Blame view
drivers/ata/pata_triflex.c
6.71 KB
669a5db41 [libata] Add a bu... |
1 2 3 |
/* * pata_triflex.c - Compaq PATA for new ATA layer * (C) 2005 Red Hat Inc |
ab7716300 ata: Switch all m... |
4 |
* Alan Cox <alan@lxorguk.ukuu.org.uk> |
669a5db41 [libata] Add a bu... |
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 |
* * based upon * * triflex.c * * IDE Chipset driver for the Compaq TriFlex IDE controller. * * Known to work with the Compaq Workstation 5x00 series. * * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. * Author: Torben Mathiasen <torben.mathiasen@hp.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Loosely based on the piix & svwks drivers. * * Documentation: |
25985edce Fix common misspe... |
33 |
* Not publicly available. |
669a5db41 [libata] Add a bu... |
34 35 36 37 38 39 40 41 42 43 44 45 |
*/ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #define DRV_NAME "pata_triflex" |
a0fcdc025 [libata] Update s... |
46 |
#define DRV_VERSION "0.2.8" |
669a5db41 [libata] Add a bu... |
47 48 |
/** |
c961922b7 [PATCH] libata-eh... |
49 |
* triflex_prereset - probe begin |
cc0680a58 libata-link: link... |
50 |
* @link: ATA link |
d4b2bab4f libata: add deadl... |
51 |
* @deadline: deadline jiffies for the operation |
669a5db41 [libata] Add a bu... |
52 53 54 |
* * Set up cable type and use generic probe init */ |
cc0680a58 libata-link: link... |
55 |
static int triflex_prereset(struct ata_link *link, unsigned long deadline) |
669a5db41 [libata] Add a bu... |
56 57 58 59 60 |
{ static const struct pci_bits triflex_enable_bits[] = { { 0x80, 1, 0x01, 0x01 }, { 0x80, 1, 0x02, 0x02 } }; |
cc0680a58 libata-link: link... |
61 |
struct ata_port *ap = link->ap; |
669a5db41 [libata] Add a bu... |
62 |
struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
85cd7251b [libata #pata-dri... |
63 |
|
c961922b7 [PATCH] libata-eh... |
64 65 |
if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) return -ENOENT; |
d4b2bab4f libata: add deadl... |
66 |
|
9363c3825 libata: rename SF... |
67 |
return ata_sff_prereset(link, deadline); |
669a5db41 [libata] Add a bu... |
68 |
} |
669a5db41 [libata] Add a bu... |
69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 |
/** * triflex_load_timing - timing configuration * @ap: ATA interface * @adev: Device on the bus * @speed: speed to configure * * The Triflex has one set of timings per device per channel. This * means we must do some switching. As the PIO and DMA timings don't * match we have to do some reloading unlike PIIX devices where tuning * tricks can avoid it. */ static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 timing = 0; u32 triflex_timing, old_triflex_timing; int channel_offset = ap->port_no ? 0x74: 0x70; unsigned int is_slave = (adev->devno != 0); pci_read_config_dword(pdev, channel_offset, &old_triflex_timing); triflex_timing = old_triflex_timing; switch(speed) { case XFER_MW_DMA_2: timing = 0x0103;break; case XFER_MW_DMA_1: timing = 0x0203;break; case XFER_MW_DMA_0: timing = 0x0808;break; case XFER_SW_DMA_2: case XFER_SW_DMA_1: case XFER_SW_DMA_0: timing = 0x0F0F;break; case XFER_PIO_4: timing = 0x0202;break; case XFER_PIO_3: timing = 0x0204;break; case XFER_PIO_2: timing = 0x0404;break; case XFER_PIO_1: timing = 0x0508;break; case XFER_PIO_0: timing = 0x0808;break; default: BUG(); } triflex_timing &= ~ (0xFFFF << (16 * is_slave)); triflex_timing |= (timing << (16 * is_slave)); if (triflex_timing != old_triflex_timing) pci_write_config_dword(pdev, channel_offset, triflex_timing); } /** * triflex_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device * * Use the timing loader to set up the PIO mode. We have to do this * because DMA start/stop will only be called once DMA occurs. If there * has been no DMA then the PIO timings are still needed. */ static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev) { triflex_load_timing(ap, adev, adev->pio_mode); } /** * triflex_dma_start - DMA start callback * @qc: Command in progress * * Usually drivers set the DMA timing at the point the set_dmamode