Eric Lee / smarc-uboot

04 Dec, 2017

1 commit

  • 6ae3900a8   mtd: nand: Rename nand.h into rawnand.h ... Browse Code »

    This header was renamed to rawnand.h in Linux.

    The following is the corresponding commit in Linux.

    commit d4092d76a4a4e57b65910899948a83cc8646c5a5
    Author: Boris Brezillon
    Date: Fri Aug 4 17:29:10 2017 +0200

    mtd: nand: Rename nand.h into rawnand.h

    We are planning to share more code between different NAND based
    devices (SPI NAND, OneNAND and raw NANDs), but before doing that
    we need to move the existing include/linux/mtd/nand.h file into
    include/linux/mtd/rawnand.h so we can later create a nand.h header
    containing all common structure and function prototypes.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

15 Sep, 2017

1 commit

12 Jul, 2017

1 commit

05 Jun, 2017

1 commit

10 May, 2017

3 commits

04 Jun, 2016

1 commit

  • b616d9b0a   nand: Embed mtd_info in struct nand_chip ... Browse Code »
    64

    nand_info[] is now an array of pointers, with the actual mtd_info
    instance embedded in struct nand_chip.

    This is in preparation for syncing the NAND code with Linux 4.6,
    which makes the same change to struct nand_chip. It's in a separate
    commit due to the large amount of changes required to accommodate the
    change to nand_info[].

    Signed-off-by: Scott Wood

    Scott Wood
     

19 Feb, 2016

1 commit

02 Feb, 2016

1 commit

21 Aug, 2015

3 commits

01 Apr, 2015

1 commit

  • 41d41a93f   ARM: atmel: at91sam9m10g45ek: enable spl support ... Browse Code »

    Supports boot up from NAND flash with software ECC eanbled.
    And supports boot up from SD/MMC card with FAT file system.

    As the boot from SD/MMC card with FAT file system, the BSS
    segment is too big to fit into SRAM, so, use the lds to put
    it into SDRAM.

    Signed-off-by: Bo Shen

    Bo Shen
     

21 Feb, 2015

1 commit

  • 4614b8913   ARM: at91: move board select menu and common settings ... Browse Code »

    The board select menu in arch/arm/Kconfig is still big.
    To slim down it, this commit moves AT91 boards to
    arch/arm/mach-at91/Kconfig.
    Also, consolidate "config SYS_SOC" in each board Kconfig.

    The Kconfig files under board/ directory were modified with the
    following command:

    find board -name Kconfig | xargs sed -i -e '
    /config SYS_SOC/ {
    N
    /default "at91"/ {
    N
    d
    }
    }
    '

    Signed-off-by: Masahiro Yamada
    Acked-by: Andreas Bießmann

    Masahiro Yamada
     

29 Oct, 2014

1 commit

  • 2e07c249a   kconfig: arm: introduce symbol for ARM CPUs ... Browse Code »
    230

    This commit introduces a Kconfig symbol for each ARM CPU:
    CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
    CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
    Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
    for CPU_ARM1176 and CPU_V7.

    For each target, the corresponding CPU is selected and the definition of
    SYS_CPU in the corresponding Kconfig file is removed.

    Also, it removes redundant "string" type in some Kconfig files.

    Signed-off-by: Georges Savoundararadj
    Acked-by: Albert ARIBAUD
    Cc: Masahiro Yamada

    Georges Savoundararadj
     

14 Sep, 2014

1 commit

  • 461be2f96   kconfig: remove redundant "string" type in arch and board Kconfigs ... Browse Code »
    46

    Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
    are specified in arch/Kconfig.

    We can delete the ones in arch and board Kconfig files.

    This commit can be easily reproduced by the following command:

    find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
    /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
    }
    '

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

12 Jun, 2014

1 commit

27 May, 2014

1 commit

  • cf874c190   ARM: at91sam9m10g45ek: enable mci0 support ... Browse Code »

    Also we enable the mmc command in configuration file.

    As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
    so remove the redundant CONFIG_DOS_PARTITION definition.

    Signed-off-by: Josh Wu
    Signed-off-by: Andreas Bießmann

    Wu, Josh
     

02 Dec, 2013

1 commit

  • 4535a24c0   arm926ejs, at91: add common phy_reset function ... Browse Code »

    add common phy reset code into a common function.

