/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6UL 14x14 LPDDR2 ARM2.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __MX6UL_14X14_LPDDR2_ARM2_CONFIG_H
#define __MX6UL_14X14_LPDDR2_ARM2_CONFIG_H

#ifdef  CONFIG_SPI_BOOT
#define CONFIG_MXC_SPI
#elif defined(CONFIG_NOR_BOOT)
#define CONFIG_MTD_NOR_FLASH
#define CONFIG_SYS_FLASH_PROTECTION
#elif defined CONFIG_NAND_BOOT
#define CONFIG_CMD_NAND
#endif
#ifdef CONFIG_MTD_NOR_FLASH
/*
 * Conflicts with SD1/SD2/VIDEO/ENET
 * ENET is keeped, since only RXER conflicts.
 * If removed ENET, we can not boot kernel, since sd1/sd2 is disabled
 * when support weimnor.
 */
#undef CONFIG_FSL_USDHC
#undef CONFIG_VIDEO
#endif

#define BOOTARGS_CMA_SIZE   "cma=96M "

#include "mx6ul_arm2.h"

#define PHYS_SDRAM_SIZE			SZ_256M

#ifdef CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  1
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#define CONFIG_SF_DEFAULT_CS   0
#endif

#ifdef CONFIG_DM_ETH
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_ENET_DEV 1  /* The ENET1 has pin conflict with UART1 */

#if (CONFIG_FEC_ENET_DEV == 0)
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x2
#define CONFIG_FEC_XCV_TYPE             MII100
#ifdef CONFIG_DM_ETH
#define CONFIG_ETHPRIME			"eth0"
#else
#define CONFIG_ETHPRIME			"FEC0"
#endif
#elif (CONFIG_FEC_ENET_DEV == 1)
#define IMX_FEC_BASE			ENET2_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x1
#define CONFIG_FEC_XCV_TYPE             RMII
#ifdef CONFIG_DM_ETH
#define CONFIG_ETHPRIME			"eth1"
#else
#define CONFIG_ETHPRIME			"FEC1"
#endif
#endif

#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_FEC_MXC_MDIO_BASE ENET2_BASE_ADDR
#endif

#endif