOOTCOMMAND"\0"
  
  #define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
  							CONFIG_COMMON_ENV_UBI
  #endif /* __PLATINUM_CONFIG_H__ */