Eric Lee / smarc-uboot

17
Download as
Browse Code ยป

Commit c8a3777c51b9e375d88e3a0dfa0141f1ac89df3a

Authored by Simon Glass
1 parent c8d7393b73
Exists in v2017.01-smarct4x and in 28 other branches 8qm-imx_v2020.04_5.4.70_2.3.0, emb_lf-6.6.52-2.2.0, emb_lf_v2022.04, emb_lf_v2023.04, emb_lf_v2024.04, pitx_8mp_lf_v2020.04, smarc-8m-android-10.0.0_2.6.0, smarc-8m-android-11.0.0_2.0.0, smarc-8mp-android-11.0.0_2.0.0, smarc-imx6_v2018.03_4.14.98_2.0.0_ga, smarc-imx7_v2017.03_4.9.11_1.0.0_ga, smarc-imx7_v2018.03_4.14.98_2.0.0_ga, smarc-imx_v2017.03_4.9.11_1.0.0_ga, smarc-imx_v2017.03_4.9.88_2.0.0_ga, smarc-imx_v2017.03_o8.1.0_1.3.0_8m, smarc-imx_v2018.03_4.14.78_1.0.0_ga, smarc-n7.1.2_2.0.0-ga, smarc_8m-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8m-imx_v2019.04_4.19.35_1.1.0, smarc_8m_00d0-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8mm-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8mm-imx_v2019.04_4.19.35_1.1.0, smarc_8mm-imx_v2020.04_5.4.24_2.1.0, smarc_8mp_lf_v2020.04, smarc_8mq-imx_v2020.04_5.4.24_2.1.0, smarc_8mq_lf_v2020.04, v2017.01-smarct3x, v2017.01-smarct3x-emmc

Drop the MAKEALL tool 

Buildman has been around for 3 years now. It has had a lot of use and
testing. Perhaps it is time to remove MAKEALL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Showing 1 changed file with 0 additions and 850 deletions Side-by-side Diff

1   -#!/bin/bash
2   -# Tool mainly for U-Boot Quality Assurance: build one or more board
3   -# configurations with minimal verbosity, showing only warnings and
4   -# errors.
5   -#
6   -# SPDX-License-Identifier: GPL-2.0+
7   -
8   -usage()
9   -{
10   - # if exiting with 0, write to stdout, else write to stderr
11   - local ret=${1:-0}
12   - [ "${ret}" -eq 1 ] && exec 1>&2
13   - cat <<-EOF
14   - Usage: MAKEALL [options] [--] [boards-to-build]
15   -
16   - Options:
17   - -a ARCH, --arch ARCH Build all boards with arch ARCH
18   - -c CPU, --cpu CPU Build all boards with cpu CPU
19   - -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR
20   - -s SOC, --soc SOC Build all boards with soc SOC
21   - -b BOARD, --board BOARD Build all boards with board name BOARD
22   - -l, --list List all targets to be built
23   - -m, --maintainers List all targets and maintainer email
24   - -M, --mails List all targets and all affilated emails
25   - -C, --check Enable build checking
26   - -n, --continue Continue (skip boards already built)
27   - -r, --rebuild-errors Rebuild any boards that errored
28   - -h, --help This help output
29   -
30   - Selections by these options are logically ANDed; if the same option
31   - is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
32   - will select all configurations where the vendor is either FOO or
33   - BAR. Any additional arguments specified on the command line are
34   - always build additionally. See the boards.cfg file for more info.
35   -
36   - If no boards are specified, then the default is "powerpc".
