/*

   * LG Optimus Black codename sniper config

   *
   * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  #include <asm/arch/cpu.h>
  #include <asm/arch/omap.h>
  
  /*
   * CPU
   */

  #define CONFIG_ARM_ARCH_CP15_ERRATA

  
  /*

   * Board
   */

  #define CONFIG_MISC_INIT_R

  
  /*
   * Clocks
   */
  
  #define CONFIG_SYS_TIMERBASE	OMAP34XX_GPT2
  #define CONFIG_SYS_PTV		2
  
  #define V_NS16550_CLK		48000000
  #define V_OSCK			26000000
  #define V_SCLK			(V_OSCK >> 1)
  
  /*
   * DRAM
   */

  #define CONFIG_NR_DRAM_BANKS	2
  #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
  #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
  
  /*
   * Memory
   */

  #define CONFIG_SYS_SDRAM_BASE		0x80000000
  #define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \

  					 GENERATED_GBL_DATA_SIZE)
  
  #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024 + CONFIG_ENV_SIZE)
  
  /*

   * I2C
   */
  
  #define CONFIG_SYS_I2C

  #define CONFIG_I2C_MULTI_BUS

  /*

   * Input
   */
  
  #define CONFIG_TWL4030_INPUT
  
  /*

   * SPL
   */

  #define CONFIG_SPL_TEXT_BASE		0x40200000

  #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
  					 CONFIG_SPL_TEXT_BASE)

  #define CONFIG_SPL_BSS_START_ADDR	0x80000000
  #define CONFIG_SPL_BSS_MAX_SIZE		(512 * 1024)
  #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
  #define CONFIG_SYS_SPL_MALLOC_SIZE	(1024 * 1024)
  #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK

  #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		1
  #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME			"u-boot.img"

  #define CONFIG_SYS_CBSIZE	512

  
  /*
   * Serial
   */

  #ifdef CONFIG_SPL_BUILD

  #define CONFIG_SYS_NS16550_SERIAL
  #define CONFIG_SYS_NS16550_REG_SIZE	(-4)

  #endif

  #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

  #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
  #define CONFIG_CONS_INDEX		3

  #define CONFIG_SYS_BAUDRATE_TABLE	{ 4800, 9600, 19200, 38400, 57600, \
  					  115200 }
  
  /*
   * Environment
   */
  
  #define CONFIG_ENV_SIZE		(128 * 1024)

  
  #define CONFIG_ENV_OVERWRITE
  
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"kernel_addr_r=0x82000000\0" \

  	"loadaddr=0x82000000\0" \
  	"fdt_addr_r=0x88000000\0" \
  	"fdtaddr=0x88000000\0" \
  	"ramdisk_addr_r=0x88080000\0" \
  	"pxefile_addr_r=0x80100000\0" \
  	"scriptaddr=0x80000000\0" \
  	"bootm_size=0x10000000\0" \

  	"boot_mmc_dev=0\0" \
  	"kernel_mmc_part=3\0" \
  	"recovery_mmc_part=4\0" \

  	"fdtfile=omap3-sniper.dtb\0" \
  	"bootfile=/boot/extlinux/extlinux.conf\0" \

  	"bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"

  
  /*

   * ATAGs

   */

  #define CONFIG_SETUP_MEMORY_TAGS
  #define CONFIG_CMDLINE_TAG
  #define CONFIG_INITRD_TAG
  #define CONFIG_REVISION_TAG

  #define CONFIG_SERIAL_TAG

  
  /*
   * Boot
   */
  
  #define CONFIG_SYS_LOAD_ADDR	0x82000000

  #define CONFIG_BOOTCOMMAND \
  	"setenv boot_mmc_part ${kernel_mmc_part}; " \

  	"if test reboot-${reboot-mode} = reboot-r; then " \
  	"echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \

  	"if test reboot-${reboot-mode} = reboot-b; then " \
  	"echo fastboot; fastboot 0; fi; " \

  	"part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
  	"part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
  	"mmc dev ${boot_mmc_dev}; " \
  	"mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
  	"bootm ${kernel_addr_r};"
  
  /*
   * Defaults
   */
  
  #include <config_defaults.h>
  
  #endif