12 Jan, 2015
10 commits
-
Signed-off-by: Tom Rini
-
Since commit 41623c91b09a0c865fab41acdaff30f060f29ad6 u-boot running in qemu is
crashing in function do_omap3_emu_romcode_call(). RX-51 board uses this function
for Cortex-A8 errata 430973 workaround (Set IBE bit in ACR) which is needed only
on real secure device and not in qemu.This board patch just disable calling secure PPA routine on non secure devices.
Qemu implements GP device and with this patch u-boot is working in qemu again.Signed-off-by: Pali Rohár
Acked-by: Pavel Machek -
Add Peter Tyser as the maintainer of Extreme Engineering Solutions products.
Signed-off-by: Peter Tyser
-
Convert Extreme Engineering Solutions products to use generic board
support.Signed-off-by: John Schmoller
Signed-off-by: Peter Tyser -
- "string" type for SYS_* is defined in arch/Kconfig
- SYS_CPU "armv7" has been replaced with "select CPU_V7"
- SYS_SOC "tegra124" is already defined in tegra124/KconfigSigned-off-by: Masahiro Yamada
Acked-by: Bo Shen -
Commit 1e4ad74b875f (beagle_x15: add board support for Beagle x15)
missed to add board/ti/beagle_x15/MAINTAINERS.Signed-off-by: Masahiro Yamada
Cc: Felipe Balbi -
This commit fixes warnings reported by tools/genboardscfg.py.
Signed-off-by: Masahiro Yamada
Cc: Vikas Manocha
Acked-by: Vikas Manocha -
Signed-off-by: Stefan Herbrechtsmeier
-
Signed-off-by: Stefan Herbrechtsmeier
-
When CONFIG_TRACE is disabled, linking fails with:
common/built-in.o:(.data.init_sequence_f+0x8): undefined reference to `trace_early_init'
To fix, wrap trace init calls with #ifdef CONFIG_TRACE.
While at it, remove the static inline version of the init call from
trace.h as suggested by Simon Glass, since it doesnt work.Cc: Simon Glass
Cc: Tom Rini
Signed-off-by: Kevin Hilman
Acked-by: Simon Glass
11 Jan, 2015
6 commits
-
The two error checks for image_boot_mode_id and image_nand_ecc_mode_id where
wrong and would never fail, fix that!This was detected by Apple's clang compiler:
---8< 0 is always false [-Wtautological-compare]
if (el->bootfrom < 0) {
~~~~~~~~~~~~ ^ ~
tools/kwbimage.c:571:23: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (el->nandeccmode < 0) {
~~~~~~~~~~~~~~~ ^ ~
2 warnings generated.
--->8---Signed-off-by: Andreas Bießmann
Acked-By: Jeroen Hofstee -
Remove unused vsync parameter, and correct the include file.
Signed-off-by: Bo Shen
-
Remove unused vsync parameter, and correct the include file.
Signed-off-by: Bo Shen
-
Correct the LCD pixel clock, remove unused vsync parameter,
and also correct the include file.Signed-off-by: Bo Shen
-
When building with my toolchain (4.8.2):
CROSS_COMPILE=/home/lukma/work/ptxdist/toolchains/arm/OSELAS.Toolchain-2013.12.0/arm-v7a-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/bin/arm-v7a-linux-gnueabi-I see following WARNING:
tools/kwbimage.c: In function "kwbimage_set_header":
tools/kwbimage.c:803:8: warning: "headersz" may be used uninitialized in this function [-Wmaybe-uninitialized]
memcpy(ptr, image, headersz);
^
This fix aims to suppress it.Signed-off-by: Lukasz Majewski
Acked-by: Stefan Roese
Acked-by: Heiko Schocher
10 Jan, 2015
4 commits
-
MetaWare debugger (MDB) is still used as a primary tool for interaction
with target via JTAG. Moreover some very advanced features are not yet
implemented in GDB for ARC (and not sure if they will be implemnted
sometime soon given complexity and rare need for those features for
common user).So if we're talking about development process when U-Boot is loaded in
target memory not by low-level boot-loader but manually through JTAG
chances are high developer uses MDB for it.But MDB doesn't support PIE (position-independent executable) - it will
refuse to even start - that means no chance to load elf contents on
target.
Then the only way to load U-Boot in MDB is to fake it by:
1. Reset PIE flag in ELF header
This is simpe - on attempt to open elf MDB checks header and if it
doesn't match its expectation refuces to use provided elf.
2. Strip all debug information from elf
If (1) is done then MDB will open elf but on parsing of elf's debug
info it will refuse to process due to debug info it cannot understand
(symbols with PIE relocation).Even though it could be done manually (I got it documented quite a while
ago here http://www.denx.de/wiki/U-Boot/ARCNotes) having this automated
way is very convenient. User may build U-Boot that will be loaded on
target via MDB saying "make mdbtrick".Then if we now apply the manipulation MDB will happily start and will
load all required sections into the target.Indeed there will be no source-level debug info available. But still MDB
will do its work on showing disassembly, global symbols, registers,
accessing low-level debug facilities etc.As a summary - this is a pretty dirty hack but it simplifies life a lot
for us ARc developers.Signed-off-by: Alexey Brodkin
Cc: Tom Rini
Cc: Wolfgang Denk -
Currently, "nand scrub" runs chip->scan_bbt at the end of
nand_erase_opts() even if NAND_SKIP_BBTSCAN flag is set.It violates the intention of NAND_SKIP_BBTSCAN.
