05 Jan, 2017
1 commit
-
Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.Signed-off-by: York Sun
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: Tom Rini
30 Dec, 2016
1 commit
-
Generated by "tools/moveconfig -s".
This will make config moves easier.
Signed-off-by: Masahiro Yamada
03 Dec, 2016
1 commit
-
Move from CONFIG_SYS_EXTRA_OPTIONS to Kconfig option.
Signed-off-by: York Sun
24 Nov, 2016
4 commits
-
CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for
all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI.
CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB.Signed-off-by: York Sun
-
Use TARGET_T1042D4RDB in Kconfig to simplify config options.
Remove macro CONFIG_T1042D4RDB.Signed-off-by: York Sun
-
Replace CONFIG_PPC_T1042 with ARCH_T1024 in Kconfig and clean up
existing macros.Signed-off-by: York Sun
-
Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to
simplify config options.Signed-off-by: York Sun
24 Oct, 2016
4 commits
-
This converts the following to Kconfig:
CONFIG_CFB_CONSOLE_ANSISigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_VIDEOSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
Reviewed-by: Jagan Teki -
Move these option to Kconfig and tidy up existing uses.
The Power PC boards don't have a suitable common element: the common header
files don't appear to line up with the Kconfig files as far as I can tell.
This results in a lot of defconfig changes.Signed-off-by: Simon Glass
Reviewed-by: Jagan Teki
[trini: Re-migrate, update common/console.c logic]
Signed-off-by: Tom Rini
17 Sep, 2016
1 commit
-
A few boards define this in a header file which is incorrect. It means that
Kconfig options that rely on this cannot be used. Move it.Signed-off-by: Simon Glass
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
09 Sep, 2016
1 commit
-
Signed-off-by: Tom Rini
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
-
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.Signed-off-by: Tom Rini
15 Mar, 2016
3 commits
-
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.Move these options to Kconfig and tidy up board configuration:
CONFIG_FIT
CONFIG_OF_BOARD_SETUP
CONFIG_OF_SYSTEM_SETUP
CONFIG_FIT_SIGNATURE
CONFIG_FIT_BEST_MATCH
CONFIG_FIT_VERBOSE
CONFIG_OF_STDOUT_VIA_ALIAS
CONFIG_RSAUnfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.Note: Masahiro's moveconfig.py script is amazing.
Signed-off-by: Simon Glass
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini -
Move this option to Kconfig and tidy up existing boards.
Signed-off-by: Simon Glass
-
Kconfig options must defined in the defconfig files. Since RSA_SOFTWARE_EXP
relies on CONFIG_DM, unless it is set in kconfig we cannot enable RSA.
Remove the hacks which enable CONFIG_DM in header files and update the
defconfig.Signed-off-by: Simon Glass
25 Nov, 2015
2 commits
-
There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.Signed-off-by: Bin Meng
-
There are already Kconfig options for SPI drivers, but we
have not moved them from config.h to defconfig files. This
commit does this in a batch.Signed-off-by: Bin Meng
22 Nov, 2015
1 commit
-
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py.
Signed-off-by: Thomas Chou
22 Aug, 2015
2 commits
-
Move config for the E1000 Ethernet driver to Kconfig and tidy up affected
boards.Signed-off-by: Simon Glass
Acked-by: Joe Hershberger -
Several files are out of order. This means that when the moveconfig tool
moves CONFIG options to Kconfig it generates a large diff. To avoid this,
reorder the files first.Signed-off-by: Simon Glass
29 Jul, 2015
1 commit
-
defconfig files are added and SFP version for these platforms
is updated.Signed-off-by: Gaurav Rana
Reviewed-by: York Sun