Blame view
drivers/ata/pata_ixp4xx_cf.c
5.38 KB
0df0d0a0e [libata] ARM: add... |
1 2 |
/* * ixp4xx PATA/Compact Flash driver |
5d4c51f6b [libata] pata_ixp... |
3 |
* Copyright (C) 2006-07 Tower Technologies |
0df0d0a0e [libata] ARM: add... |
4 5 6 7 8 |
* Author: Alessandro Zummo <a.zummo@towertech.it> * * An ATA driver to handle a Compact Flash connected * to the ixp4xx expansion bus in TrueIDE mode. The CF * must have it chip selects connected to two CS lines |
5d4c51f6b [libata] pata_ixp... |
9 10 11 |
* on the ixp4xx. In the irq is not available, you might * want to modify both this driver and libata to run in * polling mode. |
0df0d0a0e [libata] ARM: add... |
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 |
* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/libata.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <scsi/scsi_host.h> #define DRV_NAME "pata_ixp4xx_cf" |
5d4c51f6b [libata] pata_ixp... |
27 |
#define DRV_VERSION "0.2" |
0df0d0a0e [libata] ARM: add... |
28 |
|
0260731f0 libata-link: link... |
29 |
static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error) |
0df0d0a0e [libata] ARM: add... |
30 |
{ |
f58229f80 libata-link: impl... |
31 |
struct ata_device *dev; |
0df0d0a0e [libata] ARM: add... |
32 |
|
1eca4365b libata: beef up i... |
33 |
ata_for_each_dev(dev, link, ENABLED) { |
a9a79dfec ata: Convert ata_... |
34 35 |
ata_dev_info(dev, "configured for PIO0 "); |
1eca4365b libata: beef up i... |
36 37 38 39 |
dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; |
0df0d0a0e [libata] ARM: add... |
40 |
} |
b229a7b0a libata: set_mode,... |
41 |
return 0; |
0df0d0a0e [libata] ARM: add... |
42 |
} |
55dba3120 libata: update ->... |
43 44 |
static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) |
0df0d0a0e [libata] ARM: add... |
45 46 47 48 |
{ unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; |
55dba3120 libata: update ->... |
49 |
struct ata_port *ap = dev->link->ap; |
59f998802 [libata] drivers:... |
50 |
void __iomem *mmio = ap->ioaddr.data_addr; |
0df0d0a0e [libata] ARM: add... |
51 52 53 54 55 56 57 58 59 |
struct ixp4xx_pata_data *data = ap->host->dev->platform_data; /* set the expansion bus in 16bit mode and restore * 8 bit mode after the transaction. */ *data->cs0_cfg &= ~(0x01); udelay(100); /* Transfer multiple of 2 bytes */ |
55dba3120 libata: update ->... |
60 |
if (rw == READ) |
0df0d0a0e [libata] ARM: add... |
61 62 |
for (i = 0; i < words; i++) buf16[i] = readw(mmio); |
55dba3120 libata: update ->... |
63 64 65 |
else for (i = 0; i < words; i++) writew(buf16[i], mmio); |
0df0d0a0e [libata] ARM: add... |
66 67 68 69 70 |
/* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { u16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; |
55dba3120 libata: update ->... |
71 |
if (rw == READ) { |
0df0d0a0e [libata] ARM: add... |
72 73 |
align_buf[0] = readw(mmio); memcpy(trailing_buf, align_buf, 1); |
55dba3120 libata: update ->... |
74 75 76 |
} else { memcpy(align_buf, trailing_buf, 1); writew(align_buf[0], mmio); |
0df0d0a0e [libata] ARM: add... |
77 |
} |
55dba3120 libata: update ->... |
78 |
words++; |
0df0d0a0e [libata] ARM: add... |
79 80 81 82 |
} udelay(100); *data->cs0_cfg |= 0x01; |
55dba3120 libata: update ->... |
83 84 |
return words << 1; |
0df0d0a0e [libata] ARM: add... |
85 |
} |
0df0d0a0e [libata] ARM: add... |
86 |
static struct scsi_host_template ixp4xx_sht = { |
68d1d07b5 libata: implement... |
87 |
ATA_PIO_SHT(DRV_NAME), |
0df0d0a0e [libata] ARM: add... |
88 89 90 |
}; static struct ata_port_operations ixp4xx_port_ops = { |
029cfd6b7 libata: implement... |
91 |
.inherits = &ata_sff_port_ops, |
5682ed33a libata: rename SF... |
92 |
.sff_data_xfer = ixp4xx_mmio_data_xfer, |
5d4c51f6b [libata] pata_ixp... |
93 |
.cable_detect = ata_cable_40wire, |
029cfd6b7 libata: implement... |
94 |
.set_mode = ixp4xx_set_mode, |
0df0d0a0e [libata] ARM: add... |
95 |
}; |
af1837480 pata_ixp4xx_cf: f... |
96 |
static void ixp4xx_setup_port(struct ata_port *ap, |
cbcdd8759 libata: implement... |
97 98 |
struct ixp4xx_pata_data *data, unsigned long raw_cs0, unsigned long raw_cs1) |
0df0d0a0e [libata] ARM: add... |
99 |
{ |
af1837480 pata_ixp4xx_cf: f... |
100 |
struct ata_ioports *ioaddr = &ap->ioaddr; |
cbcdd8759 libata: implement... |
101 102 |
unsigned long raw_cmd = raw_cs0; unsigned long raw_ctl = raw_cs1 + 0x06; |