37   -
38   - Environment variables:
39   - BUILD_NCPUS number of parallel make jobs (default: auto)
40   - CROSS_COMPILE cross-compiler toolchain prefix (default: "")
41   - CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
42   - architecture "ARCH". Substitute "ARCH" for any
43   - supported architecture (default: "")
44   - MAKEALL_LOGDIR output all logs to here (default: ./LOG/)
45   - BUILD_DIR output build directory (default: ./)
46   - BUILD_NBUILDS number of parallel targets (default: 1)
47   -
48   - Examples:
49   - - build all Power Architecture boards:
50   - MAKEALL -a powerpc
51   - MAKEALL --arch powerpc
52   - MAKEALL powerpc
53   - - build all PowerPC boards manufactured by vendor "esd":
54   - MAKEALL -a powerpc -v esd
55   - - build all PowerPC boards manufactured either by "keymile" or "siemens":
56   - MAKEALL -a powerpc -v keymile -v siemens
57   - - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
58   - MAKEALL -c mpc83xx -v freescale 4xx
59   - EOF
60   - exit ${ret}
61   -}
62   -
63   -deprecation() {
64   - echo "** Note: MAKEALL is deprecated - please use buildman instead"
65   - echo "** See tools/buildman/README for details"
66   - echo
67   -}
68   -
69   -deprecation
70   -
71   -SHORT_OPTS="ha:c:v:s:b:lmMCnr"
72   -LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
73   -
74   -# Option processing based on util-linux-2.13/getopt-parse.bash
75   -
76   -# Note that we use `"$@"' to let each command-line parameter expand to a
77   -# separate word. The quotes around `$@' are essential!
78   -# We need TEMP as the `eval set --' would nuke the return value of
79   -# getopt.
80   -TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
81   - -n 'MAKEALL' -- "$@"`
82   -
83   -[ $? != 0 ] && usage 1
84   -
85   -# Note the quotes around `$TEMP': they are essential!
86   -eval set -- "$TEMP"
87   -
88   -SELECTED=''
89   -ONLY_LIST=''
90   -PRINT_MAINTS=''
91   -MAINTAINERS_ONLY=''
92   -CONTINUE=''
93   -REBUILD_ERRORS=''
94   -
95   -while true ; do
96   - case "$1" in
97   - -a|--arch)
98   - # echo "Option ARCH: argument \`$2'"
99   - if [ "$opt_a" ] ; then
100   - opt_a="${opt_a%)} || \$2 == \"$2\")"
101   - else
102   - opt_a="(\$2 == \"$2\")"
103   - fi
104   - SELECTED='y'
105   - shift 2 ;;
106   - -c|--cpu)
107   - # echo "Option CPU: argument \`$2'"
108   - if [ "$opt_c" ] ; then
109   - opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
110   - else
111   - opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
112   - fi
113   - SELECTED='y'
114   - shift 2 ;;
115   - -s|--soc)
116   - # echo "Option SoC: argument \`$2'"
117   - if [ "$opt_s" ] ; then
118   - opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
119   - else
120   - opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
121   - fi
122   - SELECTED='y'
123   - shift 2 ;;
124   - -v|--vendor)
125   - # echo "Option VENDOR: argument \`$2'"
126   - if [ "$opt_v" ] ; then
127   - opt_v="${opt_v%)} || \$5 == \"$2\")"
128   - else
129   - opt_v="(\$5 == \"$2\")"
130   - fi
131   - SELECTED='y'
132   - shift 2 ;;
133   - -b|--board)
134   - # echo "Option BOARD: argument \`$2'"
135   - if [ "$opt_b" ] ; then
136   - opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
137   - else
138   - # We need to check the 7th field too
139   - # for boards whose 6th field is "-"
140   - opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
141   - fi
142   - SELECTED='y'
143   - shift 2 ;;
144   - -C|--check)
145   - CHECK='C=1'
146   - shift ;;
147   - -n|--continue)
148   - CONTINUE='y'
149   - shift ;;
150   - -r|--rebuild-errors)
151   - REBUILD_ERRORS='y'
152   - shift ;;
153   - -l|--list)
154   - ONLY_LIST='y'
155   - shift ;;
156   - -m|--maintainers)
157   - ONLY_LIST='y'
158   - PRINT_MAINTS='y'
159   - MAINTAINERS_ONLY='y'
160   - shift ;;
161   - -M|--mails)
162   - ONLY_LIST='y'
163   - PRINT_MAINTS='y'
164   - shift ;;
165   - -h|--help)
166   - usage ;;
167   - --)
168   - shift ; break ;;
169   - *)
170   - echo "Internal error!" >&2 ; exit 1 ;;
171   - esac
172   -done
173   -
174   -GNU_MAKE=$(scripts/show-gnu-make) || {
175   - echo "GNU Make not found" >&2
176   - exit 1
177   -}
178   -
179   -# echo "Remaining arguments:"
180   -# for arg do echo '--> '"\`$arg'" ; done
181   -
182   -tools/genboardscfg.py || {
183   - echo "Failed to generate boards.cfg" >&2
184   - exit 1
