13 May, 2014
22 commits
-
Trivial fix to .gitignore for spl/Makefile
According to the gitignore man page:
"An optional prefix "!" which negates the pattern; any matching file
excluded by a previous pattern will become included again."
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
So the directory exclude "/spl/*" must come before the exception
for spl/Makefile otherwise it has no effect.Signed-off-by: Ralph Siemsen
Tested-by: Masahiro Yamada [on git v1.7.9.5 / v1.8.3.2] -
We say we have an XIP (in this case, image loaded at desired execution
address) when the image header has been offset in the load. It's
possible that in some cases executing the header is non-fatal but that's
not true in many other cases.Signed-off-by: Tom Rini
-
Add missing aes.c placeholder which includes lib/aes.c . Without this
one, tools/env/ will fail to build.Signed-off-by: Marek Vasut
Cc: Alexey Brodkin
Cc: Masahiro Yamada
Tested-by: Alexey Brodkin
Tested-by: Heiko Schocher -
Commit 345b77ba removed some nand_spl boards but
it missed to delete linker scripts.These linker scripts are not used now.
And one more fix:
amcc/acadia does not support nand_spl anymore, so remove
#if !defined(CONFIG_NAND_U_BOOT) ... #endifSigned-off-by: Masahiro Yamada
Cc: Stefan Roese
Acked-by: Stefan Roese -
Some new boards define CONFIG_SYS_HZ again! Remove.
Signed-off-by: Masahiro Yamada
Acked-by: Bo Shen -
CONFIG_BOARDDIR is not referenced in these linker scripts.
The comment /* CONFIG_BOARDDIR */ is misleading.Signed-off-by: Masahiro Yamada
-
console_buffer array is defined to be CONFIG_SYS_CBSIZE + 1 long,
whereas the_command array only CONFIG_SYS_CBSIZE long. Subsequent
use of strcpy(the_command, console_buffer) will write final \0
terminating byte outside the_command array when entering a command
of max length.Signed-off-by: Kristian Otnes cisco com>
-
Commit 33a02da0 supported "" for the board field of boards.cfg.
But it missed to modify spl/Makefile.This commit provides the flexibility so we can use "" board
in SPL too. -
Make funtions static which are locally used in file.
Signed-off-by: Manish Badarkhe
-
Signed-off-by: Fabio Estevam
Acked-by: Simon Glass -
Commit 2842c1c24269a05142802d25520e7cb9035e456c introduced lib/sha256 into
mkimage. Since then it will be compiled with HOSTCC which may produce errors
on some systems. Most BSD systems (like OS X for me) do not ship a
linux/string.h which will lead to take the U-Boot provided
include/linux/string.h in the end. This header howver is completely wrong
here. Just take the string.h if compiling with HOSTCC and linux/string.h when
not.Signed-off-by: Andreas Bießmann
Cc: Heiko Schocher
Acked-by: Heiko Schocher -
Using __DATE__, __TIME__ would make the build non-deterministic.
If the code needs to refer to build date/time, use U_BOOT_DATE and
U_BOOT_TIME in include/generated/timestamp_autogenerated.h instead.This commit has been imported from Linux Kernel,
which should be applied to U-Boot too:commit fe7c36c7bde12190341722af69358e42171162f3
Author: Josh Triplett
Date: Mon Dec 23 13:56:06 2013 -0800Makefile: Build with -Werror=date-time if the compiler supports it
GCC 4.9 and newer have a new warning -Wdate-time, which warns on any use
of __DATE__, __TIME__, or __TIMESTAMP__, which would make the build
non-deterministic. Now that the kernel does not use any of those
macros, turn on -Werror=date-time if available, to keep it that way.The kernel already (optionally) records this information at build time
in a single place; other kernel code should not duplicate that.Signed-off-by: Josh Triplett
Signed-off-by: Michal Marek
Signed-off-by: Masahiro Yamada -
__DATE__ and __TIME__ makes the build non-deterministic.
Drop the debug message using them.Signed-off-by: Masahiro Yamada
-
bfin_gen_rand_mac() uses __DATE__ as the seed for random ethernet
address. This makes the build non-deterministic.In the first place, it should not be implemented as a Bfin-specific
function. Use eth_random_addr() instead.Signed-off-by: Masahiro Yamada
Cc: Sonic Zhang -
Some functions in include/net.h are ported from
include/linux/etherdevice.h of Linux Kernel.For ex.
is_zero_ether_addr()
is_multicast_ether_addr()
is_broadcast_ether_addr()
is_valid_ether_addr();So, we should use the same function name as that of Linux Kernel,
eth_rand_addr(), for consistency.Besides, eth_rand_addr() has been implemented as an inline function.
