MIPS Malta board
  
  How to flash using a MIPS Navigator Probe:
  
    - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will
      be unable to flash your Malta using a Navigator Probe.
  
    - Connect Navigator Console to your probe and Malta as usual.
  
    - Within Navigator Console run the following commands:
  
        source /path/to/u-boot/board/imgtec/malta/flash-malta-boot.tcl
        reset
        flash-boot /path/to/u-boot/u-boot.bin
  
    - You should now be able to reboot your Malta to a U-Boot shell.