Blame view
doc/README.m54418twr
8.74 KB
186fc4db2 ColdFire: Add Fre... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
Freescale MCF54418TWR ColdFire Development Board ================================================ TsiChung Liew(Tsi-Chung.Liew@freescale.com) Created Mar 22, 2012 =========================================== Changed files: ============== - board/freescale/m54418twr/m54418twr.c Dram setup - board/freescale/m54418twr/Makefile Makefile - board/freescale/m54418twr/config.mk config make - board/freescale/m54418twr/u-boot.lds Linker description |
6ba2da90d m68k: doc: update... |
16 17 |
- board/freescale/m54418twr/sbf_dram_init.S DDR/SDRAM initialization |
186fc4db2 ColdFire: Add Fre... |
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 |
- arch/m68k/cpu/mcf5445x/cpu.c cpu specific code - arch/m68k/cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs - arch/m68k/cpu/mcf5445x/interrupts.c cpu specific interrupt support - arch/m68k/cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock - arch/m68k/cpu/mcf5445x/Makefile Makefile - arch/m68k/cpu/mcf5445x/config.mk config make - arch/m68k/cpu/mcf5445x/start.S start up assembly code - doc/README.m54418twr This readme file - drivers/net/mcffec.c ColdFire common FEC driver - drivers/net/mcfmii.c ColdFire common MII driver - drivers/serial/mcfuart.c ColdFire common UART driver - arch/m68k/include/asm/bitops.h Bit operation function export - arch/m68k/include/asm/byteorder.h Byte order functions - arch/m68k/include/asm/fec.h FEC structure and definition - arch/m68k/include/asm/global_data.h Global data structure - arch/m68k/include/asm/immap.h ColdFire specific header file and driver macros - arch/m68k/include/asm/immap_5441x.h mcf5441x specific header file - arch/m68k/include/asm/io.h io functions - arch/m68k/include/asm/m5441x.h mcf5441x specific header file - arch/m68k/include/asm/posix_types.h Posix - arch/m68k/include/asm/processor.h header file - arch/m68k/include/asm/ptrace.h Exception structure - arch/m68k/include/asm/rtc.h Realtime clock header file - arch/m68k/include/asm/string.h String function export - arch/m68k/include/asm/timer.h Timer structure and definition - arch/m68k/include/asm/types.h Data types definition - arch/m68k/include/asm/uart.h Uart structure and definition - arch/m68k/include/asm/u-boot.h u-boot structure - include/configs/M54418TWR.h Board specific configuration file - arch/m68k/lib/board.c board init function - arch/m68k/lib/cache.c - arch/m68k/lib/interrupts.c Coldfire common interrupt functions - arch/m68k/lib/time.c Timer functions (Dma timer and PIT) - arch/m68k/lib/traps.c Exception init code 1 MCF5441x specific Options/Settings ==================================== 1.1 pre-loader is no longer suppoer in thie coldfire family 1.2 Configuration settings for M54418TWR Development Board CONFIG_MCF5441x -- define for all MCF5441x CPUs CONFIG_M54418 -- define for all Freescale MCF54418 CPUs |
186fc4db2 ColdFire: Add Fre... |
66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 |
CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot CONFIG_MCFTMR -- define to use DMA timer CONFIG_SYS_IMMR -- define for MBAR offset CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc CONFIG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== 2.1. System memory map: MRAM: 0x00000000-0x0003FFFF (256KB) DDR: 0x40000000-0x47FFFFFF (128MB) SRAM: 0x80000000-0x8000FFFF (64KB) IP: 0xE0000000-0xFFFFFFFF (512MB) 3. COMPILATION ============== 3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF version) from codesourcery.com was used. Download it from: http://www.codesourcery.com/gnu_toolchains/coldfire/download.html 3.2 Compilation export CROSS_COMPILE=cross-compile-prefix cd u-boot make distclean make M54418TWR_config, or - default to spi serial flash boot, 50Mhz input clock make M54418TWR_nand_mii_config, or - default to nand flash boot, mii mode, 25Mhz input clock make M54418TWR_nand_rmii_config, or - default to nand flash boot, rmii mode, 50Mhz input clock make M54418TWR_nand_rmii_lowfreq_config, or - default to nand flash boot, rmii mode, 50Mhz input clock make M54418TWR_serial_mii_config, or - default to spi serial flash boot, 25Mhz input clock make M54418TWR_serial_rmii_config, or - default to spi serial flash boot, 50Mhz input clock make 4. SCREEN DUMP ============== 4.1 M54418TWR Development board Boot from NAND flash (NOTE: May not show exactly the same) U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54) CPU: Freescale MCF54418 (Mask:a3 Version:1) CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz INP CLK 50 MHz VCO CLK 500 MHz Board: Freescale MCF54418 Tower System SPI: ready DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: FEC0, FEC1 -> pri baudrate=115200 bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k ernel)ro,-(jffs2) console=ttyS0,115200 bootdelay=2 eth1addr=00:e0:0c:bc:e5:61 ethact=FEC0 ethaddr=00:e0:0c:bc:e5:60 fileaddr=40010000 filesize=27354 gatewayip=192.168.1.1 hostname=M54418TWR inpclk=50000000 ipaddr=192.168.1.2 load=tftp ${loadaddr} ${u-boot}; loadaddr=0x40010000 mem=129024k netdev=eth0 netmask=255.255.255.0 prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save serverip=192.168.1.1 stderr=serial stdin=serial stdout=serial u-boot=u-boot.bin upd=run load; run prog Environment size: 653/131068 bytes -> bdinfo memstart = 0x40000000 memsize = 0x08000000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 sramstart = 0x80000000 sramsize = 0x00010000 mbar = 0xFC000000 cpufreq = 250 MHz busfreq = 125 MHz flbfreq = 125 MHz inpfreq = 50 MHz vcofreq = 500 MHz ethaddr = 00:e0:0c:bc:e5:60 eth1addr = 00:e0:0c:bc:e5:61 ip_addr = 192.168.1.2 baudrate = 115200 bps -> help ? - alias for 'help' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootvx - Boot vxWorks from an ELF image cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation dcache - enable or disable data cache dhcp - boot image via network using DHCP/TFTP protocol echo - echo args to console editenv - edit environment variable env - environment handling commands exit - exit script false - do nothing, unsuccessfully go - start application at address 'addr' help - print command description/usage icache - enable or disable instruction cache iminfo - print header information for application image imxtract- extract a part of a multi-image itest - return true/false on integer compare loop - infinite loop on address range md - memory display mdio - MDIO utility commands mii - MII utility commands mm - memory modify (auto-incrementing address) mtest - simple RAM read/write test mw - memory write (fill) nand - NAND sub-system nb_update- Nand boot update program nboot - boot from NAND device nfs - boot image via network using NFS protocol nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables reginfo - print register information reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sf - SPI flash sub-system showvar - print local hushshell variables sleep - delay execution for some time source - run script from memory sspi - SPI utility command test - minimal test like /bin/sh tftpboot- boot image via network using TFTP protocol true - do nothing, successfully version - print monitor, compiler and linker version |