0d5ff5667 libata: convert t... |
103 104 105 |
ioaddr->cmd_addr = data->cs0; ioaddr->altstatus_addr = data->cs1 + 0x06; ioaddr->ctl_addr = data->cs1 + 0x06; |
0df0d0a0e [libata] ARM: add... |
106 |
|
9363c3825 libata: rename SF... |
107 |
ata_sff_std_ports(ioaddr); |
0df0d0a0e [libata] ARM: add... |
108 109 110 111 112 113 |
#ifndef __ARMEB__ /* adjust the addresses to handle the address swizzling of the * ixp4xx in little endian mode. */ |
0d5ff5667 libata: convert t... |
114 115 116 117 118 119 120 121 122 123 124 125 126 |
*(unsigned long *)&ioaddr->data_addr ^= 0x02; *(unsigned long *)&ioaddr->cmd_addr ^= 0x03; *(unsigned long *)&ioaddr->altstatus_addr ^= 0x03; *(unsigned long *)&ioaddr->ctl_addr ^= 0x03; *(unsigned long *)&ioaddr->error_addr ^= 0x03; *(unsigned long *)&ioaddr->feature_addr ^= 0x03; *(unsigned long *)&ioaddr->nsect_addr ^= 0x03; *(unsigned long *)&ioaddr->lbal_addr ^= 0x03; *(unsigned long *)&ioaddr->lbam_addr ^= 0x03; *(unsigned long *)&ioaddr->lbah_addr ^= 0x03; *(unsigned long *)&ioaddr->device_addr ^= 0x03; *(unsigned long *)&ioaddr->status_addr ^= 0x03; *(unsigned long *)&ioaddr->command_addr ^= 0x03; |
cbcdd8759 libata: implement... |
127 128 129 |
raw_cmd ^= 0x03; raw_ctl ^= 0x03; |
0df0d0a0e [libata] ARM: add... |
130 |
#endif |
cbcdd8759 libata: implement... |
131 132 |
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl); |
0df0d0a0e [libata] ARM: add... |
133 |
} |
0ec249146 Drivers: ata: rem... |
134 |
static int ixp4xx_pata_probe(struct platform_device *pdev) |
0df0d0a0e [libata] ARM: add... |
135 |
{ |
0df0d0a0e [libata] ARM: add... |
136 137 |
unsigned int irq; struct resource *cs0, *cs1; |
5d728824e libata: convert t... |
138 139 |
struct ata_host *host; struct ata_port *ap; |
0df0d0a0e [libata] ARM: add... |
140 141 142 143 144 145 146 |
struct ixp4xx_pata_data *data = pdev->dev.platform_data; cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!cs0 || !cs1) return -EINVAL; |
5d728824e libata: convert t... |
147 148 149 150 151 152 |
/* allocate host */ host = ata_host_alloc(&pdev->dev, 1); if (!host) return -ENOMEM; /* acquire resources and fill host */ |
284901a90 dma-mapping: repl... |
153 |
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); |
0df0d0a0e [libata] ARM: add... |
154 |
|
24dc5f33e libata: update li... |
155 156 |
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000); data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000); |
0df0d0a0e [libata] ARM: add... |
157 |
|
991bf528f drivers/ata/pata_... |
158 159 |
if (!data->cs0 || !data->cs1) return -ENOMEM; |
0df0d0a0e [libata] ARM: add... |
160 161 |
irq = platform_get_irq(pdev, 0); if (irq) |
dced35aeb drivers: Final ir... |
162 |
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); |
0df0d0a0e [libata] ARM: add... |
163 164 165 166 |
/* Setup expansion bus chip selects */ *data->cs0_cfg = data->cs0_bits; *data->cs1_cfg = data->cs1_bits; |
5d728824e libata: convert t... |
167 |
ap = host->ports[0]; |
0df0d0a0e [libata] ARM: add... |
168 |
|
5d728824e libata: convert t... |
169 |
ap->ops = &ixp4xx_port_ops; |
14bdef982 [libata] convert ... |
170 |
ap->pio_mask = ATA_PIO4; |
9cbe056f6 libata: remove AT... |
171 |
ap->flags |= ATA_FLAG_NO_ATAPI; |
0df0d0a0e [libata] ARM: add... |
172 |
|
cbcdd8759 libata: implement... |
173 |
ixp4xx_setup_port(ap, data, cs0->start, cs1->start); |
0df0d0a0e [libata] ARM: add... |
174 |
|
06296a1e6 ata: Add and use ... |
175 |
ata_print_version_once(&pdev->dev, DRV_VERSION); |
0df0d0a0e [libata] ARM: add... |
176 |
|
5d728824e libata: convert t... |
177 |
/* activate host */ |
9363c3825 libata: rename SF... |
178 |
return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht); |
0df0d0a0e [libata] ARM: add... |
179 |
} |
0df0d0a0e [libata] ARM: add... |
180 181 182 183 184 185 |
static struct platform_driver ixp4xx_pata_platform_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, }, .probe = ixp4xx_pata_probe, |
58d0ff2f0 pata_ixp4xx_cf: u... |
186 |
.remove = ata_platform_remove_one, |
0df0d0a0e [libata] ARM: add... |
187 |
}; |
99c8ea3e5 SATA/PATA: conver... |
188 |
module_platform_driver(ixp4xx_pata_platform_driver); |
0df0d0a0e [libata] ARM: add... |
189 190 191 192 193 |
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); |
458622fcd ATA/IDE: fix plat... |
194 |
MODULE_ALIAS("platform:" DRV_NAME); |