05 Dec, 2018
1 commit
-
Add an entry for my maintainership of this tool.
Signed-off-by: Simon Glass
03 Dec, 2018
1 commit
-
Alex suggested to add me as a reviewer for the EFI subsystem.
The patch also adds a description for R: entries.Signed-off-by: Heinrich Schuchardt
Signed-off-by: Alexander Graf
29 Nov, 2018
1 commit
-
This patch adds an entry for MediaTek.
Signed-off-by: Ryder Lee
Reviewed-by: Simon Glass
09 Nov, 2018
1 commit
-
Add mailing list for stm32mp architecture and board.
Signed-off-by: Patrick Delaunay
06 Nov, 2018
1 commit
-
Add NXP linux team upstream maillist as reviewer
Signed-off-by: Peng Fan
17 Oct, 2018
1 commit
-
Xilinx changes for v2018.11-rc2-v2
FPGA:
- Fix SPL fpga loading from FITARM64:
- Fix gic accesses in EL2/EL1Xilinx:
- Add dlc20 board support
- Add Versal board support
- Sync defconfigs
- Enable MP via Kconfig
- Add missing efuse node
- Enable CDC for zcu100cmd:
- Fix kgdb Kconfig dependency
16 Oct, 2018
1 commit
-
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.Signed-off-by: Michal Simek
12 Oct, 2018
1 commit
-
accidentially while fixing merge errors for patch:
https://lists.denx.de/pipermail/u-boot/2018-September/342278.htmlmissed to add files:
MAINTAINERS
drivers/i2c/Kconfig
drivers/i2c/Makefileadd them with this patch.
Signed-off-by: Heiko Schocher
Acked-by: Liviu Dudau
07 Oct, 2018
2 commits
-
Adds configuration option OPTEE_TA_AVB and a header file describing the
interface to the Android Verified Boot 2.0 (AVB) trusted application
provided by OP-TEE.Tested-by: Igor Opaniuk
Reviewed-by: Igor Opaniuk
Signed-off-by: Jens Wiklander
Reviewed-by: Simon Glass -
Adds a uclass to interface with a TEE (Trusted Execution Environment).
A TEE driver is a driver that interfaces with a trusted OS running in
some secure environment, for example, TrustZone on ARM cpus, or a
separate secure co-processor etc.The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.The over all design is based on the TEE subsystem in the Linux kernel,
tailored for U-Boot.Reviewed-by: Simon Glass
Tested-by: Igor Opaniuk
Signed-off-by: Jens Wiklander
06 Oct, 2018
1 commit
-
Add support for the Arm Versatile Express config bus that is
being used for exposing various subsystems via a generic
configuration bus. This driver adds support for generating
transactions on this configuration bus and can be used by
other drivers to abstract the communication with the actual
function providers.Signed-off-by: Liviu Dudau
Reviewed-by: Heiko Schocher
03 Oct, 2018
1 commit
-
This is the PR for SPI-NAND changes along with few spi changes.
[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini
01 Oct, 2018
1 commit
-
Add a PHY driver for the Qualcomm dragonboard 410c which
allows switching on/off and resetting the phy connected
to the EHCI controllers and USBHS controller.Signed-off-by: Ramon Fried
29 Sep, 2018
3 commits
-
Add support for Arm Mali Display Processors DP500, DP550 and DP650.
Only one layer is being used to display the console or boot logo,
even if more layers are supported in the hardware.Signed-off-by: Liviu Dudau
-
Add support for the NXP TDA19988 HDMI encoder as used on the Juno
development board from Arm.Signed-off-by: Liviu Dudau
-
The include/video*.h files are part of the drivers in drivers/video. So it
makes sense to assign them to the same maintainer.Signed-off-by: Heinrich Schuchardt
Reviewed-by: Simon Glass
24 Sep, 2018
3 commits
-
The patch implements the EFI_UNICODE_COLLATION_PROTOCOL.
