Eric Lee / smarc-uboot

06 Oct, 2018

1 commit

  • 6c6add602   configs: drop CONFIG_SYS_EXTRA_ENV_RELOC ... Browse Code »

    Instead of manually specifying CONFIG_SYS_EXTRA_ENV_RELOC
    for every board that needs it, it shouldn't hurt to let
    initr_reloc_global_data() always relocate gd->env_addr
    unless we know this pointer is outside the initial binary.

    To achieve this, the relocation is omitted if
    CONFIG_ENV_ADDR is defined (and ENV_IS_EMBEDDED is not).

    Signed-off-by: Simon Goldschmidt

    Simon Goldschmidt
     

18 Aug, 2018

1 commit

23 Jul, 2018

1 commit

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    60

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

2 commits

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    15

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    17

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

04 Sep, 2017

2 commits

12 Aug, 2017

1 commit

09 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

2 commits

  • 91c868fe7   Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig ... Browse Code »
    21

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_SPI_FLASH

    Signed-off-by: Simon Glass

    Simon Glass
     
  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    21

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

25 Jul, 2017

1 commit

23 May, 2017

2 commits

22 May, 2017

3 commits

  • 230ecd715   Convert CONFIG_CMD_ERRATA to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_ERRATA

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini

    Simon Glass
     
  • a1dc980d8   Convert CONFIG_CMD_EEPROM et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_EEPROM
    CONFIG_CMD_EEPROM_LAYOUT
    CONFIG_EEPROM_LAYOUT_HELP_STRING

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini
    [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
    platforms]
    Signed-off-by: Tom Rini

    Simon Glass
     
  • 089df18bf   lib: move hash CONFIG options to Kconfig ... Browse Code »
    47

    Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
    using hardware acceleration.") created entries for CONFIG_SHA1,
    CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
    However, no defconfig has migrated to it. Complete the move by first
    adding additional logic to various Kconfig files to select this when
    required and then use the moveconfig tool. In many cases we can select
    these because they are required to implement other drivers. We also
    correct how we include the various hashing algorithms in SPL.

    This commit was generated as follows (after Kconfig additions):

    [1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
    [2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

    Note:
    We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
    because there is dependency between them.

    Cc: Poonam Aggrwal
    Cc: Naveen Burmi
    Cc: Po Liu
    Cc: Shengzhou Liu
    Cc: Priyanka Jain
    Cc: Shaohui Xie
    Cc: Chunhe Lan
    Cc: Chander Kashyap
    Cc: Steve Rae
    Cc: Dirk Eibach
    Cc: Feng Li
    Cc: Alison Wang
    Cc: Sumit Garg
    Cc: Mingkai Hu
    Cc: York Sun
    Cc: Prabhakar Kushwaha
    Cc: Jaehoon Chung
    Cc: Akshay Saraswat
    Cc: Heiko Schocher
    Cc: Jagan Teki
    Signed-off-by: Tom Rini
    Reviewed-by: Simon Glass
    Signed-off-by: Tom Rini

    Tom Rini
     

16 May, 2017

1 commit

15 May, 2017

1 commit

20 Mar, 2017

1 commit

10 Mar, 2017

1 commit

  • 285226785   Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs ... Browse Code »

    In some cases this is absolutely required, so select this for some secure
    features. This also requires migration of RSA_FREESCALE_EXP

    Cc: Ruchika Gupta
    Cc: Poonam Aggrwal
    Cc: Naveen Burmi
    Cc: Po Liu
    Cc: Shengzhou Liu
    Cc: Priyanka Jain
    Cc: Sumit Garg
    Cc: Shaohui Xie
    Cc: Chunhe Lan
    Cc: Feng Li
    Cc: Alison Wang
    Cc: Mingkai Hu
    Cc: York Sun
    Cc: Saksham Jain
    Cc: Prabhakar Kushwaha
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    21

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

04 Feb, 2017

2 commits

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

05 Jan, 2017

3 commits

03 Dec, 2016

1 commit

24 Nov, 2016

1 commit

24 Oct, 2016

1 commit

15 Oct, 2016

1 commit

12 Oct, 2016

1 commit