185   -}
186   -
187   -FILTER="\$1 !~ /^#/"
188   -[ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
189   -[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
190   -[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
191   -[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
192   -[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
193   -
194   -if [ "$SELECTED" ] ; then
195   - SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
196   -
197   - # Make sure some boards from boards.cfg are actually found
198   - if [ -z "$SELECTED" ] ; then
199   - echo "Error: No boards selected, invalid arguments"
200   - exit 1
201   - fi
202   -fi
203   -
204   -#########################################################################
205   -
206   -# Print statistics when we exit
207   -trap exit 1 2 3 15
208   -trap print_stats 0
209   -
210   -# Determine number of CPU cores if no default was set
211   -: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
212   -
213   -if [ "$BUILD_NCPUS" -gt 1 ]
214   -then
215   - JOBS="-j $((BUILD_NCPUS + 1))"
216   -else
217   - JOBS=""
218   -fi
219   -
220   -if [ "${MAKEALL_LOGDIR}" ] ; then
221   - LOG_DIR=${MAKEALL_LOGDIR}
222   -else
223   - LOG_DIR="LOG"
224   -fi
225   -
226   -: ${BUILD_NBUILDS:=1}
227   -BUILD_MANY=0
228   -
229   -if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
230   - BUILD_MANY=1
231   - : ${BUILD_DIR:=./build}
232   - mkdir -p "${BUILD_DIR}/ERR"
233   - find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
234   -fi
235   -
236   -: ${BUILD_DIR:=.}
237   -
238   -OUTPUT_PREFIX="${BUILD_DIR}"
239   -
240   -[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
241   -if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
242   - find "${LOG_DIR}/" -type f -exec rm -f {} +
243   -fi
244   -
245   -LIST=""
246   -
247   -# Keep track of the number of builds and errors
248   -ERR_CNT=0
249   -ERR_LIST=""
250   -WRN_CNT=0
251   -WRN_LIST=""
252   -TOTAL_CNT=0
253   -SKIP_CNT=0
254   -CURRENT_CNT=0
255   -OLDEST_IDX=1
256   -RC=0
257   -
258   -# Helper funcs for parsing boards.cfg
259   -targets_by_field()
260   -{
261   - field=$1
262   - regexp=$2
263   -
264   - awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
265   - boards.cfg
266   -}
267   -
268   -targets_by_arch() { targets_by_field 2 "$@" ; }
269   -targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
270   -targets_by_soc() { targets_by_field 4 "$@" ; }
271   -
272   -#########################################################################
273   -## MPC5xx Systems
274   -#########################################################################
275   -
276   -LIST_5xx="$(targets_by_cpu mpc5xx)"
277   -
278   -#########################################################################
279   -## MPC5xxx Systems
280   -#########################################################################
281   -
282   -LIST_5xxx="$(targets_by_cpu mpc5xxx)"
283   -
284   -#########################################################################
285   -## MPC512x Systems
286   -#########################################################################
287   -
288   -LIST_512x="$(targets_by_cpu mpc512x)"
289   -
290   -#########################################################################
291   -## MPC8xx Systems
292   -#########################################################################
293   -
294   -LIST_8xx="$(targets_by_cpu mpc8xx)"
295   -
296   -#########################################################################
297   -## PPC4xx Systems
298   -#########################################################################
299   -
300   -LIST_4xx="$(targets_by_cpu ppc4xx)"
301   -
302   -#########################################################################
303   -## MPC8260 Systems (includes 8250, 8255 etc.)
304   -#########################################################################
305   -
306   -LIST_8260="$(targets_by_cpu mpc8260)"
307   -
308   -#########################################################################
309   -## MPC83xx Systems (includes 8349, etc.)
310   -#########################################################################
311   -
312   -LIST_83xx="$(targets_by_cpu mpc83xx)"
313   -
314   -#########################################################################
315   -## MPC85xx Systems (includes 8540, 8560 etc.)
