From 7d861d95a315852532d581884b3b72536c25032c Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Tue, 5 Feb 2013 19:05:41 +0800 Subject: [PATCH] blackfin: bf609: add softswitch config command Add softswitch_output command for bf609-ezkit to enable softswitches. Signed-off-by: Bob Liu Signed-off-by: Sonic Zhang --- README | 1 + arch/blackfin/include/asm/soft_switch.h | 18 +++++++++++++++ board/bf609-ezkit/soft_switch.c | 11 +-------- board/bf609-ezkit/soft_switch.h | 25 +++++++++++++------- common/Makefile | 1 + common/cmd_softswitch.c | 41 +++++++++++++++++++++++++++++++++ include/configs/bf609-ezkit.h | 1 + 7 files changed, 80 insertions(+), 18 deletions(-) create mode 100644 arch/blackfin/include/asm/soft_switch.h create mode 100644 common/cmd_softswitch.c diff --git a/README b/README index 0d37d56..defdedb 100644 --- a/README +++ b/README @@ -898,6 +898,7 @@ The following options need to be configured: CONFIG_CMD_SF * Read/write/erase SPI NOR flash CONFIG_CMD_SHA1SUM print sha1 memory digest (requires CONFIG_CMD_MEMORY) + CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_TFTPSRV * TFTP transfer in server mode diff --git a/arch/blackfin/include/asm/soft_switch.h b/arch/blackfin/include/asm/soft_switch.h new file mode 100644 index 0000000..ff8e44d --- /dev/null +++ b/arch/blackfin/include/asm/soft_switch.h @@ -0,0 +1,18 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __SOFT_SWITCH_H__ +#define __SOFT_SWITCH_H__ + +#define IO_PORT_A 0 +#define IO_PORT_B 1 +#define IO_PORT_INPUT 0 +#define IO_PORT_OUTPUT 1 + +int config_switch_bit(int num, int port, int bit, int dir, uchar value); +#endif diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c index 2e1404f..e0c8d93 100644 --- a/board/bf609-ezkit/soft_switch.c +++ b/board/bf609-ezkit/soft_switch.c @@ -12,14 +12,6 @@ #include #include "soft_switch.h" -#define SWITCH_ADDR 0x21 - -#define NUM_SWITCH 3 -#define IODIRA 0x0 -#define IODIRB 0x1 -#define OLATA 0x14 -#define OLATB 0x15 - struct switch_config { uchar dir0; /* IODIRA */ uchar dir1; /* IODIRB */ @@ -126,9 +118,8 @@ static int setup_soft_switch(int addr, struct switch_config *config) return i2c_write(addr, IODIRB, 1, &config->dir1, 1); } -int config_switch_bit(int num, int port, int bit, int dir, uchar value) +int config_switch_bit(int addr, int port, int bit, int dir, uchar value) { - int addr = SWITCH_ADDR + num; int ret, data_reg, dir_reg; uchar tmp; diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h index 8da0e44..d147fe1 100644 --- a/board/bf609-ezkit/soft_switch.h +++ b/board/bf609-ezkit/soft_switch.h @@ -6,8 +6,10 @@ * Licensed under the GPL-2 or later. */ -#ifndef __SOFT_SWITCH_H__ -#define __SOFT_SWITCH_H__ +#ifndef __BOARD_SOFT_SWITCH_H__ +#define __BOARD_SOFT_SWITCH_H__ + +#include /* switch 0 port A */ #define CAN_EN 0x1 @@ -61,11 +63,18 @@ #define PD3_SPI0MOSI_EN 0x1 #define PD4_SPI0CK_EN 0x2 -#define IO_PORT_A 0 -#define IO_PORT_B 1 -#define IO_PORT_INPUT 0 -#define IO_PORT_OUTPUT 1 +#ifdef CONFIG_BFIN_BOARD_VERSION_1_0 +#define SWITCH_ADDR 0x21 +#else +#define SWITCH_ADDR 0x20 +#endif + +#define NUM_SWITCH 3 +#define IODIRA 0x0 +#define IODIRB 0x1 +#define OLATA 0x14 +#define OLATB 0x15 -int config_switch_bit(int num, int port, int bit, int dir, uchar value); int setup_board_switches(void); -#endif + +#endif /* __BOARD_SOFT_SWITCH_H__ */ diff --git a/common/Makefile b/common/Makefile index 0e0fff1..0429a3c 100644 --- a/common/Makefile +++ b/common/Makefile @@ -164,6 +164,7 @@ COBJS-$(CONFIG_CMD_SF) += cmd_sf.o COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o COBJS-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o +COBJS-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o COBJS-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o diff --git a/common/cmd_softswitch.c b/common/cmd_softswitch.c new file mode 100644 index 0000000..f75d926 --- /dev/null +++ b/common/cmd_softswitch.c @@ -0,0 +1,41 @@ +/* + * cmd_softswitch.c - set the softswitch for bf60x + * + * Copyright (c) 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int switchaddr, value, pin, port; + + if (argc != 5) + return CMD_RET_USAGE; + + if (strcmp(argv[2], "GPA") == 0) + port = IO_PORT_A; + else if (strcmp(argv[2], "GPB") == 0) + port = IO_PORT_B; + else + return CMD_RET_USAGE; + + switchaddr = simple_strtoul(argv[1], NULL, 16); + pin = simple_strtoul(argv[3], NULL, 16); + value = simple_strtoul(argv[4], NULL, 16); + + config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value); + + return 0; +} + +U_BOOT_CMD( + softswitch_output, 5, 1, do_softswitch, + "switchaddr GPA/GPB pin_offset value", + "" +); diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 8b90129..f0ac86b 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -144,6 +144,7 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SOFTSWITCH #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) #define CONFIG_BFIN_SOFT_SWITCH -- 1.9.1