20 Oct, 2012
1 commit
-
Conflicts:
drivers/serial/serial_lh7a40x.cSigned-off-by: Tom Rini
18 Oct, 2012
1 commit
-
The sbc8548/60 (both similar, just variations in UART hardware)
support has been removed from the linux kernel as of v3.6-rc1~132
so lets also now remove it from the u-boot tree as well.Signed-off-by: Paul Gortmaker
16 Oct, 2012
8 commits
-
Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted
to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated
Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with
Windows CE 4.2 operating system.Signed-off-by: Lukasz Dalek
-
mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video InputAdd very basic support for it.
Signed-off-by: Fabio Estevam
-
mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- AudioAdd very basic support for it.
Signed-off-by: Fabio Estevam
-
Medcom is the marketing name for an older, PXA-based version of the same
device. In order to avoid confusion, rename the Tegra-based version to
the new marketing name.Signed-off-by: Thierry Reding
Acked-by: Stephen Warren
Signed-off-by: Tom Warren -
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.Signed-off-by: Stefan Roese
Cc: Peter De Schrijver
Acked-by: Marek Vasut -
Since the IOP480 (PPC401/3 variant from PLX) is only used on 2
boards that are not actively maintained, lets remove support
for it completely. This way the ppc4xx code will get a bit cleaner.Signed-off-by: Stefan Roese
Acked-by: Matthias Fuchs
Acked-by: Marek Vasut -
The former maintainer is no longer interested, move to orphaned. Patch
is from the former maintainer.Signed-off-by: Tom Rini
-
After taking with the former maintainer, delete this platform. The
patch is from the former maintainer.Signed-off-by: Tom Rini
06 Oct, 2012
3 commits
-
Signed-off-by: Tetsuyuki Kobayashi
-
Due to grown code sizes the TQM85xx boards don't build any more with
some older tool chains (like ELDK 4.2). As these boards have long
reached EOL it seems a waste of effort trying to fix them. The vendor
has agreed to drop support for them, too. So let's get rid of them.Signed-off-by: Wolfgang Denk
Cc: Stefan Roese
cc: Kim Phillips
Acked-by: Stefan Roese
05 Oct, 2012
2 commits
-
Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
Signed-off-by: Dinh Nguyen
Signed-off-by: Chin Liang See
Signed-off-by: Pavel Machek
Reviewed-by: Marek Vasut
Acked-by: Tom Trini
Cc: Wolfgang Denx
Cc: Albert Aribaud
Cc: Stefan Roese
----
v8: Remove no_return attribute for reset_cpuBased on v2012.10-rc2
04 Oct, 2012
2 commits
-
Add support for Xilinx Zynq board.
Signed-off-by: Michal Simek
Acked-by: Marek Vasut
CC: Joe Hershberger -
This patch adds support for the X600 SPEAr600 based board. Its also
the first SPEAr600 board that uses the newly introduced SPEAr600
SPL support. Xloader is not necessary any more. By using the new
"u-boot.spr" make target, one image will generated containing both,
U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and
the main U-Boot with mkimage header.Signed-off-by: Stefan Roese
Cc: Amit Virdi
Cc: Vipin Kumar
03 Oct, 2012
7 commits
-
Add support for new board iConnect from Iomega.
More information about the device can be found here:
http://go.iomega.com/en/products/network-storage-desktop/wireless-data-station/network-hard-drive-iconnect/?partner=4735
Signed-off-by: Luka Perkov
Tested-by: Wojciech Dubowik
Tested-by: Tim Fletcher -
Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.gitCurrently, supporting only boot from NOR.