Move NAND_SKIP_BBTSCAN flag check to nand_block_checkbad() so that
chip->scan_bbt() is never run if NAND_SKIP_BBTSCAN is set.Also, unset NAND_BBT_SCANNED flag instead of running chip->scan_bbt()
right after scrub. We can be lazier here because the BBT is scanned
at the next call of nand_block_checkbad().Signed-off-by: Masahiro Yamada
Cc: Scott Wood -
Commit 35c204d8a9d0 (nand: reinstate lazy bad block scanning)
broke NAND_BBT_USE_FLASH feature.Its git-log claimed that it reinstated the change as by commit
fb49454b1b6c ("nand: reinstate lazy bad block scanning"), but it moved
"chip->options |= NAND_BBT_SCANNED" below "chip->scan_bbt(mtd);".It causes recursion if scan_bbt does not find a flash based BBT
and tries to write one, and the attempt to erase the BBT area
causes a bad block check.Reinstate commit ff49ea8977b5 (NAND: Mark the BBT as scanned prior to
calling scan_bbt.).Signed-off-by: Masahiro Yamada
Cc: Rostislav Lisovy
Cc: Heiko Schocher
Cc: Scott Wood -
Since commit ff94bc40af34 (mtd, ubi, ubifs: resync with Linux-3.14),
the "nand scrub" command has not been working.Signed-off-by: Masahiro Yamada
Cc: Scott Wood
Cc: Heiko Schocher
09 Jan, 2015
13 commits
-
Boot from SD-card (and probably also from NAND) was broken since
commit d6d07a9bec ("arm: vf610: add NAND support for vf610twr").
It looks like the increased size of U-Boot lead to a situation
where the boot ROM overwrote its own stack/heap while loading
U-Boot from the SD-card to the SRAM. However, U-Boot worked fine
when loaded through USB serial loader directly into SRAM. It
looks like loading from SD-card uses other stack/heap location
then the serial loader (or maybe no stack or heap at all).
This fix moves U-Boot to gfxRAM, which is 512kB in size and is not
used by the boot ROM nor the SD-card loader of it.Signed-off-by: Stefan Agner
Acked-by: Bill Pringlemeir -
Resynchronize memcpy/memset with kernel 3.17 and build them in
Thumb2 mode (unified syntax). Those assembler files can be built
and linked in ARM mode too, however when calling them from Thumb2
built code, the stack got corrupted and the copy did not succeed
(the exact details have not been traced back). However, the Linux
kernel builds those files in Thumb2 mode. Hence U-Boot should
build them in Thumb2 mode too when CONFIG_SYS_THUMB_BUILD is set.To build the files without warning, some assembler instructions
had to be replaced with their UAL compliant variant (thanks
Jeroen for this input).To build the file in Thumb2 mode the implicit-it=always option need
to be set to generate Thumb2 compliant IT instructions where needed.
We add this option to the general AFLAGS when building for Thumb2.Reviewed-by: Simon Glass
Tested-by: Simon Glass
Signed-off-by: Stefan Agner -
Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx25pdk
hangs like this:CPU: Freescale i.MX25 rev1.2 at 399 MHz
Reset cause: WDOG
Board: MX25PDK
I2C: ready
DRAM: 64 MiB
(hangs)Add a specific relocate_vectors macro that skips the vector relocation, as the
i.MX25 SoC does not provide RAM at the high vectors address (0xFFFF0000), and
(0x00000000) maps to ROM.This allows mx25 to boot again.
Acked-By: Bill Pringlemeir
Signed-off-by: Fabio Estevam -
Add CONFIG_SYS_FSL_QSPI_AHB in header file to enable AHB in driver.
In order to count the time, add CONFIG_CMD_TIME.Using AHB read can improve the the read speed about 30%.
AHB read:
=> time sf read 0x8f800000 0 100000
SF: 1048576 bytes @ 0x0 Read: OK
time: 0.174 seconds=> time sf read 0x8f800000 1000000 100000
SF: 1048576 bytes @ 0x1000000 Read: OK
time: 0.174 secondsIP read:
=> time sf read 0x8f800000 0 100000
SF: 1048576 bytes @ 0x0 Read: OK
time: 0.227 seconds=> time sf read 0x8f800000 1000000 100000
SF: 1048576 bytes @ 0x1000000 Read: OK
time: 0.227 secondsNote:
Quad read is not supported in driver, now. In my side, using AHB and Quad read
can achieve about 16MB/s. Anyway, I have plan to reimplement the driver using
DTB and DM, then make the code cleaner and more feature can be added.Signed-off-by: Peng Fan
Reviewed-by: Jagannadha Sutradharudu Teki -
The QSPI controller in i.MX 6SoloX and Vybrid supports reading data using
IP register and AHB bus.The original driver only supports reading data from IP interface. The IC
team suggests to use AHB read which is faster then IP read. Using AHB read,
we can directly memcpy, a "missed" access to the buffer will cause the
controller to clear the buffer and use the SEQID stored in bfgencr register
to initiate a read from flash device.Since AHB bus is 64 bit width, we can not set MCR register using 32bit. In
order to minimize code change, redefine QSPI_MCR_END_CFD_LE to 64bit Little
endian but not 32bit Little endia.Introduce a new configuration option CONFIG_SYS_FSL_QSPI_AHB. If want to
use AHB read, just define CONFIG_SYS_FSL_QSPI_AHB. If not, just ignore it.