So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR.Signed-off-by: Masahiro Yamada
Acked-by: Joe Hershberger -
Signed-off-by: Masahiro Yamada
-
The command "time" shows the execution time of the command given
to the argument, like this:time: 45.293 seconds, 45293 ticks
Since we adopted CONFIG_SYS_HZ = 1000 for all boards,
we always have a simple formula: "1 tick = 0.0001 second".Showing ticks looks almost redundant.
Signed-off-by: Masahiro Yamada
-
As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.Signed-off-by: Shengzhou Liu
-
Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before,
but used "if (phydev->supported & SUPPORTED_Autoneg)" now.
So assign "phydev->supported" to "phydev->drv->features" for ar8035
to enable autonegotiation. Then removed the genphy_config_aneg() function.Signed-off-by: Xie Xiaobo
-
keystone serial hw support hw flow control. This patch
enables hw flow control for keystone EVMs as an optional
feature based on CONFIG_SERIAL_HW_FLOW_CONTROL.Signed-off-by: Murali Karicheri
-
Use of malloc of do_fat_write() causes cache error on ARM v7 platforms.
Perhaps, the same problem will occur at any other CPUs.
This replaces malloc with memalign to fix cache buffer alignment.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Yoshiyuki Ito
Tested-by: Hector Palacios -
gd->bd->bi_baudrate is a copy of gd->baudrate.
Since baudrate is a common feature for all architectures,
keep gd->baudrate only.It is true that bi_baudrate was passed to the kernel in that structure
but it was a long time ago.Signed-off-by: Masahiro Yamada
Cc: Tom Rini
Cc: Simon Glass
Cc: Wolfgang Denk
Cc: Heiko Schocher
Acked-by: Michal Simek (For microblaze)
12 May, 2014
1 commit
-
Signed-off-by: Tom Rini
10 May, 2014
9 commits
-
Signed-off-by: Masahiro Yamada
Cc: Simon Glass
Acked-by: Simon Glass -
Prior to commit 33a02da0, all boards must have board/${BOARD}/
or board/${VENDOR}/${BOARD}/ directory.
Now this rule is obsolete.It looks weird that sandbox defines "vendor" and "board" just for
meeting the old U-Boot directory structure.Signed-off-by: Masahiro Yamada
Cc: Simon Glass -
Keep track of all Signed-off-by tags in a commit and silently suppress any
duplicates.Signed-off-by: Simon Glass
-
This sort of failure is rare, but the code to deal with it is wrong.
Fix it.Signed-off-by: Simon Glass
-
Now that sandbox has a good base of features, the README is quite out of
date. Update it, and document the new features.Signed-off-by: Simon Glass
-
Some machines do not have SDL libraries installed, and it is still useful
to build sandbox without LCD/keyboard support.Add an option for this, used as follows:
make sandbox_config all NO_SDL=1
Signed-off-by: Simon Glass
-
In the case where an environment variable spans multiple lines, we should
use run_command_list() so that all lines are executed. This shold be
backwards compatible with existing behaviour for existing scripts.Signed-off-by: Simon Glass
-
Adjust the code for these commands so that they work on sandbox.
Signed-off-by: Simon Glass
(Adjusted to fix minor merge comflict, when applied)Change-Id: I987dee6194cd5c83f82604caf894fc85e4eb71a8
09 May, 2014
7 commits
-
Conflicts:
drivers/net/Makefile(trivial merge)
-
Without this patch SPARC/LEON does not build.
Reported-by: Tom Rini
Signed-off-by: Daniel Hellstrom -
Before it was hardcoded to 1000 ticks per second.
Signed-off-by: Daniel Hellstrom
-
's/zynq_serial_initalize/zynq_serial_initialize/g'
serial_initialize is used by all serial drivers.Signed-off-by: Michal Simek
-
Warnings:
drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_init' was not declared. Should it be static?
drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_setbrg' was not declared. Should it be static?
drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_getc' was not declared. Should it be static?
drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_tstc' was not declared. Should it be static?
drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_putc' was not declared. Should it be static?
drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_puts' was not declared. Should it be static?
drivers/serial/serial_zynq.c:182:22: warning: symbol 'uart_zynq_serial0_device' was not declared. Should it be static?
drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_init' was not declared. Should it be static?
drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_setbrg' was not declared. Should it be static?
drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_getc' was not declared. Should it be static?
drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_tstc' was not declared. Should it be static?
drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_putc' was not declared. Should it be static?
drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_puts' was not declared. Should it be static?
drivers/serial/serial_zynq.c:185:22: warning: symbol 'uart_zynq_serial1_device' was not declared. Should it be static?Signed-off-by: Michal Simek
08 May, 2014
1 commit
-
Signed-off-by: Jesper B. Christensen
Signed-off-by: Michal Simek