316   -#########################################################################
317   -
318   -LIST_85xx="$(targets_by_cpu mpc85xx)"
319   -
320   -#########################################################################
321   -## MPC86xx Systems
322   -#########################################################################
323   -
324   -LIST_86xx="$(targets_by_cpu mpc86xx)"
325   -
326   -#########################################################################
327   -## PowerPC groups
328   -#########################################################################
329   -
330   -LIST_TSEC=" \
331   - ${LIST_83xx} \
332   - ${LIST_85xx} \
333   - ${LIST_86xx} \
334   -"
335   -
336   -LIST_powerpc=" \
337   - ${LIST_5xx} \
338   - ${LIST_512x} \
339   - ${LIST_5xxx} \
340   - ${LIST_8xx} \
341   - ${LIST_824x} \
342   - ${LIST_8260} \
343   - ${LIST_83xx} \
344   - ${LIST_85xx} \
345   - ${LIST_86xx} \
346   - ${LIST_4xx} \
347   -"
348   -
349   -# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
350   -# still using "ppc" instead of "powerpc"
351   -LIST_ppc=" \
352   - ${LIST_powerpc} \
353   -"
354   -
355   -#########################################################################
356   -## StrongARM Systems
357   -#########################################################################
358   -
359   -LIST_SA="$(targets_by_cpu sa1100)"
360   -
361   -#########################################################################
362   -## ARM7 Systems
363   -#########################################################################
364   -
365   -LIST_ARM7="$(targets_by_cpu arm720t)"
366   -
367   -#########################################################################
368   -## ARM9 Systems
369   -#########################################################################
370   -
371   -LIST_ARM9="$(targets_by_cpu arm920t) \
372   - $(targets_by_cpu arm926ejs) \
373   - $(targets_by_cpu arm946es) \
374   -"
375   -
376   -#########################################################################
377   -## ARM11 Systems
378   -#########################################################################
379   -LIST_ARM11="$(targets_by_cpu arm1136) \
380   - $(targets_by_cpu arm1176) \
381   -"
382   -
383   -#########################################################################
384   -## ARMV7 Systems
385   -#########################################################################
386   -
387   -LIST_ARMV7="$(targets_by_cpu armv7)"
388   -
389   -#########################################################################
390   -## ARMV8 Systems
391   -#########################################################################
392   -
393   -LIST_ARMV8="$(targets_by_cpu armv8)"
394   -
395   -#########################################################################
396   -## AT91 Systems
397   -#########################################################################
398   -
399   -LIST_at91="$(targets_by_soc at91)"
400   -
401   -#########################################################################
402   -## Xscale Systems
403   -#########################################################################
404   -
405   -LIST_pxa="$(targets_by_cpu pxa)"
406   -
407   -#########################################################################
408   -## SPEAr Systems
409   -#########################################################################
410   -
411   -LIST_spear="$(targets_by_soc spear)"
412   -
413   -#########################################################################
414   -## ARM groups
415   -#########################################################################
416   -
417   -LIST_arm="$(targets_by_arch arm | \
418   - for ARMV8_TARGET in $LIST_ARMV8; \
419   - do sed "/$ARMV8_TARGET/d"; \
420   - done) \
421   -"
422   -
423   -#########################################################################
424   -## MIPS Systems (default = big endian)
425   -#########################################################################
426   -
427   -LIST_mips="$(targets_by_arch mips)"
428   -
429   -#########################################################################
430   -## OpenRISC Systems
431   -#########################################################################
432   -
433   -LIST_openrisc="$(targets_by_arch openrisc)"
434   -
435   -#########################################################################
436   -## x86 Systems
437   -#########################################################################
438   -
439   -LIST_x86="$(targets_by_arch x86)"
440   -
441   -#########################################################################
442   -## Nios-II Systems
443   -#########################################################################
444   -
445   -LIST_nios2="$(targets_by_arch nios2)"
446   -
447   -#########################################################################
448   -## MicroBlaze Systems
449   -#########################################################################
