21 Jun, 2016
1 commit
26 Apr, 2016
1 commit
31 Mar, 2016
1 commit
30 Mar, 2016
1 commit
10 Mar, 2016
1 commit
11 Dec, 2015
1 commit
01 Nov, 2015
1 commit
26 Oct, 2015
1 commit
12 Oct, 2015
1 commit
08 Oct, 2015
1 commit
31 Aug, 2015
1 commit
15 Jul, 2015
1 commit
-
…h in uboot and kernel. Comment out the pcie config in uboot to make kernel work properly.
30 Jun, 2015
1 commit
16 Jun, 2015
1 commit
11 Jun, 2015
1 commit
28 May, 2015
1 commit
12 May, 2015
1 commit
07 May, 2015
1 commit
05 Mar, 2015
1 commit
10 Jan, 2015
1 commit
15 Apr, 2014
1 commit
-
Signed-off-by: Tom Rini
14 Apr, 2014
2 commits
-
Add CONFIG_SYS_GENERIC_BOARD to use common/board_[fr].c for kzm9g.
Signed-off-by: Tetsuyuki Kobayashi
Acked-by: Heiko Schocher
Signed-off-by: Nobuhiro Iwamatsu -
This is regression of commit 2035d77d i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework
Before commit 2035d77d, i2c probe command works properly on kzm9g board.
KZM-A9-GT# i2c probe
Valid chip addresses: 0C 12 1D 32 39 3D 40 60After commit 2035d77d, i2c probe command does not work.
KZM-A9-GT# i2c probe
Valid chip addresses: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7Fsh_i2c_probe() calls sh_i2c_read(), but read length is 0. So acutally it does not read device at all. This patch prepares dummy buffer and read data into it.
Signed-off-by: Tetsuyuki Kobayashi
Acked-by: Heiko Schocher
Signed-off-by: Nobuhiro Iwamatsu
11 Apr, 2014
5 commits
-
Commit d016dc42cedbf6102e100fa9ecb58462edfb14f8 changed the layout of BCH8 SW
on omap3 boards. We need to adopt the ecc layout for the nand_spl_simle
driver to avoid wrong ecc errors.Signed-off-by: Andreas Bießmann
Cc: Thomas WeberSigned-off-by: Andreas Bießmann
-
Signed-off-by: Andreas Bießmann
Cc: Thomas Weber
Signed-off-by: Andreas Bießmann -
Commit 890880583d84607e36b52a785a96b167728bbf73 introduced EEPROM parsing and
board detection but faild to return a valid tricorder_eeprom struct for backup
case. When pressing S200 while reading EEPROM we ignore the value. We
returned falsely a tricorder_eeprom struct with uninitialized data which is
just garbage.
Initialize it by zeroing the whole structure.Signed-off-by: Andreas Bießmann
Cc: Thomas Weber
Signed-off-by: Andreas Bießmann -
During switch to device tree, commit 1ecab0f has removed this code.
INFORM4 and INFORM5 registers are used by TRATS2 first stage bootloader for
providing recovery. For normal operation, those two must be cleared out.This error emerges when one force reset from u-boot's command line for
three times.Signed-off-by: Lukasz Majewski
Cc: Minkyu Kang
Acked-by: Minkyu Kang -
In some use cases, SPL linker script was not updated even when
it should be.For instance,
$ make tricoder_config all
[ build complete ]
... modify include/configs/tricoder.h
$ makespl/u-boot-spl.lds should be updated in this case, but it wasn't.
To fix this problem, linker scripts generation should be handled
by $(call if_changed_dep,...) rather than by $(call if_changed,...).Signed-off-by: Masahiro Yamada
Reported-by: Andreas Bießmann
Tested-by: Andreas Bießmann
08 Apr, 2014
12 commits
-
Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
include/configs/trats.h
include/configs/trats2.h
include/mmc.h -
This patch add gicv3 support to uboot armv8 platform.
Changes for v2:
- rename arm/cpu/armv8/gic.S with arm/lib/gic_64.S
- move smp_kick_all_cpus() from gic.S to start.S, it would be
implementation dependent.
- Each core initialize it's own ReDistributor instead of master
initializeing all ReDistributors. This is advised by arnab.basu
.Signed-off-by: David Feng
-
The conditional is using a variable that is not defined.
Signed-off-by: Rommel G Custodio
-
When flush the d$ with set/way instruction, it need calculate the way's
offset = log2(Associativity); but in current uboot's code, it use below
formula to calculate the offset: log2(Associativity * 2 - 1), so finally
it cannot flush data cache properly.Signed-off-by: Leo Yan
-
For ARMv8, U-boot has been running at EL3 with cache and MMU enabled.
Without proper setup for EL2, cache and MMU are both disabled (out of
reset). Before switching, we need to flush the dcache to make sure the
data is in the main memory.Signed-off-by: York Sun
Acked-by: David.Feng -
Get rid of double VF610_PAD_DDR_A15__DDR_A_15 iomux configuration.
Signed-off-by: Marcel Ziswiler
-
This patch contains several changes required for second Ethernet
(enet1/RMII1) port on vf610
- ANADIG PLL5 control definitions required for Ethernet RMII1 clock
- Secondary Ethernet (enet1) MAC RMII1 base address definition
- RMII1 iomux definitions
- VF610_PAD_PTA6__RMII0_CLKOUT iomux definition required for
internal (e.g. crystal-less) Ethernet clocking.Signed-off-by: Marcel Ziswiler
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner -
Add CCM_CCGR0_UART0_CTRL_MASK clock definition and add TX/RX iomux
definitions for UART0 (aka. SCI0).Signed-off-by: Marcel Ziswiler
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner -
The anadig_reg structure started at the wrong offset (fixed by adding
reserved_0x000[4]), was missing some reserved field required for
alignment purpose (reserved_0x094[3] between pll4_denom and pll6_ctrl)
and further contained a too short reserved field causing further miss-
alignment (reserved_0x0C4[7]). Also, rename all the reserved fields
and using a memory offset based scheme for.Discovered and tested by temporarily putting the following debug
instrumentation into board_init():
struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
printf("&anadig->pll3_ctrl=0x%p\n", &anadig->pll3_ctrl);
printf("&anadig->pll5_ctrl=0x%p\n", &anadig->pll5_ctrl);Signed-off-by: Marcel Ziswiler
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner -
After Kbuild introduction, the CROSS_COMPILE environment variable has been
set to some default value (prefix arm-linux-).This shall be removed since it breaks building u-boot for native arm target
(like qemu ARM).
Moreover not all compilers have arm-linux- prefix.Additionally the u-boot cross compiles with CROSS_COMPILE= set explicitly-
e.g.:
CROSS_COMPILE=/ .... /arm-v7a-linux-gnueabi- makeSigned-off-by: Lukasz Majewski
Cc: Masahiro Yamada
Acked-by: Masahiro Yamada -
Since MX6 is Cortex-A9 r2p10, enable software workaround
for errata 794072 and 761320.Signed-off-by: Nitin Garg
