09 Aug, 2019
2 commits
-
When CI_UDC DM driver is enabled in SPL, it must enable EHCI host. Then when
building SPL DM USB host, the usb_hub.c requires to enable SPL ENV.
The imx8qxp fspi config save ENV in MMC due to fspi can't write when running with M4.
But MMC driver is not enabled in fspi SPL, so the build was broken.
Fix the issue by adding CONFIG_SPL_ENV_IS_NOWHERE to all defconfig with SPL ENV
is enabled.Signed-off-by: Ye Li
-
Enable the configs of usb2 so that both usb2 and usb3 gadget
drivers are now supported on imx8 plaform. And add
CONFIG_USB_PORT_AUTO to support usb port autodetect function
for SDP/fastboot.Signed-off-by: Sherry Sun
28 Jun, 2019
1 commit
-
Add CONFIG_DM_USB_GADGET and CONFIG_SPL_DM_USB_GADGET flag on i.MX8QM
and QXP to support DM USB gadget driver.Signed-off-by: Sherry Sun
24 May, 2019
5 commits
-
Enable the SPL SDP driver and FASTBOOT driver in iMX8QXP LPDDR4,
DDR3 and DX(QXP) 17x17 validation boards.
Move the CONFIG_USB_EHCI_HCD to defconfig, since DX(QXP) 17x17 only
support USB OTG. Also add the USB power up/down in board for SPLSigned-off-by: Ye Li
-
Add support for SD/eMMC, flexspi and NAND SPL boot
Signed-off-by: Ye Li
-
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.
Signed-off-by: Peng Fan
Signed-off-by: Ye Li -
There is eMMC5.1 chip on imx8qxp ARM2 board, enable the HS400 Enhanced
mode(ES) support and SD3.0 SDR104 support.Signed-off-by: Ye Li
-
Add board codes and defconfig files for iMX8QXP/DX validation boards,
including: 8QXP LPDDR4 validation board, 8QXP DDR3 validation board,
8QXP/DX 17x17 LPDDR4/DDR3l validation board.Signed-off-by: Ye Li