450   -
451   -LIST_microblaze="$(targets_by_arch microblaze)"
452   -
453   -#########################################################################
454   -## ColdFire Systems
455   -#########################################################################
456   -
457   -LIST_m68k="$(targets_by_arch m68k)"
458   -LIST_coldfire=${LIST_m68k}
459   -
460   -#########################################################################
461   -## AVR32 Systems
462   -#########################################################################
463   -
464   -LIST_avr32="$(targets_by_arch avr32)"
465   -
466   -#########################################################################
467   -## Blackfin Systems
468   -#########################################################################
469   -
470   -LIST_blackfin="$(targets_by_arch blackfin)"
471   -
472   -#########################################################################
473   -## SH Systems
474   -#########################################################################
475   -
476   -LIST_sh2="$(targets_by_cpu sh2)"
477   -LIST_sh3="$(targets_by_cpu sh3)"
478   -LIST_sh4="$(targets_by_cpu sh4)"
479   -
480   -LIST_sh="$(targets_by_arch sh)"
481   -
482   -#########################################################################
483   -## SPARC Systems
484   -#########################################################################
485   -
486   -LIST_sparc="$(targets_by_arch sparc)"
487   -
488   -#########################################################################
489   -## NDS32 Systems
490   -#########################################################################
491   -
492   -LIST_nds32="$(targets_by_arch nds32)"
493   -
494   -#########################################################################
495   -## ARC Systems
496   -#########################################################################
497   -
498   -LIST_arc="$(targets_by_arch arc)"
499   -
500   -#-----------------------------------------------------------------------
501   -
502   -get_target_location() {
503   - local target=$1
504   - local BOARD_NAME=""
505   - local CONFIG_NAME=""
506   - local board=""
507   - local vendor=""
508   -
509   - # Automatic mode
510   - local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
511   - if [ -z "${line}" ] ; then echo "" ; return ; fi
512   -
513   - set ${line}
514   -
515   - CONFIG_NAME="${7%_defconfig}"
516   -
517   - [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}"
518   -
519   - if [ $# -gt 5 ]; then
520   - if [ "$6" = "-" ] ; then
521   - board=${BOARD_NAME}
522   - else
523   - board="$6"
524   - fi
525   - fi
526   -
527   - [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
528   - [ $# -gt 6 ] && [ "$8" != "-" ] && {
529   - tmp="${8%:*}"
530   - if [ "$tmp" ] ; then
531   - CONFIG_NAME="$tmp"
532   - fi
533   - }
534   -
535   - # Assign board directory to BOARDIR variable
536   - if [ "${vendor}" == "-" ] ; then
537   - BOARDDIR=${board}
538   - else
539   - BOARDDIR=${vendor}/${board}
540   - fi
541   -
542   - echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
543   -}
544   -
545   -get_target_maintainers() {
546   - local name=`echo $1 | cut -d : -f 3`
547   -
548   - local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
549   - if [ -z "${line}" ]; then
550   - echo ""
551   - return ;
552   - fi
553   -
554   - local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
555   - [ "$mails" == "-" ] && mails=""
556   - echo "$mails"
557   -}
558   -
559   -get_target_arch() {
560   - local target=$1
561   -
562   - awk '$7 == "'$target'" { print $2 }' boards.cfg
563   -}
564   -
565   -list_target() {
566   - if [ "$PRINT_MAINTS" != 'y' ] ; then
567   - echo "$1"
568   - return
569   - fi
570   -
571   - echo -n "$1:"
572   -
573   - local loc=`get_target_location $1`
574   -
575   - if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
576   -
577   - local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
578   -
579   - if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
580   -
581   - local dir=`echo ${loc} | cut -d ":" -f 2`
582   - local cfg=`echo ${loc} | cut -d ":" -f 1`
583   - local git_result=`git log --format=%aE board/${dir} \
584   - include/configs/${cfg}.h | grep "@"`
585   - local git_result_recent=`echo ${git_result} | tr " " "\n" | \
586   - head -n 3`
587   - local git_result_top=`echo ${git_result} | tr " " "\n" | \
588   - sort | uniq -c | sort -nr | head -n 3 | \
589   - sed "s/^ \+[0-9]\+ \+//"`
590   -
591   - echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
592   - sort -u | tr "\n" " " | sed "s/ $//" ;
593   - else
594   - echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
595   - sed "s/ $//" ;
596   - fi
597   -
598   - echo ""
599   -}
600   -
601   -# Each finished build will have a file called ${donep}${n},
602   -# where n is the index of the build. Each build
603   -# we've already noted as finished will have ${skipp}${n}.