call * is made. Triflex however requires we load new timings on the * transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc). * We load the DMA timings just before starting DMA and then restore * the PIO timing when the DMA is finished. */ static void triflex_bmdma_start(struct ata_queued_cmd *qc) { triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode); ata_bmdma_start(qc); } /** * triflex_dma_stop - DMA stop callback * @ap: ATA interface * @adev: ATA device * * We loaded new timings in dma_start, as a result we need to restore * the PIO timings in dma_stop so that the next command issue gets the * right clock values. */ static void triflex_bmdma_stop(struct ata_queued_cmd *qc) { ata_bmdma_stop(qc); triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode); } static struct scsi_host_template triflex_sht = { |
68d1d07b5 libata: implement... |
173 |
ATA_BMDMA_SHT(DRV_NAME), |
669a5db41 [libata] Add a bu... |
174 175 176 |
}; static struct ata_port_operations triflex_port_ops = { |
029cfd6b7 libata: implement... |
177 |
.inherits = &ata_bmdma_port_ops, |
669a5db41 [libata] Add a bu... |
178 179 |
.bmdma_start = triflex_bmdma_start, .bmdma_stop = triflex_bmdma_stop, |
029cfd6b7 libata: implement... |
180 181 |
.cable_detect = ata_cable_40wire, .set_piomode = triflex_set_piomode, |
a1efdaba2 libata: make rese... |
182 |
.prereset = triflex_prereset, |
669a5db41 [libata] Add a bu... |
183 184 185 186 |
}; static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { |
1626aeb88 libata: clean up ... |
187 |
static const struct ata_port_info info = { |
1d2808fd3 [libata] PATA dri... |
188 |
.flags = ATA_FLAG_SLAVE_POSS, |
14bdef982 [libata] convert ... |
189 190 |
.pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, |
669a5db41 [libata] Add a bu... |
191 192 |
.port_ops = &triflex_port_ops }; |
1626aeb88 libata: clean up ... |
193 |
const struct ata_port_info *ppi[] = { &info, NULL }; |
669a5db41 [libata] Add a bu... |
194 195 196 197 198 |
static int printed_version; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION " "); |
1c5afdf7a libata-sff: separ... |
199 |
return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0); |
669a5db41 [libata] Add a bu... |
200 201 202 |
} static const struct pci_device_id triflex[] = { |
2d2744fc8 [libata] PCI ID t... |
203 204 205 |
{ PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), }, { }, |
669a5db41 [libata] Add a bu... |
206 |
}; |
bfeec8ca1 ATA: Don't powerd... |
207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 |
#ifdef CONFIG_PM static int triflex_ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct ata_host *host = dev_get_drvdata(&pdev->dev); int rc = 0; rc = ata_host_suspend(host, mesg); if (rc) return rc; /* * We must not disable or powerdown the device. * APM bios refuses to suspend if IDE is not accessible. */ pci_save_state(pdev); return 0; } #endif |
669a5db41 [libata] Add a bu... |
227 |
static struct pci_driver triflex_pci_driver = { |
2d2744fc8 [libata] PCI ID t... |
228 |
.name = DRV_NAME, |
669a5db41 [libata] Add a bu... |
229 230 |
.id_table = triflex, .probe = triflex_init_one, |
30ced0f0d [PATCH] PATA liba... |
231 |
.remove = ata_pci_remove_one, |
438ac6d5e libata: add missi... |
232 |
#ifdef CONFIG_PM |
bfeec8ca1 ATA: Don't powerd... |
233 |
.suspend = triflex_ata_pci_device_suspend, |
30ced0f0d [PATCH] PATA liba... |
234 |
.resume = ata_pci_device_resume, |
438ac6d5e libata: add missi... |
235 |
#endif |
669a5db41 [libata] Add a bu... |
236 237 238 239 240 241 |
}; static int __init triflex_init(void) { return pci_register_driver(&triflex_pci_driver); } |
669a5db41 [libata] Add a bu... |
242 243 244 245 |
static void __exit triflex_exit(void) { pci_unregister_driver(&triflex_pci_driver); } |
669a5db41 [libata] Add a bu... |
246 247 248 249 250 251 252 253 |
MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for Compaq Triflex"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, triflex); MODULE_VERSION(DRV_VERSION); module_init(triflex_init); module_exit(triflex_exit); |