// SPDX-License-Identifier: GPL-2.0+

  /*
   * (C) Copyright 2001-2015
   * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   * Joe Hershberger, National Instruments

   * Copyright 2017 NXP
   *

   */
  
  #include <common.h>
  #include <dm.h>
  #include <environment.h>
  #include <net.h>
  #include <dm/device-internal.h>
  #include <dm/uclass-internal.h>
  #include "eth_internal.h"

  DECLARE_GLOBAL_DATA_PTR;

  /**
   * struct eth_device_priv - private structure for each Ethernet device
   *
   * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
   */
  struct eth_device_priv {
  	enum eth_state_t state;
  };
  
  /**
   * struct eth_uclass_priv - The structure attached to the uclass itself
   *
   * @current: The Ethernet device that the network functions are using
   */
  struct eth_uclass_priv {
  	struct udevice *current;
  };
  
  /* eth_errno - This stores the most recent failure code from DM functions */
  static int eth_errno;
  
  static struct eth_uclass_priv *eth_get_uclass_priv(void)
  {
  	struct uclass *uc;

  	int ret;
  
  	ret = uclass_get(UCLASS_ETH, &uc);
  	if (ret)
  		return NULL;

  	assert(uc);
  	return uc->priv;
  }
  
  void eth_set_current_to_next(void)
  {
  	struct eth_uclass_priv *uc_priv;
  
  	uc_priv = eth_get_uclass_priv();
  	if (uc_priv->current)
  		uclass_next_device(&uc_priv->current);
  	if (!uc_priv->current)
  		uclass_first_device(UCLASS_ETH, &uc_priv->current);
  }
  
  /*
   * Typically this will simply return the active device.
   * In the case where the most recent active device was unset, this will attempt
   * to return the first device. If that device doesn't exist or fails to probe,
   * this function will return NULL.
   */
  struct udevice *eth_get_dev(void)
  {
  	struct eth_uclass_priv *uc_priv;
  
  	uc_priv = eth_get_uclass_priv();
  	if (!uc_priv->current)
  		eth_errno = uclass_first_device(UCLASS_ETH,
  				    &uc_priv->current);
  	return uc_priv->current;
  }
  
  /*
   * Typically this will just store a device pointer.
   * In case it was not probed, we will attempt to do so.
   * dev may be NULL to unset the active device.
   */
  void eth_set_dev(struct udevice *dev)
  {
  	if (dev && !device_active(dev)) {
  		eth_errno = device_probe(dev);
  		if (eth_errno)
  			dev = NULL;
  	}
  
  	eth_get_uclass_priv()->current = dev;
  }
  
  /*
   * Find the udevice that either has the name passed in as devname or has an
   * alias named devname.
   */
  struct udevice *eth_get_dev_by_name(const char *devname)
  {
  	int seq = -1;
  	char *endp = NULL;
  	const char *startp = NULL;
  	struct udevice *it;
  	struct uclass *uc;
  	int len = strlen("eth");

  	int ret;

  
  	/* Must be longer than 3 to be an alias */
  	if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
  		startp = devname + len;
  		seq = simple_strtoul(startp, &endp, 10);
  	}

  	ret = uclass_get(UCLASS_ETH, &uc);
  	if (ret)
  		return NULL;

  	uclass_foreach_dev(it, uc) {
  		/*
  		 * We need the seq to be valid, so try to probe it.
  		 * If the probe fails, the seq will not match since it will be
  		 * -1 instead of what we are looking for.
  		 * We don't care about errors from probe here. Either they won't
  		 * match an alias or it will match a literal name and we'll pick
  		 * up the error when we try to probe again in eth_set_dev().
  		 */
  		if (device_probe(it))
  			continue;
  		/* Check for the name or the sequence number to match */
  		if (strcmp(it->name, devname) == 0 ||
  		    (endp > startp && it->seq == seq))
  			return it;
  	}
  
  	return NULL;
  }
  
  unsigned char *eth_get_ethaddr(void)
  {
  	struct eth_pdata *pdata;
  