Signed-off-by: Heinrich Schuchardt
Signed-off-by: Alexander Graf -
This patch provides a define to initialize a table that maps lower to
capital letters for Unicode code point 0x0000 - 0xffff.Signed-off-by: Heinrich Schuchardt
Signed-off-by: Alexander Graf -
Provide unit tests for Unicode functions.
Signed-off-by: Heinrich Schuchardt
Signed-off-by: Alexander Graf
20 Sep, 2018
2 commits
-
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.Signed-off-by: Miquel Raynal
-
- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
to support the turris platform
- Many fixes and enhancements to the pxa3xx NAND driver
- Fixes for the UART boot mode in kwboot
- Misc minor changes to other 32bit and 64bit boards
19 Sep, 2018
1 commit
-
This adds a weak definition of comphy_update_map to comphy_core,
which does nothing. If this function is defined elsewhere, for example
in board file, the board file can change some parameters of SERDES
configuration.This is needed on Turris Mox, where the SERDES speed on lane 1 has to
be set differently when SFP module is connected and when Topaz Switch
module is connected.This is a temporary solution. When the comphy driver for armada-3720
will be added to the kernel, the comphy driver in u-boot shall also be
updated and this should be done differently then.Signed-off-by: Marek Behun
Signed-off-by: Stefan Roese
18 Sep, 2018
6 commits
-
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on
the MPC83xx architecture.Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Add a CPU driver for the MPC83xx architecture.
Signed-off-by: Mario Six
-
Add a timer driver for the MPC83xx architecture.
Signed-off-by: Mario Six
-
Add a clock driver for the MPC83xx architecture.
Signed-off-by: Mario Six
-
Add a sysreset driver for the MPC83xx platform.
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Add a RAM driver for the MPC83xx architecture.
Reviewed-by: Simon Glass
Signed-off-by: Mario Six
11 Sep, 2018
4 commits
-
FPGA changes for v2018.11
- add fpga tests to cover fpga commands
- fpga Kconfig cleanup
- fix cmd/fpga.c
- add support for missing fpga loadmk commands
- add fpga fragment to MAINTAINERS -
Add support for Texas Instruments' K3 Generation Processor
families.Signed-off-by: Lokesh Vutla
Reviewed-by: Tom Rini -
FPGA subsystem requires special care that's why it should be maintained
via one tree.Signed-off-by: Michal Simek
Reviewed-by: Simon Glass -
Add support for loading U-Boot on the Broadcom 7260 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.Signed-off-by: Thomas Fitzsimmons
Reviewed-by: Florian Fainelli
Cc: Florian Fainelli
14 Aug, 2018
2 commits
-
Add new drivers
Add Christophe Kerello and myself as maintainersSigned-off-by: Patrice Chotard
-
Add scattered driver files around the source tree
that belongs to Snapdragon arch. Not sure why they
were not included in the first place.Signed-off-by: Ramon Fried
11 Aug, 2018
1 commit
-
Create separate html pages for linker lists, the serial subsystem,
and the EFI subsystem.Add a table of content.
Signed-off-by: Heinrich Schuchardt
06 Aug, 2018
1 commit
-
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
and point to origin internal board name.Signed-off-by: Michal Simek
31 Jul, 2018
2 commits
-
Signed-off-by: Eugeniy Paltsev
Signed-off-by: Alexey Brodkin -
Patch queue for efi - 2018-07-25
Highlights this time:
- Many small fixes to improve spec compatibility (found by SCT)
- Almost enough to run with sandbox target
- GetTime() improvements
- Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
27 Jul, 2018
1 commit
-
Scott is no longer maintaining the NAND subsystem, mark as orphaned for
now.Acked-by: Scott Wood
Signed-off-by: Tom Rini
25 Jul, 2018
1 commit
-
lib/charset.c is only used by the EFI subsystem.
Signed-off-by: Heinrich Schuchardt
Signed-off-by: Alexander Graf