604   -# The code managing the build process will use this information
605   -# to ensure that only BUILD_NBUILDS builds are in flight at once
606   -donep="${LOG_DIR}/._done_"
607   -skipp="${LOG_DIR}/._skip_"
608   -
609   -build_target_killed() {
610   - echo "Aborted $target build."
611   - # Remove the logs for this board since it was aborted
612   - rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
613   - exit
614   -}
615   -
616   -build_target() {
617   - target=$1
618   - build_idx=$2
619   -
620   - if [ "$ONLY_LIST" == 'y' ] ; then
621   - list_target ${target}
622   - return
623   - fi
624   -
625   - if [ $BUILD_MANY == 1 ] ; then
626   - output_dir="${OUTPUT_PREFIX}/${target}"
627   - mkdir -p "${output_dir}"
628   - trap build_target_killed TERM
629   - else
630   - output_dir="${OUTPUT_PREFIX}"
631   - fi
632   -
633   - target_arch=$(get_target_arch ${target})
634   - eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
635   - if [ "${cross_toolchain}" ] ; then
636   - MAKE="$GNU_MAKE CROSS_COMPILE=${cross_toolchain}"
637   - elif [ "${CROSS_COMPILE}" ] ; then
638   - MAKE="$GNU_MAKE CROSS_COMPILE=${CROSS_COMPILE}"
639   - else
640   - MAKE=$GNU_MAKE
641   - fi
642   -
643   - if [ "${output_dir}" != "." ] ; then
644   - MAKE="${MAKE} O=${output_dir}"
645   - fi
646   -
647   - ${MAKE} mrproper >/dev/null
648   -
649   - echo "Building ${target} board..."
650   - ${MAKE} -s ${target}_defconfig >/dev/null
651   -
652   - ${MAKE} ${JOBS} ${CHECK} all \
653   - >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
654   -
655   - # Check for 'make' errors
656   - if [ ${PIPESTATUS[0]} -ne 0 ] ; then
657   - RC=1
658   - fi
659   -
660   - OBJS=${output_dir}/u-boot
661   - if [ -e ${output_dir}/spl/u-boot-spl ]; then
662   - OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
663   - fi
664   -
665   - ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
666   -
667   - if [ $BUILD_MANY == 1 ] ; then
668   - trap - TERM
669   -
670   - ${MAKE} -s clean
671   -
672   - if [ -s ${LOG_DIR}/${target}.ERR ] ; then
673   - cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
674   - else
675   - rm ${LOG_DIR}/${target}.ERR
676   - fi
677   - else
678   - if [ -s ${LOG_DIR}/${target}.ERR ] ; then
679   - if grep -iw error ${LOG_DIR}/${target}.ERR ; then
680   - : $(( ERR_CNT += 1 ))
681   - ERR_LIST="${ERR_LIST} $target"
682   - else
683   - : $(( WRN_CNT += 1 ))
684   - WRN_LIST="${WRN_LIST} $target"
685   - fi
686   - else
687   - rm ${LOG_DIR}/${target}.ERR
688   - fi
689   - fi
690   -
691   - [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
692   -
693   - touch "${donep}${build_idx}"
694   -}
695   -
696   -manage_builds() {
697   - search_idx=${OLDEST_IDX}
698   - if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
699   -
700   - while true; do
701   - if [ -e "${donep}${search_idx}" ] ; then
702   - : $(( CURRENT_CNT-- ))
703   - [ ${OLDEST_IDX} -eq ${search_idx} ] &&
704   - : $(( OLDEST_IDX++ ))
705   -
706   - # Only want to count it once
707   - rm -f "${donep}${search_idx}"
708   - touch "${skipp}${search_idx}"
709   - elif [ -e "${skipp}${search_idx}" ] ; then
710   - [ ${OLDEST_IDX} -eq ${search_idx} ] &&
711   - : $(( OLDEST_IDX++ ))
712   - fi
713   - : $(( search_idx++ ))
714   - if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
715   - if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
716   - search_idx=${OLDEST_IDX}
717   - sleep 1
718   - else
719   - break
720   - fi
721   - fi
722   - done
723   -}
724   -
725   -build_targets() {
726   - for t in "$@" ; do
727   - # If a LIST_xxx var exists, use it. But avoid variable
728   - # expansion in the eval when a board name contains certain
729   - # characters that the shell interprets.