Signed-off-by: Gabriel Huau
-
The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM,
Ethernet, and more.This patch supports the following functions:
- 512MB DDR3-SDRAM
- Serial console (SCIF)
- Ethernet MAC(MII) & PHY(SMSC)Signed-off-by: Hideyuki Sano
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
The KZM-A9-GT board has Renesas R-Mobile SH73A0, 512MB DDR2-SDRAM,
USB, Ethernet, and more.This patch supports the following functions:
- 512MB DDR2-SDRAM
- 16MB NOR Flash memory
- Serial console (SCIF)
- Ethernet (SMSC)
- I2CSigned-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
19 Sep, 2012
1 commit
-
This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.Signed-off-by: Marek Vasut
Cc: Albert Aribaud
Cc: Kyungmin Park
Cc: Tom Rini
13 Sep, 2012
1 commit
-
This patch is derived from an older patch provided by atmel in its
buildroot-avr32-v3.0.0.tar.bz2Signed-off-by: Andreas Bießmann
cc: Hans-Christian Egtvedt
Acked-by: Hans-Christian Egtvedt
01 Sep, 2012
12 commits
-
As the maintainer for at91sam9g10ek and at91sam9m10g45ek can not reach
any more.So I wish to take over the maintainer for sam9g10 and sam9m10g45
Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann -
Update maintainer for "efikamx" and "efikasb" to myself.
Signed-off-by: Matt Sealey
Cc: Stefano Babic
Cc: Marek Vasut -
This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.Signed-off-by: Allen Martin
Acked-by: Stephen Warren
Tested-by: Thierry Reding
Signed-off-by: Tom Warren -
The Raspberry Pi model B uses the BCM2835 SoC, has 256MB of RAM,
contains an SMSC 9512 USB LAN/Hub chip, and various IO connectors.
For more details, see http://www.raspberrypi.org/.Various portions (cache enable, MACH_TYPE setup, RAM size limit, stack
relocation to top of RAM) extracted from work by:
Oleksandr Tymoshenko .GPIO driver enablement by Vikram Narayanan .
Signed-off-by: Stephen Warren
Acked-by: Tom Rini -
Signed-off-by: Mathieu Poirier
Signed-off-by: John Rigby
Acked-by: Tom Rini
Acked-by: Linus WalleijConflicts:
drivers/gpio/Makefile
-
This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDsSigned-off-by: Marek Vasut
-
This adds support for Bluegiga APX4 Development Kit. It is built around
Freescale i.MX28. Currently supported features are: ethernet, I2C, MMC,
RTC and USB. APX4 has only one ethernet port.Signed-off-by: Veli-Pekka Peltola
Signed-off-by: Lauri Hintsala
Cc: Stefano Babic -
This adds support for the AT91SAM9G20 boards by taskit GmbH.
Both boards, Stamp9G20 and PortuxG20, are integrated in one
file. PortuxG20 is basically a SBC built around the Stamp9G20.Signed-off-by: Markus Hubig
Cc: Andreas Bießmann
Signed-off-by: Andreas Bießmann -
The grasshopper board is a avr32 based device and belongs therefore to the avr32
section.Signed-off-by: Andreas Bießmann
-
These boards have ARM cores, move to the ARM section.
Signed-off-by: Andreas Bießmann
-
Add at91sam9x5ek board support, this board support the following SoCs
AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35Using at91sam9x5ek_nandflash to configure for the board
Now only supports NAND with software ECC boot upSigned-off-by: Bo Shen
[move MAINTAINERS entry to right place]
Signed-off-by: Andreas Bießmann -
Add common code for o2dnt and o2dnt2 based boards and add different
board configuration files for O2D, O2I, O2DNT2, O2D300, O2MNT and
O3DNT boards.Signed-off-by: Anatolij Gustschin
10 Aug, 2012
1 commit
-
* rename board directory to eb_cpu5282
* rename EB+MCF-EV123_.*config to eb_cpu5282_.*config
* add Maintainer for EB+CPU5282 board
* rename promptSigned-off-by: Jens Scharsig (BuS Elektronik)
08 Aug, 2012
1 commit
-
Signed-off-by: Holger Brunck
cc: Heiko Schocher
cc: Valentin Longchamp
cc: Gerlando Falauto
Acked-by: Heiko Schocher