  	if (eth_get_dev()) {
  		pdata = eth_get_dev()->platdata;
  		return pdata->enetaddr;
  	}
  
  	return NULL;
  }
  
  /* Set active state without calling start on the driver */
  int eth_init_state_only(void)
  {
  	struct udevice *current;
  	struct eth_device_priv *priv;
  
  	current = eth_get_dev();
  	if (!current || !device_active(current))
  		return -EINVAL;
  
  	priv = current->uclass_priv;
  	priv->state = ETH_STATE_ACTIVE;
  
  	return 0;
  }
  
  /* Set passive state without calling stop on the driver */
  void eth_halt_state_only(void)
  {
  	struct udevice *current;
  	struct eth_device_priv *priv;
  
  	current = eth_get_dev();
  	if (!current || !device_active(current))
  		return;
  
  	priv = current->uclass_priv;
  	priv->state = ETH_STATE_PASSIVE;
  }
  
  int eth_get_dev_index(void)
  {
  	if (eth_get_dev())
  		return eth_get_dev()->seq;
  	return -1;
  }
  
  static int eth_write_hwaddr(struct udevice *dev)
  {

  	struct eth_pdata *pdata;

  	int ret = 0;
  
  	if (!dev || !device_active(dev))
  		return -EINVAL;
  
  	/* seq is valid since the device is active */
  	if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {

  		pdata = dev->platdata;

  		if (!is_valid_ethaddr(pdata->enetaddr)) {
  			printf("
  Error: %s address %pM illegal value
  ",
  			       dev->name, pdata->enetaddr);
  			return -EINVAL;
  		}
  
  		/*
  		 * Drivers are allowed to decide not to implement this at
  		 * run-time. E.g. Some devices may use it and some may not.
  		 */
  		ret = eth_get_ops(dev)->write_hwaddr(dev);
  		if (ret == -ENOSYS)
  			ret = 0;
  		if (ret)
  			printf("
  Warning: %s failed to set MAC address
  ",
  			       dev->name);
  	}
  
  	return ret;
  }
  
  static int on_ethaddr(const char *name, const char *value, enum env_op op,
  	int flags)
  {
  	int index;
  	int retval;
  	struct udevice *dev;
  
  	/* look for an index after "eth" */
  	index = simple_strtoul(name + 3, NULL, 10);
  
  	retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
  	if (!retval) {
  		struct eth_pdata *pdata = dev->platdata;
  		switch (op) {
  		case env_op_create:
  		case env_op_overwrite:
  			eth_parse_enetaddr(value, pdata->enetaddr);

  			eth_write_hwaddr(dev);

  			break;
  		case env_op_delete:

  			memset(pdata->enetaddr, 0, ARP_HLEN);

  		}
  	}
  
  	return 0;
  }
  U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
  
  int eth_init(void)
  {

  	char *ethact = env_get("ethact");
  	char *ethrotate = env_get("ethrotate");

  	struct udevice *current = NULL;
  	struct udevice *old_current;
  	int ret = -ENODEV;
  
  	/*
  	 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
  	 * is already set to an ethernet device, we should stick to 'ethact'.
  	 */
  	if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
  		if (ethact) {
  			current = eth_get_dev_by_name(ethact);
  			if (!current)
  				return -EINVAL;
  		}
  	}
  
  	if (!current) {
  		current = eth_get_dev();
  		if (!current) {
  			printf("No ethernet found.
  ");
  			return -ENODEV;
  		}
  	}
  
  	old_current = current;
  	do {
  		if (current) {
  			debug("Trying %s
  ", current->name);
  
  			if (device_active(current)) {
  				ret = eth_get_ops(current)->start(current);
  				if (ret >= 0) {
  					struct eth_device_priv *priv =
  						current->uclass_priv;
  
  					priv->state = ETH_STATE_ACTIVE;
  					return 0;
  				}
  			} else {
  				ret = eth_errno;
  			}
  
