/* * (C) Copyright 2001, 2002, 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * Keith Outwater, keith_outwater@mvis.com` * Steven Scholz, steven.scholz@imc-berlin.de * * SPDX-License-Identifier: GPL-2.0+ */ /* * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) * DS1307 and DS1338/9 Real Time Clock (RTC). * * based on ds1337.c */ #include #include #include #include #include enum ds_type { ds_1307, ds_1337, ds_1340, mcp794xx, }; /* * RTC register addresses */ #define RTC_SEC_REG_ADDR 0x00 #define RTC_MIN_REG_ADDR 0x01 #define RTC_HR_REG_ADDR 0x02 #define RTC_DAY_REG_ADDR 0x03 #define RTC_DATE_REG_ADDR 0x04 #define RTC_MON_REG_ADDR 0x05 #define RTC_YR_REG_ADDR 0x06 #define RTC_CTL_REG_ADDR 0x07 #define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */ #define RTC_CTL_BIT_RS0 0x01 /* Rate select 0 */ #define RTC_CTL_BIT_RS1 0x02 /* Rate select 1 */ #define RTC_CTL_BIT_SQWE 0x10 /* Square Wave Enable */ #define RTC_CTL_BIT_OUT 0x80 /* Output Control */ /* MCP7941X-specific bits */ #define MCP7941X_BIT_ST 0x80 #define MCP7941X_BIT_VBATEN 0x08 #ifndef CONFIG_DM_RTC #if defined(CONFIG_CMD_DATE) /*---------------------------------------------------------------------*/ #undef DEBUG_RTC #ifdef DEBUG_RTC #define DEBUGR(fmt, args...) printf(fmt, ##args) #else #define DEBUGR(fmt, args...) #endif /*---------------------------------------------------------------------*/ #ifndef CONFIG_SYS_I2C_RTC_ADDR # define CONFIG_SYS_I2C_RTC_ADDR 0x68 #endif #if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000) # error The DS1307 is specified only up to 100kHz! #endif static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); /* * Get the current time from the RTC */ int rtc_get (struct rtc_time *tmp) { int rel = 0; uchar sec, min, hour, mday, wday, mon, year; #ifdef CONFIG_RTC_MCP79411 read_rtc: #endif sec = rtc_read (RTC_SEC_REG_ADDR); min = rtc_read (RTC_MIN_REG_ADDR); hour = rtc_read (RTC_HR_REG_ADDR); wday = rtc_read (RTC_DAY_REG_ADDR); mday = rtc_read (RTC_DATE_REG_ADDR); mon = rtc_read (RTC_MON_REG_ADDR); year = rtc_read (RTC_YR_REG_ADDR); DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x " "hr: %02x min: %02x sec: %02x\n", year, mon, mday, wday, hour, min, sec); #ifdef CONFIG_RTC_DS1307 if (sec & RTC_SEC_BIT_CH) { printf ("### Warning: RTC oscillator has stopped\n"); /* clear the CH flag */ rtc_write (RTC_SEC_REG_ADDR, rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH); rel = -1; } #endif #ifdef CONFIG_RTC_MCP79411 /* make sure that the backup battery is enabled */ if (!(wday & MCP7941X_BIT_VBATEN)) { rtc_write(RTC_DAY_REG_ADDR, wday | MCP7941X_BIT_VBATEN); } /* clock halted? turn it on, so clock can tick. */ if (!(sec & MCP7941X_BIT_ST)) { rtc_write(RTC_SEC_REG_ADDR, MCP7941X_BIT_ST); printf("Started RTC\n"); goto read_rtc; } #endif tmp->tm_sec = bcd2bin (sec & 0x7F); tmp->tm_min = bcd2bin (min & 0x7F); tmp->tm_hour = bcd2bin (hour & 0x3F); tmp->tm_mday = bcd2bin (mday & 0x3F); tmp->tm_mon = bcd2bin (mon & 0x1F); tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000); tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); tmp->tm_yday = 0; tmp->tm_isdst= 0; DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); return rel; } /* * Set the RTC */ int rtc_set (struct rtc_time *tmp) { DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); if (tmp->tm_year < 1970 || tmp->tm_year > 2069) printf("WARNING: year should be between 1970 and 2069!\n"); rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon)); #ifdef CONFIG_RTC_MCP79411 rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1) | MCP7941X_BIT_VBATEN); #else rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); #endif rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); #ifdef CONFIG_RTC_MCP79411 rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec) | MCP7941X_BIT_ST); #else rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); #endif return 0; } /* * Reset the RTC. We setting the date back to 1970-01-01. * We also enable the oscillator output on the SQW/OUT pin and program * it for 32,768 Hz output. Note that according to the datasheet, turning * on the square wave output increases the current drain on the backup * battery to something between 480nA and 800nA. */ void rtc_reset (void) { struct rtc_time tmp; rtc_write (RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */ rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0); tmp.tm_year = 1970; tmp.tm_mon = 1; tmp.tm_mday= 1; tmp.tm_hour = 0; tmp.tm_min = 0; tmp.tm_sec = 0; rtc_set(&tmp); printf ( "RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n", tmp.tm_year, tmp.tm_mon, tmp.tm_mday, tmp.tm_hour, tmp.tm_min, tmp.tm_sec); return; } /* * Helper functions */ static uchar rtc_read (uchar reg) { return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } #endif /* CONFIG_CMD_DATE*/ #endif /* !CONFIG_DM_RTC */ #ifdef CONFIG_DM_RTC static int ds1307_rtc_set(struct udevice *dev, const struct rtc_time *tm) { int ret; uchar buf[7]; enum ds_type type = dev_get_driver_data(dev); debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); if (tm->tm_year < 1970 || tm->tm_year > 2069) printf("WARNING: year should be between 1970 and 2069!\n"); buf[RTC_YR_REG_ADDR] = bin2bcd(tm->tm_year % 100); buf[RTC_MON_REG_ADDR] = bin2bcd(tm->tm_mon); buf[RTC_DAY_REG_ADDR] = bin2bcd(tm->tm_wday + 1); buf[RTC_DATE_REG_ADDR] = bin2bcd(tm->tm_mday); buf[RTC_HR_REG_ADDR] = bin2bcd(tm->tm_hour); buf[RTC_MIN_REG_ADDR] = bin2bcd(tm->tm_min); buf[RTC_SEC_REG_ADDR] = bin2bcd(tm->tm_sec); if (type == mcp794xx) { buf[RTC_DAY_REG_ADDR] |= MCP7941X_BIT_VBATEN; buf[RTC_SEC_REG_ADDR] |= MCP7941X_BIT_ST; } ret = dm_i2c_write(dev, 0, buf, sizeof(buf)); if (ret < 0) return ret; return 0; } static int ds1307_rtc_get(struct udevice *dev, struct rtc_time *tm) { int ret; uchar buf[7]; enum ds_type type = dev_get_driver_data(dev); read_rtc: ret = dm_i2c_read(dev, 0, buf, sizeof(buf)); if (ret < 0) return ret; if (type == ds_1307) { if (buf[RTC_SEC_REG_ADDR] & RTC_SEC_BIT_CH) { printf("### Warning: RTC oscillator has stopped\n"); /* clear the CH flag */ buf[RTC_SEC_REG_ADDR] &= ~RTC_SEC_BIT_CH; dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, buf[RTC_SEC_REG_ADDR]); return -1; } } if (type == mcp794xx) { /* make sure that the backup battery is enabled */ if (!(buf[RTC_DAY_REG_ADDR] & MCP7941X_BIT_VBATEN)) { dm_i2c_reg_write(dev, RTC_DAY_REG_ADDR, buf[RTC_DAY_REG_ADDR] | MCP7941X_BIT_VBATEN); } /* clock halted? turn it on, so clock can tick. */ if (!(buf[RTC_SEC_REG_ADDR] & MCP7941X_BIT_ST)) { dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, MCP7941X_BIT_ST); printf("Started RTC\n"); goto read_rtc; } } tm->tm_sec = bcd2bin(buf[RTC_SEC_REG_ADDR] & 0x7F); tm->tm_min = bcd2bin(buf[RTC_MIN_REG_ADDR] & 0x7F); tm->tm_hour = bcd2bin(buf[RTC_HR_REG_ADDR] & 0x3F); tm->tm_mday = bcd2bin(buf[RTC_DATE_REG_ADDR] & 0x3F); tm->tm_mon = bcd2bin(buf[RTC_MON_REG_ADDR] & 0x1F); tm->tm_year = bcd2bin(buf[RTC_YR_REG_ADDR]) + (bcd2bin(buf[RTC_YR_REG_ADDR]) >= 70 ? 1900 : 2000); tm->tm_wday = bcd2bin((buf[RTC_DAY_REG_ADDR] - 1) & 0x07); tm->tm_yday = 0; tm->tm_isdst = 0; debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); return 0; } static int ds1307_rtc_reset(struct udevice *dev) { int ret; struct rtc_time tmp = { .tm_year = 1970, .tm_mon = 1, .tm_mday = 1, .tm_hour = 0, .tm_min = 0, .tm_sec = 0, }; /* clear Clock Halt */ ret = dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, 0x00); if (ret < 0) return ret; ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0); if (ret < 0) return ret; ret = ds1307_rtc_set(dev, &tmp); if (ret < 0) return ret; debug("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n", tmp.tm_year, tmp.tm_mon, tmp.tm_mday, tmp.tm_hour, tmp.tm_min, tmp.tm_sec); return 0; } static int ds1307_probe(struct udevice *dev) { i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS | DM_I2C_CHIP_WR_ADDRESS); return 0; } static const struct rtc_ops ds1307_rtc_ops = { .get = ds1307_rtc_get, .set = ds1307_rtc_set, .reset = ds1307_rtc_reset, }; static const struct udevice_id ds1307_rtc_ids[] = { { .compatible = "dallas,ds1307", .data = ds_1307 }, { .compatible = "dallas,ds1337", .data = ds_1337 }, { .compatible = "dallas,ds1340", .data = ds_1340 }, { .compatible = "microchip,mcp7941x", .data = mcp794xx }, { } }; U_BOOT_DRIVER(rtc_ds1307) = { .name = "rtc-ds1307", .id = UCLASS_RTC, .probe = ds1307_probe, .of_match = ds1307_rtc_ids, .ops = &ds1307_rtc_ops, }; #endif /* CONFIG_DM_RTC */