Actually if Vybrid is migrated to use AHB read, this option can be removed and
IP read function can be discared. The reason to introduce this option
is that only i.MX SOC is tested in my side, no Vybrid platform for me.In spi_setup_slave, the original piece code to set AHB is deleted, since
Vybrid platform does not use this to intiate AHB read. Instead, add
qspi_init_ahb_read function if defined CONFIG_SYS_FSL_QSPI_AHB.Signed-off-by: Peng Fan
Reviewed-by: Jagannadha Sutradharudu Teki -
Fix several spelling errors and replace the invalid word
"architectured" with "designed".Signed-off-by: Jeremiah Mahler
-
Currently there is an unneeded empty line after printing the reset cause:
U-Boot 2015.01-rc4-00080-g0551a93 (Jan 06 2015 - 13:04:19)
CPU: Freescale i.MX25 rev1.2 at 399 MHz
Reset cause: PORBoard: MX25PDK
I2C: ready
DRAM: 64 MiB
MMC: FSL_SDHC: 0Remove the extra "\n" when printing the reset cause.
Signed-off-by: Fabio Estevam
-
We should not hardcode array size of i2c_data to 3. To CONFIG_FSL_LSCH3,
there are 4 i2c interface, but not 3. So the size of i2c_data array should
be calculated using "ARRAY_SIZE(i2c_bases)".To avoid compile error, move i2c_bases before sram_data structure which
contains i2c_data array.Signed-off-by: Peng Fan
-
Signed-off-by: Luka Perkov
CC: Prafulla Wadaskar
CC: Wolfgang Denk
Acked-by: Stefan Roese -
Signed-off-by: Luka Perkov
-
According to the UEFI Spec (Table 16, section 5.2.3 of the version 2.4 Errata
B), the protective MBR partition record size must be set to the size of the
disk minus one, in LBAs.However, the current code was setting the size as the total number of LBAs on
the disk, resulting in an off-by-one error.This confused the AM335x ROM code, and will probably confuse other tools as
well.Signed-off-by: Maxime Ripard
-
Commit 73c25753 fixed the common issue that binutil packages (tool/organization
that packaged or built the bin-utils) are included in brackets and this may
falsely be recognized as a version. However, some tools do not provide a
'package' and previously we add the 'Gnu assembler..' to the version.Strip out the '(package version text)' and then look for a ##.## string.
Signed-off-by: Bill Pringlemeir
Tested-by: Masahiro Yamada
Tested-by: Hans de Goede
08 Jan, 2015
5 commits
-
The low-level debugging functions are useful to debug the early boot
stage where the full UART driver is not available.UniPhier SoCs need to initialize the UART port 0 to use this feature.
The initialization routine is called at the very entry of the
lowlevel_init().Signed-off-by: Masahiro Yamada
-
For NAND boot on PH1-LD4, PH1-sLD8, and some other SoCs,
the output of the system bus is disabled by default.
It must be enabled by software to have access to the system bus.Signed-off-by: Masahiro Yamada
-
The max size of available memories on slot0 and slot1 is 32MB because
- EA[25] signal is not output on the save-pin mode which is
used PH1-LD4 or later SoCs.
- EA[25] signal is not connected by the limitation (or bug?) of
the PLD logic of DCC support card.Signed-off-by: Masahiro Yamada
-
No functional change, just simplify the code a bit.
Signed-off-by: Axel Lin
Reviewed-by: Jagannadha Sutradharudu Teki -
Make it a sub-menu of "General setup" like Linux Kernel.
Signed-off-by: Masahiro Yamada
Cc: Tom Rini
07 Jan, 2015
2 commits
-
fdt_first_subnode() returns -FDT_ERR_NOTFOUND if no subnode found.
0 is supposed to be a valid offset returns from fdt_first_subnode().Signed-off-by: Axel Lin
Reviewed-by: Jagannadha Sutradharudu Teki -
mx6sxsabresd revb board uses 32MB qspi flash, reva board uses 16MB qspi
flash. Currently, the default supported platform is revb board.If want to configure for reva board, just define CONFIG_MX6SX_SABRESD_REVA
in mx6sxsabresd.h to support reva qspi flashes whose size is 16MB.Signed-off-by: Peng Fan
Reviewed-by: Jagannadha Sutradharudu Teki