  			debug("FAIL
  ");
  		} else {
  			debug("PROBE FAIL
  ");
  		}
  
  		/*
  		 * If ethrotate is enabled, this will change "current",
  		 * otherwise we will drop out of this while loop immediately
  		 */
  		eth_try_another(0);
  		/* This will ensure the new "current" attempted to probe */
  		current = eth_get_dev();
  	} while (old_current != current);
  
  	return ret;
  }
  
  void eth_halt(void)
  {
  	struct udevice *current;
  	struct eth_device_priv *priv;
  
  	current = eth_get_dev();

  	if (!current || !eth_is_active(current))

  		return;
  
  	eth_get_ops(current)->stop(current);
  	priv = current->uclass_priv;

  	if (priv)
  		priv->state = ETH_STATE_PASSIVE;

  }
  
  int eth_is_active(struct udevice *dev)
  {
  	struct eth_device_priv *priv;
  
  	if (!dev || !device_active(dev))
  		return 0;
  
  	priv = dev_get_uclass_priv(dev);
  	return priv->state == ETH_STATE_ACTIVE;
  }
  
  int eth_send(void *packet, int length)
  {
  	struct udevice *current;
  	int ret;
  
  	current = eth_get_dev();
  	if (!current)
  		return -ENODEV;

  	if (!eth_is_active(current))

  		return -EINVAL;
  
  	ret = eth_get_ops(current)->send(current, packet, length);
  	if (ret < 0) {
  		/* We cannot completely return the error at present */
  		debug("%s: send() returned error %d
  ", __func__, ret);
  	}
  	return ret;
  }
  
  int eth_rx(void)
  {
  	struct udevice *current;
  	uchar *packet;
  	int flags;
  	int ret;
  	int i;
  
  	current = eth_get_dev();
  	if (!current)
  		return -ENODEV;

  	if (!eth_is_active(current))

  		return -EINVAL;
  
  	/* Process up to 32 packets at one time */
  	flags = ETH_RECV_CHECK_DEVICE;
  	for (i = 0; i < 32; i++) {
  		ret = eth_get_ops(current)->recv(current, flags, &packet);
  		flags = 0;
  		if (ret > 0)
  			net_process_received_packet(packet, ret);
  		if (ret >= 0 && eth_get_ops(current)->free_pkt)
  			eth_get_ops(current)->free_pkt(current, packet, ret);
  		if (ret <= 0)
  			break;
  	}
  	if (ret == -EAGAIN)
  		ret = 0;
  	if (ret < 0) {
  		/* We cannot completely return the error at present */
  		debug("%s: recv() returned error %d
  ", __func__, ret);
  	}
  	return ret;
  }
  
  int eth_initialize(void)
  {
  	int num_devices = 0;
  	struct udevice *dev;
  
  	eth_common_init();
  
  	/*
  	 * Devices need to write the hwaddr even if not started so that Linux
  	 * will have access to the hwaddr that u-boot stored for the device.
  	 * This is accomplished by attempting to probe each device and calling
  	 * their write_hwaddr() operation.
  	 */

  	uclass_first_device_check(UCLASS_ETH, &dev);

  	if (!dev) {
  		printf("No ethernet found.
  ");
  		bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
  	} else {

  		char *ethprime = env_get("ethprime");

  		struct udevice *prime_dev = NULL;
  
  		if (ethprime)
  			prime_dev = eth_get_dev_by_name(ethprime);
  		if (prime_dev) {
  			eth_set_dev(prime_dev);
  			eth_current_changed();
  		} else {
  			eth_set_dev(NULL);
  		}
  
  		bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
  		do {
  			if (num_devices)
  				printf(", ");
  
  			printf("eth%d: %s", dev->seq, dev->name);
  
  			if (ethprime && dev == prime_dev)
  				printf(" [PRIME]");
  
  			eth_write_hwaddr(dev);

  			uclass_next_device_check(&dev);

  			num_devices++;
  		} while (dev);
  