730   - case ${t} in
731   - *[-+=]*) list= ;;
732   - *) list=$(eval echo '${LIST_'$t'}') ;;
733   - esac
734   - if [ -n "${list}" ] ; then
735   - build_targets ${list}
736   - else
737   - : $((TOTAL_CNT += 1))
738   - : $((CURRENT_CNT += 1))
739   - rm -f "${donep}${TOTAL_CNT}"
740   - rm -f "${skipp}${TOTAL_CNT}"
741   - if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
742   - : $((SKIP_CNT += 1))
743   - touch "${donep}${TOTAL_CNT}"
744   - elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
745   - : $((SKIP_CNT += 1))
746   - touch "${donep}${TOTAL_CNT}"
747   - else
748   - if [ $BUILD_MANY == 1 ] ; then
749   - build_target ${t} ${TOTAL_CNT} &
750   - else
751   - CUR_TGT="${t}"
752   - build_target ${t} ${TOTAL_CNT}
753   - CUR_TGT=''
754   - fi
755   - fi
756   - fi
757   -
758   - # We maintain a running count of all the builds we have done.
759   - # Each finished build will have a file called ${donep}${n},
760   - # where n is the index of the build. Each build
761   - # we've already noted as finished will have ${skipp}${n}.
762   - # We track the current index via TOTAL_CNT, and the oldest
763   - # index. When we exceed the maximum number of parallel builds,
764   - # We look from oldest to current for builds that have completed,
765   - # and update the current count and oldest index as appropriate.
766   - # If we've gone through the entire list, wait a second, and
767   - # reprocess the entire list until we find a build that has
768   - # completed
769   - if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
770   - manage_builds
771   - fi
772   - done
773   -}
774   -
775   -#-----------------------------------------------------------------------
776   -
777   -kill_children() {
778   - local OS=$(uname -s)
779   - local children=""
780   - case "${OS}" in
781   - "Darwin")
782   - # Mac OS X is known to have BSD style ps
783   - local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
784   - children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
785   - ;;
786   - *)
787   - # everything else tries the GNU style
788   - local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
789   - children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
790   - ;;
791   - esac
792   -
793   - kill $children 2> /dev/null
794   - wait $children 2> /dev/null
795   -
796   - exit
797   -}
798   -
799   -print_stats() {
800   - if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
801   -
802   - # Only count boards that completed
803   - : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
804   -
805   - rm -f ${donep}* ${skipp}*
806   -
807   - if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
808   - ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
809   - ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
810   - ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
811   - WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
812   - WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
813   - WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
814   - else
815   - # Remove the logs for any board that was interrupted
816   - rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
817   - fi
818   -
819   - : $((TOTAL_CNT -= ${SKIP_CNT}))
820   - echo ""
821   - echo "--------------------- SUMMARY ----------------------------"
822   - if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
823   - echo "Boards skipped: ${SKIP_CNT}"
824   - fi
825   - echo "Boards compiled: ${TOTAL_CNT}"
826   - if [ ${ERR_CNT} -gt 0 ] ; then
827   - echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
828   - fi
829   - if [ ${WRN_CNT} -gt 0 ] ; then
830   - echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
831   - fi
832   - echo "----------------------------------------------------------"
833   -
834   - if [ $BUILD_MANY == 1 ] ; then
835   - kill_children
836   - fi
837   -
838   - deprecation
839   -
840   - exit $RC
841   -}
842   -
843   -#-----------------------------------------------------------------------
844   -
845   -# Build target groups selected by options, plus any command line args
846   -set -- ${SELECTED} "$@"
847   -# run PowerPC by default
848   -[ $# = 0 ] && set -- powerpc
849   -build_targets "$@"
850   -wait