    Signed-off-by: Heiko Schocher
    Cc: Andreas Bießmann
    Cc: Bo Shen
    Cc: Jens Scharsig
    Cc: Sergey Lapin
    Cc: Stelian Pop
    Cc: Albin Tonnerre
    Cc: Eric Benard
    Cc: Markus Hubig
    Acked-by: Jens Scharsig (BuS Elektronik)
    Tested-by: Jens Scharsig (BuS Elektronik)
    Tested-by: Bo Shen
    Acked-by: Bo Shen
    Signed-off-by: Andreas Bießmann

    Heiko Schocher
     

01 Nov, 2013

1 commit

22 Aug, 2013

1 commit

24 Jul, 2013

1 commit

01 Sep, 2012

1 commit

  • bfc325ed3   arm:at91-boards: remove console_init_f where unnecessary ... Browse Code »

    A lot of at91 boards have the console_init_f in board_init. This is useless
    cause it was called before by generic code in lib/board.c.

    Signed-off-by: Andreas Bießmann
    cc: Jens Scharsig
    cc: Stelian Pop
    cc: Sedji Gaouaou
    cc: Albin Tonnerre
    cc: Eric Benard
    Tested-by: voice.shen@atmel.com
    Tested-by: voice.shen@atmel.com
    Acked-by: Jens Scharsig (BuS Elektronik)
    Tested-by: Jens Scharsig (BuS Elektronik)

    Andreas Bießmann
     

29 Nov, 2011

1 commit

16 Oct, 2011

1 commit

  • 464c79207   punt unused clean/distclean targets ... Browse Code »

    The top level Makefile does not do any recursion into subdirs when
    cleaning, so these clean/distclean targets in random arch/board dirs
    never get used. Punt them all.

    MAKEALL didn't report any errors related to this that I could see.

    Signed-off-by: Mike Frysinger

    Mike Frysinger
     

04 Sep, 2011

1 commit

18 Nov, 2010

1 commit

  • 6d8962e81   Switch from archive libraries to partial linking ... Browse Code »

    Before this commit, weak symbols were not overridden by non-weak symbols
    found in archive libraries when linking with recent versions of
    binutils. As stated in the System V ABI, "the link editor does not
    extract archive members to resolve undefined weak symbols".

    This commit changes all Makefiles to use partial linking (ld -r) instead
    of creating library archives, which forces all symbols to participate in
    linking, allowing non-weak symbols to override weak symbols as intended.
    This approach is also used by Linux, from which the gmake function
    cmd_link_o_target (defined in config.mk and used in all Makefiles) is
    inspired.

    The name of each former library archive is preserved except for
    extensions which change from ".a" to ".o". This commit updates
    references accordingly where needed, in particular in some linker
    scripts.

    This commit reveals board configurations that exclude some features but
    include source files that depend these disabled features in the build,
    resulting in undefined symbols. Known such cases include:
    - disabling CMD_NET but not CMD_NFS;
    - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

    Signed-off-by: Sebastien Carlier

    Sebastien Carlier
     

19 Oct, 2010

1 commit

  • 14d0a02a1   Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE ... Browse Code »

    The change is currently needed to be able to remove the board
    configuration scripting from the top level Makefile and replace it by
    a simple, table driven script.

    Moving this configuration setting into the "CONFIG_*" name space is
    also desirable because it is needed if we ever should move forward to
    a Kconfig driven configuration system.

    Signed-off-by: Wolfgang Denk

    Wolfgang Denk
     

12 Jul, 2010

1 commit

01 Jul, 2010

1 commit

  • 64203c7b0   USB OHCI support for at91sam9g45 SoC ... Browse Code »

    Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards.

    Note that according to errata from Atmel, OHCI is not operational
    on the first revision of at91sam9g45 chip. So this patch enables
    OHCI support for later revisions.

    Signed-off-by: Sergey Matyukevich

    Sergey Matyukevich
     

08 Mar, 2010

1 commit

12 Jul, 2009

1 commit

  • 22ee64738   at91: Introduction of at91sam9g45 SOC. ... Browse Code »

    AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
    It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
    peripherals.

    The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
    On the board you can find 2 USART, USB high speed,
    a 480*272 LG lcd, ethernet, gpio/joystick/buttons.

    Signed-off-by: Sedji Gaouaou

    Sedji Gaouaou