  		putc('
  ');
  	}
  
  	return num_devices;
  }
  
  static int eth_post_bind(struct udevice *dev)
  {
  	if (strchr(dev->name, ' ')) {
  		printf("
  Error: eth device name \"%s\" has a space!
  ",
  		       dev->name);
  		return -EINVAL;
  	}
  
  	return 0;
  }
  
  static int eth_pre_unbind(struct udevice *dev)
  {
  	/* Don't hang onto a pointer that is going away */
  	if (dev == eth_get_uclass_priv()->current)
  		eth_set_dev(NULL);
  
  	return 0;
  }
  
  static int eth_post_probe(struct udevice *dev)
  {
  	struct eth_device_priv *priv = dev->uclass_priv;
  	struct eth_pdata *pdata = dev->platdata;

  	unsigned char env_enetaddr[ARP_HLEN];

  
  #if defined(CONFIG_NEEDS_MANUAL_RELOC)
  	struct eth_ops *ops = eth_get_ops(dev);
  	static int reloc_done;
  
  	if (!reloc_done) {
  		if (ops->start)
  			ops->start += gd->reloc_off;
  		if (ops->send)
  			ops->send += gd->reloc_off;
  		if (ops->recv)
  			ops->recv += gd->reloc_off;
  		if (ops->free_pkt)
  			ops->free_pkt += gd->reloc_off;
  		if (ops->stop)
  			ops->stop += gd->reloc_off;

  		if (ops->mcast)
  			ops->mcast += gd->reloc_off;

  		if (ops->write_hwaddr)
  			ops->write_hwaddr += gd->reloc_off;
  		if (ops->read_rom_hwaddr)
  			ops->read_rom_hwaddr += gd->reloc_off;
  
  		reloc_done++;
  	}
  #endif
  
  	priv->state = ETH_STATE_INIT;
  
  	/* Check if the device has a MAC address in ROM */
  	if (eth_get_ops(dev)->read_rom_hwaddr)
  		eth_get_ops(dev)->read_rom_hwaddr(dev);

  	eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);

  	if (!is_zero_ethaddr(env_enetaddr)) {
  		if (!is_zero_ethaddr(pdata->enetaddr) &&

  		    memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {

  			printf("
  Warning: %s MAC addresses don't match:
  ",
  			       dev->name);

  			printf("Address in ROM is          %pM
  ",

  			       pdata->enetaddr);
  			printf("Address in environment is  %pM
  ",
  			       env_enetaddr);
  		}
  
  		/* Override the ROM MAC address */

  		memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);

  	} else if (is_valid_ethaddr(pdata->enetaddr)) {

  		eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);

  		printf("
  Warning: %s using MAC address from ROM
  ",
  		       dev->name);

  	} else if (is_zero_ethaddr(pdata->enetaddr) ||
  		   !is_valid_ethaddr(pdata->enetaddr)) {

  #ifdef CONFIG_NET_RANDOM_ETHADDR
  		net_random_ethaddr(pdata->enetaddr);
  		printf("
  Warning: %s (eth%d) using random MAC address - %pM
  ",
  		       dev->name, dev->seq, pdata->enetaddr);
  #else
  		printf("
  Error: %s address not set.
  ",
  		       dev->name);
  		return -EINVAL;
  #endif
  	}
  
  	return 0;
  }
  
  static int eth_pre_remove(struct udevice *dev)
  {
  	struct eth_pdata *pdata = dev->platdata;
  
  	eth_get_ops(dev)->stop(dev);
  
  	/* clear the MAC address */

  	memset(pdata->enetaddr, 0, ARP_HLEN);

  
  	return 0;
  }
  
  UCLASS_DRIVER(eth) = {
  	.name		= "eth",
  	.id		= UCLASS_ETH,
  	.post_bind	= eth_post_bind,
  	.pre_unbind	= eth_pre_unbind,
  	.post_probe	= eth_post_probe,
  	.pre_remove	= eth_pre_remove,
  	.priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
  	.per_device_auto_alloc_size = sizeof(struct eth_device_priv),
  	.flags		= DM_UC_FLAG_SEQ_ALIAS,
  };